Qureos Mentor

CRRC (Hong Kong), Dubai Branch

Job Title:QA/QC Engineer &ndash; Railway / Metro InfrastructurePurpose of the RoleTo ensure that all construction, installation, and system works for railway and metro projects are executed in compliance with contract specifications, client requirements, and international quality standards. The QA/QC Engineer is responsible for implementing and monitoring Quality Management Systems (QMS) and ensuring continual improvement throughout the project lifecycle.Key Responsibilities1. Quality Planning &amp; System Implementation<ul><li>Assist in developing and maintaining the Project Quality Plan (PQP) in line with ISO 9001:2015 and client quality requirements (e.g., RTA, Etihad Rail, DoT).</li><li>Implement Inspection and Test Plans (ITPs), Method Statements, and Quality Checklists for all civil, MEP, and systems works.</li><li>Ensure contractor and subcontractor compliance with approved QA/QC procedures and specifications.</li><li>Support the development of document control systems and maintain quality documentation (drawings, test certificates, NCRs, reports).</li></ul>2. Inspection &amp; Testing<ul><li>Conduct daily inspections of construction and system installation activities (track, tunnels, viaducts, stations, signalling, power, telecoms).</li><li>Verify materials and workmanship against approved drawings and specifications.</li><li>Monitor material testing (concrete, steel, ballast, cables, etc.) through approved laboratories.</li><li>Ensure that calibration and test records are properly maintained and traceable.</li><li>Participate in Factory Acceptance Tests (FATs), Site Acceptance Tests (SATs), and commissioning inspections as required.</li></ul>3. Non-Conformance &amp; Corrective Actions<ul><li>Identify non-conformances (NCRs), issue reports, and track them until closure.</li><li>Support root cause analysis (RCA) and implement corrective and preventive actions (CAPA).</li><li>Work with contractors and consultants to resolve quality issues without impacting project progress.</li></ul>4. Audit &amp; Compliance<ul><li>Conduct internal and external quality audits in coordination with the QA/QC Manager and client representatives.</li><li>Verify compliance with UAE regulatory bodies and client-specific standards.</li><li>Participate in audits conducted by client (RTA, Etihad Rail DB) or third-party certification agencies.</li><li>Support continuous improvement and lessons-learned programs.</li></ul>5. Reporting &amp; Documentation<ul><li>Maintain accurate QA/QC logs and generate daily, weekly, and monthly quality reports for management and client submission.</li><li>Prepare inspection summary reports, material approval logs, and non-conformance registers.</li><li>Maintain as-built documentation and quality handover dossiers for final acceptance.</li></ul>6. Health, Safety, and Environmental Coordination<ul><li>Support HSE compliance and ensure that quality activities are integrated with safety requirements.</li><li>Report quality-related safety issues and participate in joint quality-safety inspections.</li></ul>Qualifications &amp; ExperienceEducationBachelor&rsquo;s degree in civil, Mechanical, Electrical, or Quality Engineering. Master&rsquo;s degree is an advantage.Experience7&ndash;12 years of experience in QA/QC within railway, metro, infrastructure, or heavy civil projects, with at least 3&ndash;5 years in the UAE or GCC.Industry ExpertiseCivil structures (tunnels, viaducts, stations), track works, systems (signaling, E&amp;M, telecoms, SCADA), and depot facilities.CertificationsISO 9001:2015 Lead Auditor (IRCA), IRIS Certification, PMP or equivalent preferred.SoftwareMS Office, AutoCAD (for reference), EDMS systems (Aconex, Asite, SharePoint).KnowledgeUAE construction codes, RTA/Etihad Rail standards, FIDIC contracts, and EN 50126/50128 quality standards.LanguageExcellent English (verbal &amp; written); Arabic is an advantage.Job Type: Full-time

