aircraft mechanic ii (uh-60) - buehring, kuwait

aircraft technical inspector (ch-47) - buehring, kuwait

aviation life support equipment (alse) technician - buehring, kuwait

aircraft mechanic ii (uh-60) - buehring, kuwait Jobs in Farwaniya

aircraft servicer

aircraft technical inspector (ch-47) - buehring, kuwait Jobs in Farwaniya

assistant boutique manager - kuwait Jobs in Farwaniya

assistant boutique manager - kuwait

aviation life support equipment (alse) technician - buehring, kuwait Jobs in Farwaniya

aircraft mechanic ii uh 60 buehring kuwait

Amentum

<div><div>The UH-60 Aircraft Mechanic AM-2 (UH-60 Army Aviation) performs the full range of military tactical aircraft maintenance and maintains repairs and troubleshoots malfunctions in aircraft structure, landing gear, flight surfaces and controls, anti-icing, pneudraulic, engines, auxiliary power unit, and ventilation and heating systems.</div><div><div><div><div><div><div><div><div><div>
<ul>
<li>With a valid (FAA) A&amp;P certificate (Preferred), Two (2) years of aviation maintenance experience, Two (2) years rotary wing aircraft experience, and Two (2) years on the assigned MDS UH-60 aircraft is Required. (See below for requirements without A&amp;P).</li>
<li>
Valid US Passport and US Citizenship is Required to obtain the NAC-I clearance and for facility access.</li>
<li>
Remove and install aircraft subsystem assemblies and components such as engines, rotors, transmissions, mechanical flight controls and their components.</li>
<li>
Safely prepare aircraft for inspections and maintenance checks and services.</li>
<li>
Perform scheduled inspections and assist in performing special inspections.</li>
<li>
Perform limited maintenance operational checks and diagnoses and troubleshoots aircraft systems using special tools and test equipment as required.</li>
<li>
Apply comprehensive technical expertise to solve moderate to complex problems by interpreting technical documentation such as aircraft Technical Manuals, Maintenance Information and Action Messages and all technical guidance provided through government official representatives.</li>
<li>
Maintain and repair aircraft components including but not limited to flight controls, engines, hydraulics, pneumatics, fuel systems, and mechanical components.</li>
<li>
Apply technical knowledge of airframe and power plant systems in determining equipment malfunctions and use required expertise in restoring equipment condition and or operation.</li>
<li>
Participate in maintenance test flights and operation checks as required.</li>
<li>
Perform other duties as requested.</li>
</ul>
Minimum Requirements:
<ul>
<li>High School Diploma or Equivalent is required.</li>
<li>
With a valid (FAA) A&amp;P certificate, Two (2) years of aviation maintenance experience, Two (2) years rotary wing aircraft experience, and Two (2) years on the assigned MDS UH-60 aircraft is Required.</li>
<li>
All experience must be within the Five (5) most recent years.</li>
<li>
Without a valid (FAA) A&amp;P certificate; Must have Three (3) years aviation maintenance experience, Three (3) years of rotary wing aircraft experience, and a minimum of Three (3) years on the assigned UH-60 Mission Design Series (MDS) is Required.</li>
<li>
All experience must be within the Six (6) most recent years.</li>
<li>
U.S. Military Technical school or specialized training course is desired, certification of education level is required.</li>
<li>
A Valid US Passport is Required for deployment to Kuwait. The Passport must have 3 years remaining before expiring, and 6 Blank pages available at the time of hire and deployment.</li>
<li>
Must be able to pass and clear CENTCOM Army MOD Physical and requirements for deployment (will attend CRC/ DIDC Training).</li>
<li>
Must be able to obtain Kuwait PCC clearance and Visa, prior to deployment.</li>
</ul>
Security Clearance Requirements:
<ul><li>
Must be able to obtain and maintain a US Govt NAC-I (T1) Public Trust Security Clearance. Must be able to obtain and maintain facility credentials/authorization. US Citizenship is required to obtain a Clearance and for facility credentials/authorization to work at this facility.</li></ul>

Additional and Preferred Qualifications:
<ul>
<li>Thorough knowledge of aircraft mechanical component troubleshooting, repair procedures and replacement of parts.</li>
<li>
Broad knowledge of aircraft sheet metal/structural modifications and repair.</li>
<li>
Basic knowledge of electrical theory and a thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, sheet metal brakes and sheers.</li>
<li>
Working knowledge of technical publications and Logistics Information Systems.</li>
<li>
Able to prioritize workloads to maintain schedules on assigned projects and may be required to lead teams through more complex aircraft relevant tasks.</li>
<li>
Participate in maintenance test flights and operation checks as required.</li>
<li>
Possess the level of experience to inspect all required aeronautical type maintenance to be performed by Mechanics.</li>
<li>
The incumbent receives technical guidance, as required, from supervisor or higher-level technician, will occasionally be required to lead teams through more complex aircraft relevant tasks, and may be required to make entries in aircraft logs and records.</li>
</ul>
Physical Requirements/Working Environment
<ul>
<li>Must be able to walk and stand on level and/or inclined surfaces for extended periods throughout the day.</li>
<li>
Must be able to climb stairs, ramps, ladders, and work stands.</li>
<li>
Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee and reach above/below shoulders.</li>
<li>
May be required to lift heavy objects whose weight may exceed 50 pounds.</li>
<li>
Must be able to type using a standard keyboard to communicate through e-mail and various software applications.</li>
<li>
Will handle dirty parts and lubricants.</li>
<li>
Will be required to wear proper Personal Protective Equipment (PPE).</li>
<li>
Must be able to pass a Respirator Physical and Fit Test qualification.</li>
<li>
May be required to operate power vehicles, machinery, hand tools, ground support equipment, forklift, etc.</li>
<li>
Must be able to lift/push/pull minimum of 50 pounds.</li>
<li>
May work in maintenance shop or outside.</li>
<li>
Must be able to work in a shop where the environment is drafty, noisy, and dirty.</li>
<li>
May be exposed to extreme noise from operating equipment.</li>
<li>
May be exposed to electrical shock hazards or work near moving mechanical parts or vehicles.</li>
<li>
May be expected to work in austere environments and all-weather conditions</li></ul></div></div></div></div></div></div></div></div></div> 
Compensation Details:
Not Applicable 
The compensation range or hourly rate listed for this position is provided as a good-faith estimate of what the company intends to offer for this role at the time this posting was issued. Actual compensation may vary based on factors such as job responsibilities, education, experience, skills, internal equity, market data, applicable collective bargaining agreements, and relevant laws. 
Benefits Overview:
Our health and welfare benefits are designed to support you and your priorities. Offerings include:<ul>
<li>
Health, dental, and vision insurance</li>
<li>
Paid time off and holidays</li>
<li>
Retirement benefits (including 401(k) matching)</li>
<li>
Educational reimbursement</li>
<li>
Parental leave</li>
<li>
Employee stock purchase plan</li>
<li>
Tax-saving options</li>
<li>
Disability and life insurance</li>
<li>
Pet insurance</li></ul> 
Note: Benefits may vary based on employment type, location, and applicable agreements. Positions governed by a Collective Bargaining Agreement (CBA), the McNamara-O'Hara Service Contract Act (SCA), or other employment contracts may include different provisions/benefits. 
Original Posting:
02/18/2026 - Until Filled
Amentum anticipates this job requisition will remain open for at least three days, with a closing date no earlier than three days after the original posting. This timeline may change based on business needs. 
Amentum is proud to be an Equal Opportunity Employer. Our hiring practices provide equal opportunity for employment without regard to race, sex, sexual orientation, pregnancy (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, ancestry, United States military or veteran status, color, religion, creed, marital or domestic partner status, medical condition, genetic information, national origin, citizenship status, low-income status, or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state, or local law. Learn more about your rights under Federal laws and supplemental language at Labor Laws Posters.</div>

Aircraft Mechanic II (UH-60) - Buehring, Kuwait

<div>
 
 The UH-60
 
 
 Aircraft Mechanic AM-2 (UH-60 Army Aviation)
 
 performs the full range of military tactical aircraft maintenance and maintains repairs and troubleshoots malfunctions in aircraft structure, landing gear, flight surfaces and controls, anti-icing, pneudraulic, engines, auxiliary power unit, and ventilation and heating systems.
 
 
 <ul>
 <li>
 With a valid (FAA) A&amp;P certificate (Preferred), Two (2) years of aviation maintenance experience, Two (2) years rotary wing aircraft experience, and Two (2) years on the assigned MDS UH-60 aircraft is Required. (See below for requirements without A&amp;P).
 </li>
 <li>
 Valid US Passport and US Citizenship is Required to obtain the NAC-I clearance and for facility access.
 </li>
 <li>
 Remove and install aircraft subsystem assemblies and components such as engines, rotors, transmissions, mechanical flight controls and their components.
 </li>
 <li>
 Safely prepare aircraft for inspections and maintenance checks and services.
 </li>
 <li>
 Perform scheduled inspections and assist in performing special inspections.
 </li>
 <li>
 Perform limited maintenance operational checks and diagnoses and troubleshoots aircraft systems using special tools and test equipment as required.
 </li>
 <li>
 Apply comprehensive technical expertise to solve moderate to complex problems by interpreting technical documentation such as aircraft Technical Manuals, Maintenance Information and Action Messages and all technical guidance provided through government official representatives.
 </li>
 <li>
 Maintain and repair aircraft components including but not limited to flight controls, engines, hydraulics, pneumatics, fuel systems, and mechanical components.
 </li>
 <li>
 Apply technical knowledge of airframe and power plant systems in determining equipment malfunctions and use required expertise in restoring equipment condition and or operation.
 </li>
 <li>
 Participate in maintenance test flights and operation checks as required.
 </li>
 <li>
 Perform other duties as requested.
 
 
 </li>
 </ul>
 
 Minimum Requirements
 
 :
 
 
 <ul>
 <li>
 High School Diploma or Equivalent is required.
 </li>
 <li>
 With a valid (FAA) A&amp;P certificate, Two (2) years of aviation maintenance experience, Two (2) years rotary wing aircraft experience, and Two (2) years on the assigned MDS UH-60 aircraft is Required.
 </li>
 <li>
 All experience must be within the Five (5) most recent years.
 </li>
 <li>
 Without a valid (FAA) A&amp;P certificate; Must have Three (3) years aviation maintenance experience, Three (3) years of rotary wing aircraft experience, and a minimum of Three (3) years on the assigned UH-60 Mission Design Series (MDS) is Required.
 </li>
 <li>
 All experience must be within the Six (6) most recent years.
 </li>
 <li>
 U.S. Military Technical school or specialized training course is desired, certification of education level is required.
 </li>
 <li>
 A Valid US Passport is Required for deployment to Kuwait. The Passport must have 3 years remaining before expiring, and 6 Blank pages available at the time of hire and deployment.
 </li>
 <li>
 Must be able to pass and clear CENTCOM Army MOD Physical and requirements for deployment (will attend CRC/ DIDC Training).
 </li>
 <li>
 Must be able to obtain Kuwait PCC clearance and Visa, prior to deployment.
 