QA/QC Engineer

Department: Quality and Safety DepartmentReports to: RSY System Assurance managerJob PurposeThe Safety Engineer is responsible for the entire life cycle of all RSK subsystems, leading hazard identification, risk analysis, safety requirement allocation, V&amp;V and safety confirmation to ensure that the products meet the requirements of standards such as EN 50126/8/9, IEC 61508, ISO 26262, UL 991/1998, and obtain third-party independent safety assessment (ISA) certificates. Take the lead in identifying and meeting the safety requirements of the contract, and coordinate with subcontractors to complete various documents and meeting discussions to meet client requirements.Main Responsibilities1. Organize and prepare project safety plans (Safety Plan) and safety verification and validation plans (SVVP);2. Lead Preliminary Hazard Analysis (PHA), Interface Hazard Analysis (IHA), Subsystem Hazard Analysis (SSHA), System Hazard Analysis (SHA), Operating &amp; Support Hazard Analysis (OSHA), as well as Fault Tree Analysis/Event Tree Analysis (FTA/ETA);3. Establish Hazard Logs, conduct risk matrix assessments (Severity, Probability, Exposure, Detectability) for each hazard, propose risk mitigation measures, and track closure;4. Decompose safety requirements (Safety Requirement) to hardware and software levels, participate in drafting safety requirement specifications (SRS) and safety manuals (Safety Manual);5. Lead end-to-end engagement for Independent Safety Assessment (ISA)/third-party certification (T&Uuml;V, S&Uuml;D, DNV, CCF), and organize stage-gate reviews (Stage-Gate 0-5);6. Support functional safety testing (Fault Injection, EMC, FMEA-MSR, DFA) and review test reports;7. Define Safety Case structure, collect evidence, complete compliance matrices (Compliance Matrix), and deliver final Safety Case Reports;8. Conduct safety impact assessments for field changes, operational incidents, and safety bulletins (Safety Bulletin), and update Hazard Logs and Safety Cases accordingly;9. Participate in various meetings with users and C-ISA/E-ISA, respond to and discuss feedback, and coordinate timely responses and discussions with subcontractors on document comments;10. Conduct hazard argumentation and discussions in Doors NG, close out evidence, and ensure proper documentation;11. Monitor and close risks and measures arising at various stages, and oversee vehicle acceptance and delivery;12. Provide solutions and responses to safety-related issues raised by users, and review and respond to proposals submitted by subcontractors.13. except for normal disciplines safety monitoring,fire safety and human error etc.are also should be known well.14.Monitor and ensure the target of Safety allocation be achieved according the requirement.15.Coordinate subsystem to push and complete deliverable on baseline and schedule. All of key milestone should be met on time.Continuously monitor safety performance and recommend improvements to management.QualificationsEducation: Bachelor&rsquo;s degree in Safety Engineering, Environmental Engineering, Civil/Mechanical Engineering, or related field.Certifications: Training or get to know the standards EN 50126/8/9&#12289;IEC 61508&#12289;ISO 26262&#12289;AREMA&#12289;IEEE 1474(not limited).Experience: Minimum 5&ndash;7 years in HSE, preferably in railway, metro, or large-scale infrastructure projects.Key CompetenciesProficient in systems safety engineering principles (V-Model, safety lifecycle, risk matrix ALARP principle);Possesses hazard identification and risk modeling capabilities with the ability to balance the &quot;safety-cost-schedule&quot; triple constraints;Advanced mastery of Excel (risk matrix templates, Hazard Log dynamic tracking) and PowerPoint (client safety review presentations);Proficient in Hazard Analysis methodologies: PHA, IHA, SSHA, SHA, OSHA, FMEA/FMECA, DFA, FTA, ETA, DFD, and STPA.Familiar with Safety Integrity Level allocation: SIL 1-4, SIL 0, ASIL A-D, and PL a-e.Experienced with safety-related tools: Medini Analyze, Ansys, DOORS, Reqtify, Isograph, CAFTA, and FaultTree+.Knowledgeable in verification methods: Fault Injection, EMC, Fire &amp; Smoke, V&amp;V Matrix, and Safety Case Argument-Claim-Evidence (ACE) structure.Preference given to candidates with understanding of Safety &amp; Cybersecurity Co-Analysis.Prior experience in automating Hazard Log and evidence chain verification using Python/MATLAB scripting is highly desirable.Excellent communication, reporting, and training skills.Analytical and problem-solving abilities.Leadership and teamwork skills to influence safe practices at all levels.High attention to detail and commitment to safety culture.Have ability to anticipate and identify risks of project.Have good communication and coordination skills.Work AttitudeProactive and safety-conscious mindset.Ability to work under pressure in a fast-paced construction/project environment.Strong ethical standards and integrity.Job Type: Full-timePay: From AED10,000.00 per month