 
 </li>
 </ul>
 
 Security Clearance Requirements:
 
 
 
 <ul>
 <li>
 Must be able to obtain and maintain a US Govt NAC-I (T1) Public Trust Security Clearance. Must be able to obtain and maintain facility credentials/authorization. US Citizenship is required to obtain a Clearance and for facility credentials/authorization to work at this facility.
 
 
 </li>
 </ul>
 
 Additional and Preferred Qualifications
 
 :
 
 
 <ul>
 <li>
 Thorough knowledge of aircraft mechanical component troubleshooting, repair procedures and replacement of parts.
 </li>
 <li>
 Broad knowledge of aircraft sheet metal/structural modifications and repair.
 </li>
 <li>
 Basic knowledge of electrical theory and a thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, sheet metal brakes and sheers.
 </li>
 <li>
 Working knowledge of technical publications and Logistics Information Systems.
 </li>
 <li>
 Able to prioritize workloads to maintain schedules on assigned projects and may be required to lead teams through more complex aircraft relevant tasks.
 </li>
 <li>
 Participate in maintenance test flights and operation checks as required.
 </li>
 <li>
 Possess the level of experience to inspect all required aeronautical type maintenance to be performed by Mechanics.
 </li>
 <li>
 The incumbent receives technical guidance, as required, from supervisor or higher-level technician, will occasionally be required to lead teams through more complex aircraft relevant tasks, and may be required to make entries in aircraft logs and records.
 
 
 </li>
 </ul>
 
 Physical Requirements/Working Environment
 
 
 
 <ul>
 <li>
 Must be able to walk and stand on level and/or inclined surfaces for extended periods throughout the day.
 </li>
 <li>
 Must be able to climb stairs, ramps, ladders, and work stands.
 </li>
 <li>
 Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee and reach above/below shoulders.
 </li>
 <li>
 May be required to lift heavy objects whose weight may exceed 50 pounds.
 </li>
 <li>
 Must be able to type using a standard keyboard to communicate through e-mail and various software applications.
 </li>
 <li>
 Will handle dirty parts and lubricants.
 </li>
 <li>
 Will be required to wear proper Personal Protective Equipment (PPE).
 </li>
 <li>
 Must be able to pass a Respirator Physical and Fit Test qualification.
 </li>
 <li>
 May be required to operate power vehicles, machinery, hand tools, ground support equipment, forklift, etc.
 </li>
 <li>
 Must be able to lift/push/pull minimum of 50 pounds.
 </li>
 <li>
 May work in maintenance shop or outside.
 </li>
 <li>
 Must be able to work in a shop where the environment is drafty, noisy, and dirty.
 </li>
 <li>
 May be exposed to extreme noise from operating equipment.
 </li>
 <li>
 May be exposed to electrical shock hazards or work near moving mechanical parts or vehicles.
 </li>
 <li>
 May be expected to work in austere environments and all-weather conditions
 
 
 </li>
 </ul>
 
 Compensation Details:
 
 
 
 Not Applicable
 
 
 The compensation range or hourly rate listed for this position is provided as a good-faith estimate of what the company intends to offer for this role at the time this posting was issued. Actual compensation may vary based on factors such as job responsibilities, education, experience, skills, internal equity, market data, applicable collective bargaining agreements, and relevant laws.
 
 
 
 Benefits Overview:
 
 
 
 Our health and welfare benefits are designed to support you and your priorities. Offerings include:
 
 
 <ul>
 <li>
 Health, dental, and vision insurance
 </li>
 <li>
 Paid time off and holidays
 </li>
 <li>
 Retirement benefits (including 401(k) matching)
 </li>
 <li>
 Educational reimbursement
 </li>
 <li>
 Parental leave
 </li>
 <li>
 Employee stock purchase plan
 </li>
 <li>
 Tax-saving options
 </li>
 <li>
 Disability and life insurance
 </li>
 <li>
 Pet insurance
 
 
 </li>
 </ul>
 
 Note: Benefits may vary based on employment type, location, and applicable agreements. Positions governed by a Collective Bargaining Agreement (CBA), the McNamara-O'Hara Service Contract Act (SCA), or other employment contracts may include different provisions/benefits.
 
 
 
 
 Original Posting:
 
 
 
 02/18/2026 - Until Filled
 
 
 Amentum anticipates this job requisition will remain open for at least three days, with a closing date no earlier than three days after the original posting. This timeline may change based on business needs.
 
 
 Amentum is proud to be an Equal Opportunity Employer. Our hiring practices provide equal opportunity for employment without regard to race, sex, sexual orientation, pregnancy (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, ancestry, United States military or veteran status, color, religion, creed, marital or domestic partner status, medical condition, genetic information, national origin, citizenship status, low-income status, or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state, or local law. Learn more about your rights under Federal laws and supplemental language at Labor Laws Posters.
</div>

<div>The UH-60 Aircraft Mechanic AM-2 (UH-60 Army Aviation) performs the full range of military tactical aircraft maintenance and maintains repairs and troubleshoots malfunctions in aircraft structure, landing gear, flight surfaces and controls, anti-icing, pneudraulic, engines, auxiliary power unit, and ventilation and heating systems.<div><div><div><div><div><div><div><div><div>
<ul>
<li>With a valid (FAA) A&amp;P certificate (Preferred), Two (2) years of aviation maintenance experience, Two (2) years rotary wing aircraft experience, and Two (2) years on the assigned MDS UH-60 aircraft is Required. (See below for requirements without A&amp;P).</li>
<li>
Valid US Passport and US Citizenship is Required to obtain the NAC-I clearance and for facility access.</li>
<li>
Remove and install aircraft subsystem assemblies and components such as engines, rotors, transmissions, mechanical flight controls and their components.</li>
<li>
Safely prepare aircraft for inspections and maintenance checks and services.</li>
<li>
Perform scheduled inspections and assist in performing special inspections.</li>
<li>
Perform limited maintenance operational checks and diagnoses and troubleshoots aircraft systems using special tools and test equipment as required.</li>
<li>
Apply comprehensive technical expertise to solve moderate to complex problems by interpreting technical documentation such as aircraft Technical Manuals, Maintenance Information and Action Messages and all technical guidance provided through government official representatives.</li>
<li>
Maintain and repair aircraft components including but not limited to flight controls, engines, hydraulics, pneumatics, fuel systems, and mechanical components.</li>
<li>
Apply technical knowledge of airframe and power plant systems in determining equipment malfunctions and use required expertise in restoring equipment condition and or operation.</li>
<li>
Participate in maintenance test flights and operation checks as required.</li>
<li>
Perform other duties as requested.</li>
</ul>
Minimum Requirements:
<ul>
<li>High School Diploma or GED Equivalent is Required.</li>
<li>
A valid (FAA) A&amp;P certificate is preferred, not required.</li>
<li>
With a valid (FAA) A&amp;P certificate, Two (2) years of aviation maintenance experience, Two (2) years rotary wing aircraft experience, and Two (2) years on the assigned UH-60 MDS (Mission Design Series) aircraft is Required.</li>
<li>
All experience must be within the Five (5) most recent years.</li>
<li>
Without a valid (FAA) A&amp;P certificate; Three (3) years aviation maintenance experience, Three (3) years of rotary wing aircraft experience, and a minimum of Three (3) years on the assigned UH-60 (MDS) Mission Design Series is Required.</li>
<li>
All experience must be within the Six (6) most recent years.</li>
<li>
U.S. Military Technical school or specialized training course is desired; certification of education level is required.</li>
<li>
A Valid US Passport is Required for deployment to Kuwait. The Passport must have 3 years remaining before expiring, and 6 Blank pages available at the time of hire and deployment.</li>
<li>
Must be able to pass and clear CENTCOM Army MOD Physical and requirements for deployment (will attend CRC/ DIDC Training).</li>
<li>
Must be able to obtain Kuwait PCC clearance and Visa, prior to deployment.</li>
</ul>
Security Clearance Requirements:
<ul><li>
Must be able to obtain and maintain a US Govt NAC-I (T1) Public Trust Security Clearance. Must be able to obtain and maintain facility credentials/authorization. US Citizenship is Required to obtain a Clearance and for facility credentials/authorization to work at this facility.</li></ul>

Additional and Preferred Qualifications:
<ul>
<li>Thorough knowledge of aircraft mechanical component troubleshooting, repair procedures and replacement of parts.</li>
<li>
Broad knowledge of aircraft sheet metal/structural modifications and repair.</li>
<li>
Basic knowledge of electrical theory and a thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, sheet metal brakes and sheers.</li>
<li>
Working knowledge of technical publications and Logistics Information Systems.</li>
<li>
Able to prioritize workloads to maintain schedules on assigned projects and may be required to lead teams through more complex aircraft relevant tasks.</li>
<li>
Participate in maintenance test flights and operation checks as required.</li>
<li>
Possess the level of experience to inspect all required aeronautical type maintenance to be performed by Mechanics.</li>
<li>
The incumbent receives technical guidance, as required, from supervisor or higher-level technician, will occasionally be required to lead teams through more complex aircraft relevant tasks, and may be required to make entries in aircraft logs and records.</li>
</ul>
Physical Requirements/Working Environment
<ul>
<li>Must be able to walk and stand on level and/or inclined surfaces for extended periods throughout the day.</li>
<li>
Must be able to climb stairs, ramps, ladders, and work stands.</li>
<li>
Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee and reach above/below shoulders.</li>
<li>
May be required to lift heavy objects whose weight may exceed 50 pounds.</li>
<li>
Must be able to type using a standard keyboard to communicate through e-mail and various software applications.</li>
<li>
Will handle dirty parts and lubricants.</li>
<li>
Will be required to wear proper Personal Protective Equipment (PPE).</li>
<li>
Must be able to pass a Respirator Physical and Fit Test qualification.</li>
<li>
May be required to operate power vehicles, machinery, hand tools, ground support equipment, forklift, etc.</li>
<li>
Must be able to lift/push/pull minimum of 50 pounds.</li>
<li>
May work in maintenance shop or outside.</li>
<li>
Must be able to work in a shop where the environment is drafty, noisy, and dirty.</li>
<li>
May be exposed to extreme noise from operating equipment.</li>
<li>
May be exposed to electrical shock hazards or work near moving mechanical parts or vehicles.</li>
<li>
May be expected to work in austere environments and all-weather conditions</li></ul></div></div></div></div></div></div></div></div></div> 
Compensation Details:
Not Applicable 
The compensation range or hourly rate listed for this position is provided as a good-faith estimate of what the company intends to offer for this role at the time this posting was issued. Actual compensation may vary based on factors such as job responsibilities, education, experience, skills, internal equity, market data, applicable collective bargaining agreements, and relevant laws. 
Benefits Overview:
Our health and welfare benefits are designed to support you and your priorities. Offerings include:<ul>
<li>
Health, dental, and vision insurance</li>
<li>
Paid time off and holidays</li>
<li>
Retirement benefits (including 401(k) matching)</li>
<li>
Educational reimbursement</li>
<li>
Parental leave</li>
<li>
Employee stock purchase plan</li>
<li>
Tax-saving options</li>
<li>
Disability and life insurance</li>
<li>
Pet insurance</li></ul> 
Note: Benefits may vary based on employment type, location, and applicable agreements. Positions governed by a Collective Bargaining Agreement (CBA), the McNamara-O'Hara Service Contract Act (SCA), or other employment contracts may include different provisions/benefits. 
Original Posting:
02/24/2026 - Until Filled
Amentum anticipates this job requisition will remain open for at least three days, with a closing date no earlier than three days after the original posting. This timeline may change based on business needs. 
Amentum is proud to be an Equal Opportunity Employer. Our hiring practices provide equal opportunity for employment without regard to race, sex, sexual orientation, pregnancy (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, ancestry, United States military or veteran status, color, religion, creed, marital or domestic partner status, medical condition, genetic information, national origin, citizenship status, low-income status, or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state, or local law. Learn more about your rights under Federal laws and supplemental language at Labor Laws Posters.</div>