Safety Engineer

Department: Quality and Safety DepartmentReports to: RSY System Assurance managerJob Purpose:To ensure the reliability, availability, maintainability, and safety (RAMS) compliance of railway and metro systems. The RAMS Engineer will support the project team by conducting system assurance activities including human factor, fire safety etc., risk assessments, and safety analysis in accordance with international standards and project requirements.Main Responsibilities:Conduct RAMS studies (Reliability, Availability, Maintainability, Safety) for metro and railway systems in compliance with EN 50126, EN 50128, EN 50129 (not limited)standards.Perform hazard identification and risk assessments (FMEA, FTA, Hazard Log management).Prepare and review Safety Cases and ensure approvals from relevant authorities.Ensure all engineering designs and operations comply with international safety and quality standards.Collaborate with design, system integration, and operations teams to address RAMS requirements throughout the project lifecycle.Develop RAMS reports and documentation to support project assurance and client submissions.Monitor contractors&rsquo; and suppliers&rsquo; compliance with RAMS requirements.Provide technical input during system integration, testing, and commissioning phases.Support incident investigations and root cause analysis related to system failures or safety issues.Human factor, EMC, Noise/ Vibration, Earth etc. should be familiar and cooperate with subsystem to finish some related work.Monitor and ensure the target of RAM allocation be achieved according the requirement.Coordinate subsystem to push and complete deliverable on baseline and schedule. All of key milestone should be met on time.Have ability to anticipate and identify risks of project.Have good communication and coordination skills.Qualifications &amp; Experience:Bachelor&rsquo;s degree in Electrical / Electronics / Mechanical / Industrial Engineering or related field.Minimum 5&ndash;7 years of experience in RAMS Engineering, with at least 3 years in metro or railway projects (mandatory).Proven experience with safety and RAMS standards (EN 50126/28/29).Experience in system assurance, hazard analysis, and safety case preparation.Strong knowledge of railway signaling, telecom, rolling stock, and system integration.Familiarity with UAE / international railway safety regulations is an advantage.Skills &amp; Competencies:Strong analytical and problem-solving skills.Excellent communication and reporting skills (English essential, Arabic/Chinese is an advantage).Ability to work effectively with multinational project teams.Proficient in RAMS tools/software (e.g., reliability block diagrams, fault tree analysis).Attention to detail and commitment to safety assurance.Get to know Doors NG and Isograph software.Work Attitude:High sense of responsibility and accountability.Team-oriented with proactive approach.Ability to work under pressure and meet project deadlines.Job Type: Full-timePay: From AED10,000.00 per month

RAMS Engineer

Job Title:Planning Manager &ndash; Railway / Metro InfrastructurePurpose of the RoleTo lead and manage all project planning, scheduling, and monitoring activities for railway and metro projects. The Planning Manager ensures accurate, timely, and proactive planning to meet project milestones, optimize resources, and mitigate risks, supporting successful delivery of civil, track, systems, E&amp;M, and operational works.Key Responsibilities1. Project Planning &amp; Scheduling<ul><li>Develop and maintain the Master Project Schedule covering all civil, systems, signaling, E&amp;M, and commissioning activities.</li><li>Prepare detailed work breakdown structures (WBS) and phase-level schedules.</li><li>Coordinate with engineering, procurement, construction, QA/QC, and commissioning teams to ensure realistic and achievable schedules.</li><li>Implement schedule baseline and updates, reflecting progress, risks, and changes.</li></ul>2. Monitoring &amp; Reporting<ul><li>Track project progress against baseline schedule using Primavera P6 or equivalent tools.</li><li>Identify and analyze schedule variances, delays, and potential bottlenecks.</li><li>Prepare and submit weekly/monthly schedule reports, including progress dashboards and KPI analysis, for management and client review.</li><li>Conduct forecasting and look-ahead planning to mitigate delays.</li></ul>3. Resource &amp; Risk Management<ul><li>Assist in resource allocation planning across multiple disciplines and subcontractors.</li><li>Collaborate with project controls and management teams to identify schedule risks and mitigation strategies.</li><li>Support change management processes and integrate schedule impacts of variations, RFIs, and design changes.</li></ul>4. Stakeholder Coordination<ul><li>Act as a focal point for schedule coordination with clients (RTA, Etihad Rail), consultants, and contractors.</li><li>Participate in progress review meetings, coordination meetings, and workshops.</li><li>Ensure that schedule requirements are communicated effectively to all project teams.</li></ul>5. System Implementation &amp; Continuous Improvement<ul><li>Implement project planning tools, procedures, and reporting systems in compliance with client and corporate standards.</li><li>Support lessons-learned initiatives to improve planning efficiency and accuracy.</li><li>Develop and maintain planning procedures, templates, and guidance documents.</li></ul>Qualifications &amp; ExperienceRequirementDetailsEducationBachelor&rsquo;s Degree in Civil, Mechanical, Electrical Engineering, or Project Management. Master&rsquo;s preferred.Experience10-15&ndash; years of project planning experience, including 6+ years in railway/metro projects in UAE or GCC.Industry KnowledgeCivil infrastructure, track, tunnels, stations, depots, signaling, E&amp;M systems, and commissioning.CertificationsPrimavera P6 certification, PMP or Prince2 preferred.SoftwarePrimavera P6, MS Project, MS Office, project management dashboards.LanguageExcellent English (written &amp; verbal); Arabic is an advantage.Job Type: Full-time