UH-60 Aircraft Mechanic AM-2 (UH-60) - Camp Buehring, Kuwait

<div>
 
 The UH-60
 
 
 Aircraft Mechanic AM-2 (UH-60 Army Aviation)
 
 performs the full range of military tactical aircraft maintenance and maintains repairs and troubleshoots malfunctions in aircraft structure, landing gear, flight surfaces and controls, anti-icing, pneudraulic, engines, auxiliary power unit, and ventilation and heating systems.
 
 
 <ul>
 <li>
 With a valid (FAA) A&amp;P certificate (Preferred), Two (2) years of aviation maintenance experience, Two (2) years rotary wing aircraft experience, and Two (2) years on the assigned MDS UH-60 aircraft is Required. (See below for requirements without A&amp;P).
 </li>
 <li>
 Valid US Passport and US Citizenship is Required to obtain the NAC-I clearance and for facility access.
 </li>
 <li>
 Remove and install aircraft subsystem assemblies and components such as engines, rotors, transmissions, mechanical flight controls and their components.
 </li>
 <li>
 Safely prepare aircraft for inspections and maintenance checks and services.
 </li>
 <li>
 Perform scheduled inspections and assist in performing special inspections.
 </li>
 <li>
 Perform limited maintenance operational checks and diagnoses and troubleshoots aircraft systems using special tools and test equipment as required.
 </li>
 <li>
 Apply comprehensive technical expertise to solve moderate to complex problems by interpreting technical documentation such as aircraft Technical Manuals, Maintenance Information and Action Messages and all technical guidance provided through government official representatives.
 </li>
 <li>
 Maintain and repair aircraft components including but not limited to flight controls, engines, hydraulics, pneumatics, fuel systems, and mechanical components.
 </li>
 <li>
 Apply technical knowledge of airframe and power plant systems in determining equipment malfunctions and use required expertise in restoring equipment condition and or operation.
 </li>
 <li>
 Participate in maintenance test flights and operation checks as required.
 </li>
 <li>
 Perform other duties as requested.
 
 
 </li>
 </ul>
 
 Minimum Requirements
 
 :
 
 
 <ul>
 <li>
 High School Diploma or GED Equivalent is Required.
 </li>
 <li>
 A valid (FAA) A&amp;P certificate is preferred, not required.
 </li>
 <li>
 With a valid (FAA) A&amp;P certificate, Two (2) years of aviation maintenance experience, Two (2) years rotary wing aircraft experience, and Two (2) years on the assigned UH-60 MDS (Mission Design Series) aircraft is Required.
 </li>
 <li>
 All experience must be within the Five (5) most recent years.
 </li>
 <li>
 Without a valid (FAA) A&amp;P certificate; Three (3) years aviation maintenance experience, Three (3) years of rotary wing aircraft experience, and a minimum of Three (3) years on the assigned UH-60 (MDS) Mission Design Series is Required.
 </li>
 <li>
 All experience must be within the Six (6) most recent years.
 </li>
 <li>
 U.S. Military Technical school or specialized training course is desired; certification of education level is required.
 </li>
 <li>
 A Valid US Passport is Required for deployment to Kuwait. The Passport must have 3 years remaining before expiring, and 6 Blank pages available at the time of hire and deployment.
 </li>
 <li>
 Must be able to pass and clear CENTCOM Army MOD Physical and requirements for deployment (will attend CRC/ DIDC Training).
 </li>
 <li>
 Must be able to obtain Kuwait PCC clearance and Visa, prior to deployment.
 
 
 </li>
 </ul>
 
 Security Clearance Requirements:
 
 
 
 <ul>
 <li>
 Must be able to obtain and maintain a US Govt NAC-I (T1) Public Trust Security Clearance. Must be able to obtain and maintain facility credentials/authorization. US Citizenship is Required to obtain a Clearance and for facility credentials/authorization to work at this facility.
 
 
 </li>
 </ul>
 
 Additional and Preferred Qualifications
 
 :
 
 
 <ul>
 <li>
 Thorough knowledge of aircraft mechanical component troubleshooting, repair procedures and replacement of parts.
 </li>
 <li>
 Broad knowledge of aircraft sheet metal/structural modifications and repair.
 </li>
 <li>
 Basic knowledge of electrical theory and a thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, sheet metal brakes and sheers.
 </li>
 <li>
 Working knowledge of technical publications and Logistics Information Systems.
 </li>
 <li>
 Able to prioritize workloads to maintain schedules on assigned projects and may be required to lead teams through more complex aircraft relevant tasks.
 </li>
 <li>
 Participate in maintenance test flights and operation checks as required.
 </li>
 <li>
 Possess the level of experience to inspect all required aeronautical type maintenance to be performed by Mechanics.
 </li>
 <li>
 The incumbent receives technical guidance, as required, from supervisor or higher-level technician, will occasionally be required to lead teams through more complex aircraft relevant tasks, and may be required to make entries in aircraft logs and records.
 
 
 </li>
 </ul>
 
 Physical Requirements/Working Environment
 
 
 
 <ul>
 <li>
 Must be able to walk and stand on level and/or inclined surfaces for extended periods throughout the day.
 </li>
 <li>
 Must be able to climb stairs, ramps, ladders, and work stands.
 </li>
 <li>
 Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee and reach above/below shoulders.
 </li>
 <li>
 May be required to lift heavy objects whose weight may exceed 50 pounds.
 </li>
 <li>
 Must be able to type using a standard keyboard to communicate through e-mail and various software applications.
 </li>
 <li>
 Will handle dirty parts and lubricants.
 </li>
 <li>
 Will be required to wear proper Personal Protective Equipment (PPE).
 </li>
 <li>
 Must be able to pass a Respirator Physical and Fit Test qualification.
 </li>
 <li>
 May be required to operate power vehicles, machinery, hand tools, ground support equipment, forklift, etc.
 </li>
 <li>
 Must be able to lift/push/pull minimum of 50 pounds.
 </li>
 <li>
 May work in maintenance shop or outside.
 </li>
 <li>
 Must be able to work in a shop where the environment is drafty, noisy, and dirty.
 </li>
 <li>
 May be exposed to extreme noise from operating equipment.
 </li>
 <li>
 May be exposed to electrical shock hazards or work near moving mechanical parts or vehicles.
 </li>
 <li>
 May be expected to work in austere environments and all-weather conditions
 
 
 </li>
 </ul>
 
 Compensation Details:
 
 
 
 Not Applicable
 
 
 The compensation range or hourly rate listed for this position is provided as a good-faith estimate of what the company intends to offer for this role at the time this posting was issued. Actual compensation may vary based on factors such as job responsibilities, education, experience, skills, internal equity, market data, applicable collective bargaining agreements, and relevant laws.
 
 
 
 Benefits Overview:
 
 
 
 Our health and welfare benefits are designed to support you and your priorities. Offerings include:
 
 
 <ul>
 <li>
 Health, dental, and vision insurance
 </li>
 <li>
 Paid time off and holidays
 </li>
 <li>
 Retirement benefits (including 401(k) matching)
 </li>
 <li>
 Educational reimbursement
 </li>
 <li>
 Parental leave
 </li>
 <li>
 Employee stock purchase plan
 </li>
 <li>
 Tax-saving options
 </li>
 <li>
 Disability and life insurance
 </li>
 <li>
 Pet insurance
 
 
 </li>
 </ul>
 
 Note: Benefits may vary based on employment type, location, and applicable agreements. Positions governed by a Collective Bargaining Agreement (CBA), the McNamara-O'Hara Service Contract Act (SCA), or other employment contracts may include different provisions/benefits.
 
 
 
 
 Original Posting:
 
 
 
 02/24/2026 - Until Filled
 
 
 Amentum anticipates this job requisition will remain open for at least three days, with a closing date no earlier than three days after the original posting. This timeline may change based on business needs.
 
 
 Amentum is proud to be an Equal Opportunity Employer. Our hiring practices provide equal opportunity for employment without regard to race, sex, sexual orientation, pregnancy (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, ancestry, United States military or veteran status, color, religion, creed, marital or domestic partner status, medical condition, genetic information, national origin, citizenship status, low-income status, or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state, or local law. Learn more about your rights under Federal laws and supplemental language at Labor Laws Posters.
</div>