Planning Manager

Job Purpose:The Installation Designer &ndash; CAD is responsible for developing detailed installation and shop drawings related to metro system works. The role ensures that all layouts comply with design requirements, standards, and coordination needs across multiple disciplines &mdash; electrical, mechanical, civil, and systems &mdash; to support efficient on-site installation and project delivery.Key Responsibilities:Prepare and update installation drawings (cable routing, conduit, trays, equipment supports, brackets, and raceways) using AutoCAD / MicroStation / Revit or other CAD/BIM platforms.Produce shop drawings, coordination drawings, and as-built drawings according to site progress and design updates.Coordinate with design engineers, BIM modelers, and site installation teams to ensure accurate and clash-free layouts.Apply relevant project standards, codes, and specifications (RTA, DEWA, or consultant guidelines).Maintain proper drawing control, revision tracking, and documentation following the project QA/QC system.Assist in design coordination meetings and provide CAD support for technical discussions and interface coordination.Support BIM integration by ensuring consistency between 2D drawings and 3D models.Qualifications &amp; Experience:Diploma or Bachelor&rsquo;s degree in Electrical / Mechanical / Civil Engineering or a related discipline.7&ndash;10 years of CAD drafting experience in metro, railway, or infrastructure projects.Strong proficiency in AutoCAD and/or MicroStation; basic familiarity with Revit and BIM coordination preferred.Understanding of installation standards for systems such as power, communication, signaling, or MEP.Excellent attention to detail and ability to interpret engineering drawings and technical specifications.Strong teamwork and communication skills in a multidisciplinary, multicultural project environment.Preferred Skills &amp; Competencies:Previous experience in metro or rail system projects (stations, tunnels, depots, or trackside works).Knowledge of RTA or major consultant design submission procedures in the UAE.Familiarity with Navisworks for clash detection and coordination.Understanding of BIM 360 / ProjectWise / Aconex document management systems.Ability to manage multiple drawing packages and work under tight deadlines.Strong commitment to quality, accuracy, and safety in all design deliverables.Job Type: Full-timePay: From AED20,000.00 per month

Installation Designer – CAD

Job OverviewWe are looking for a highly skilled Installation Designer &ndash; BIM to join our multidisciplinary engineering team.The ideal candidate will have experience in design coordination, BIM modeling, and installation layout for complex infrastructure and metro projects.This role requires strong technical and communication skills to ensure seamless integration of mechanical, electrical, and system installations within the BIM environment.Key Responsibilities1-Develop and maintain accurate 3D BIM models for MEP, Communication, and System Installations using Revit, Navisworks, and AutoCAD.2-Coordinate and resolve clashes between disciplines (civil, architecture, structure, and systems) through BIM collaboration workflows.3-Generate shop drawings, as-built drawings, and detailed installation plans aligned with site execution requirements.4-Work closely with design leads and construction teams to ensure design intent and constructability are maintained.5-Implement and follow BIM Execution Plans (BEP) and project standards in compliance with ISO 19650.6-Participate in technical coordination and design review meetings, providing BIM-related support and visualizations.7-Contribute to 4D (scheduling) and 5D (quantity) BIM integration to support project planning and cost management.8-Ensure data accuracy, version control, and documentation throughout all design phases.Qualifications &amp; Skills1-Bachelor&rsquo;s Degree in Mechanical, Electrical, Civil, or Architectural Engineering.2-Minimum 7-10 years of BIM-based design experience, preferably in metro, rail, or large-scale infrastructure projects.3-Advanced proficiency in Autodesk Revit, Navisworks Manage, AutoCAD, and BIM 360 / ACC.4-Good understanding of MEP systems, installation methods, and coordination principles.5-Knowledge of international BIM standards (ISO 19650, PAS 1192).6-Strong analytical, coordination, and documentation skills.7-Ability to work effectively in a multi-disciplinary, multicultural environment.8-Fluent in English (written and spoken).Job Type: Full-timePay: From AED20,000.00 per month

Installation Designer – BIM

Join CRRC (Hong Kong), Dubai Branch and explore 6   exciting career opportunities. They're hiring for various roles with options for remote or on-site work. Apply today and become part of their innovative team.