<div>The Army Aviation GSE- Ground Support Equipment Mechanic diagnoses malfunctions and repairs Ground Support Equipment.<div><div><div><div>
<ul>
<li>Three (3) years of Aviation GSE experience in the last Six (6) years. Actual and recent Aviation Related experience in the repair, modification, maintenance and overhaul of related equipment being serviced and their associated components (APU's, etc).</li>
<li>
Inspects and approves completed maintenance actions, solves repair problems by studying drawings, wiring diagrams and schematics, and technical publications.</li>
<li>
Uses automated maintenance data systems to monitor maintenance trends, analyze equipment requirements, maintain equipment records, and document maintenance actions, and analyzes, diagnosis, and repairs GSE using conventional and digital multi-meters, voltmeters, ohmmeters, frequency counters, oscilloscopes, circuit card testers, transistor testers, and hand tools.</li>
<li>
Maintains external fuel and grounding systems.</li>
<li>
Performs scheduled and unscheduled maintenance on GSE - Inspects, tests, and operates GSE to determine equipment serviceability and proper operation.</li>
<li>
Services equipment with fuel, oil, water, coolant, hydraulic fluid, refrigerant, and compressed air.</li>
<li>
Diagnoses mechanical and electronic circuitry malfunctions using visual and auditory senses, test equipment, and technical publications.</li>
<li>
Disassembles and assembles malfunctioning GSE accessories and components.</li>
<li>
Removes, disassembles repairs, cleans, treats for corrosion, assembles, and reinstalls GSE components and accessories, stencils and marks GSE in accordance with technical publications, stores, handles, labels, uses, and disposes of hazardous materials and waste in accordance with all state, local, and federal environmental standards and regulations.</li>
<li>
Prepares GSE for storage and mobility deployment; and operates, cleans, inspects, and services GSE towing vehicles.</li>
<li>
Maintaining vehicle records.</li>
<li>
Maintains and updates paper and electronic equipment records.</li>
<li>
Provides dispatch service for GSE, including positioning equipment to support aircraft maintenance and flying operations.</li>
<li>
Practices good housekeeping, tool control, Foreign Object Damage prevention, and safety at all times.</li>
<li>
Perform other qualified duties as requested.</li>
</ul>
Requirements:
<ul>
<li>High School Diploma or Equivalent</li>
<li>
U.S. Military Technical school or specialized training course is desired.</li>
<li>
Three (3) years of Aviation GSE experience in the last Six (6) years. Actual and recent Aviation Related experience in the repair, modification, maintenance and overhaul of related equipment being serviced and their associated components (APU's, etc).</li>
<li>
Valid U.S. Passport required, and be able to travel internationally with minimum 6 Blank pages and Two (2) plus years' validity on passport expiration date at the time of hiring.</li>
<li>
Must be able to obtain and maintain facility Public Trust NAC-I. Note: US Citizenship is required for facility Public Trust NAC-I at this work location.</li>
<li>
Able to pass CENTCOM Medical requirements for deployment.</li>
<li>
Must be able to Obtain a Kuwait Visa.</li>
</ul>
Knowledge &amp; Skills
<ul>
<li>Knowledge of inspection, servicing, troubleshooting and repair of ground support equipment.</li>
<li>
Knowledge of military publications (including electronic manuals), drawings, blueprints, microfilm, diagrams and schematics is mandatory.</li>
<li>
Knowledge of military and/or company forms required by work assignments.</li>
<li>
Individual must be able to prioritize workloads to maintain schedules on assigned projects and is required to lead teams through more complex aircraft relevant tasks.</li>
<li>
The incumbent receives technical guidance, as required, from supervisor or higher-level technician, will occasionally be required to lead teams through more complex aircraft relevant tasks, and may be required to make entries in aircraft logs and records.</li></ul> 
Physical Requirements
<ul>
<li>Must be able to walk and stand on level and/or inclined surfaces for extended periods throughout the day.</li>
<li>
Must be able to climb stairs, ramps, ladders, and work stands.</li>
<li>
Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee and reach above/below shoulders.</li>
<li>
May be required to lift heavy objects whose weight may exceed 50 pounds.</li>
<li>
Must be able to type using a standard keyboard to communicate through e-mail and various software applications.</li>
<li>
Will handle dirty parts and lubricants.</li>
<li>
Will be required to wear proper Personal Protective Equipment (PPE).</li>
<li>
Must be able to pass a Respirator Physical and Fit Test qualification.</li>
<li>
May be required to operate power vehicles, machinery, hand tools, ground support equipment, fork lift, etc.</li>
<li>
Must be able to lift/push/pull minimum of 50 pounds.</li>
<li>
May work in maintenance shop or outside.</li>
<li>
Must be able to work in a shop where the environment is drafty, noisy, and dirty.</li>
<li>
May be exposed to extreme noise from operating equipment.</li>
<li>
May be exposed to electrical shock hazards or work near moving mechanical parts or vehicles.</li>
<li>
May be expected to work in austere environments and all-weather conditions.</li></ul></div></div></div></div></div>

Ground Support Equipment (GSE) Mechanic - Buehring, Kuwait

Boeing

<div>
 
 Job Description
 
 
 
 At Boeing, we innovate and collaborate to make the world a better place. We&rsquo;re committed to fostering an environment for every teammate that&rsquo;s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.
 
 
 The Boeing Company is currently seeking a
 
 C-17 Product Repair/Mod Technician
 
 to support Boeing Global Services in
 
 Al Mubarak Air Base Kuwait
 
 .
 
 
 This position is part of the on-site C-17 Globemaster III Integrated Sustainment Program maintenance team supporting the Kuwait Air Force (KAF) C-17 aircraft based at Al Mubarak Air Base Kuwait. Applicant will participate in organizational level maintenance activities (e.g. flight line tasks including aircraft servicing, inspections, fault diagnosis and component replacement, and structural repair) associated with day-to-day operations of C-17 Globemaster III aircraft to meet KAF mission requirements.
 
 
 Additionally, participation in Intermediate level maintenance activities (e.g. back-shop tasks including component repair, test set operation, battery charging, and scheduled periodic inspections) will be required.
 
 
 
 Position Responsibilities:
 
 
 
 
 <ul>
 <li>
 English is the primary language of the KAF community on the airbase in Kuwait. All technical data to perform the tasks and training are in English. Competency in reading, comprehension and speaking the English language is necessary.
 </li>
 <li>
 Leads the assembly, disassembly and/or modification of systems by the change, removal, replacement or upgrade of aerospace vehicle components to correct failures or implement changes.
 </li>
 <li>
 Oversee assembly, disassembly or overhaul.
 </li>
 <li>
 Configure aerospace vehicles and bench test equipment.
 </li>
 <li>
 Directs troubleshooting of complex pneumatic, hydraulic, electrical and avionics systems to isolate mechanical or electrical faults and repair faulty components.
 </li>
 <li>
 Oversees validation/verification testing of systems and components.
 </li>
 <li>
 Document procedures and established processes to ensure contractual and regulatory compliance (e.g., repairs, test results, applicable modifications and inspection results).
 </li>
 <li>
 Inspects components and verifies repairs for flight worthiness requirements.
 </li>
 <li>
 Leads and supervises others to perform tasks associated with the safe handling of an aerospace vehicle (e.g. jacking, towing, system operations).
 </li>
 <li>
 Provides training and mentors others.
 </li>
 <li>
 Works under minimal direction.
 
 
 
 </li>
 </ul>
 
 This position requires the ability to obtain a US Security Clearance for which the US Government requires US Citizenship. An interim and/or final U.S. secret clearance Post Start is required.
 
 
 
 
 Basic Qualifications (Required Skills/Experience):
 
 
 
 
 <ul>
 <li>
 5+ years of C17 Maintenance experience, either FCC, flight line or HSC work
 </li>
 <li>
 Ability to obtain a work visa, depending on requirements of the country
 </li>
 <li>
 Ability to meet the cultural requirements of the country, as applicable
 </li>
 <li>
 Must be able to obtain work visa depending on requirements of the country.
 </li>
 <li>
 Candidate must be able to meet the cultural requirements of the country as applicable
 </li>
 <li>
 Ability to recognize and appreciate cultural differences.
 
 
 
 </li>
 </ul>
 
 Preferred Qualifications (Desired Skills/Experience):
 
 
 
 
 <ul>
 <li>
 Experience in avionics systems
 
 
 
 </li>
 </ul>
 
 Typical Education/ Experience:
 
 
 
 Education/experience typically acquired through basic education (e.g. High School diploma/GED) and typically 5 or more years' related work experience or an equivalent combination of education and experience (e.g. vocational school/Associate+2 years' related work, Bachelor, etc.).
 
 
 
 Relocation:
 
 
 
 This position offers relocation based on candidate eligibility
 
 
 Employer is willing to sponsor applicants for employment visa status
 
 
 This requisition is for an international, locally hired position in Kuwait. Benefits and pay are determined at the local level and are not part of Boeing U.S. based payroll and will be commensurate with experience and qualifications and in accordance with applicable Kuwaiti law. Employment is subject to the candidate's ability to satisfy all Kuwiti labor and immigration formalities.
 
 
 
 Drug Free Workplace:
 
 
 
 Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.
 
 
 Applications for this position will be accepted until
 
 Mar. 15, 2026
 
 
 
 
 Export Control Requirements:
 
 
 
 This is not an Export Control position.
 
 
 
 Relocation
 
 
 
 This position offers relocation based on candidate eligibility.
 
 
 
 Security Clearance
 
 
 
 This position requires the ability to obtain a U.S. Security Clearance for which the U.S. Government requires U.S. Citizenship. An interim and/or final U.S. Secret Clearance Post-Start is required.
 
 
 
 Visa Sponsorship
 
 
 
 Employer willing to sponsor applicants for employment visa status.
 
 
 
 Shift
 
 
 
 Shift Worker (Kuwait)
 
 
 
 Equal Opportunity Employer:
 
 
 
 We are an equal opportunity employer. We do not accept unlawful discrimination in our recruitment or employment practices on any grounds including but not limited to; race, color, ethnicity, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military and veteran status, or other characteristics covered by applicable law.
 
 
 We have teams in more than 65 countries, and each person plays a role in helping us become one of the world&rsquo;s most innovative, diverse and inclusive companies. We are proud members of the Valuable 500 and welcome applications from candidates with disabilities. Applicants are encouraged to share with our recruitment team any accommodations required during the recruitment process. Accommodations may include but are not limited to: conducting interviews in accessible locations that accommodate mobility needs, encouraging candidates to bring and use any existing assistive technology such as screen readers and offering flexible interview formats such as virtual or phone interviews.
</div>

C-17 Product Repair & Modifications Technician

Jazeera Airways

<div>Jazeera Airways is looking for a Configuration and Maintenance Program Engineer who would be responsible for continued airworthiness preventive maintenance review in accordance with Jazeera Maintenance Program &amp; reliability data to assure fleet&rsquo;s maximum safety and operating efficiency. The position will also control configurations of Jazeera existing and new aircrafts by performing engineering document reviews to ensure compliance of airworthiness directives/aviation regulation/maintenance program and reflected in Engineering Computer System.

Responsibilities and Duties:
<ul>
<li>Develops and formulates the airframe, engine, propeller, and component maintenance programs to ensure safety, reliability, and airworthiness in the most economical manner.</li>
<li>Reviews and proposes changes to the aircraft maintenance program based on manufacturer recommendations, reliability analysis, and in-service experience, before submitting to the applicable Aviation Authority through the SCM Department.</li>
<li>Optimizes the maintenance program based on fleet performance and task findings, identifying opportunities for increased task effectiveness and efficiency.</li>
<li>Monitors component tracking and interchangeability in the company&rsquo;s system, ensuring compliance with approved manuals and coordinating with Technical Services.</li>
<li>Provides technical assistance to Fleet Management and Aircraft Records, including aircraft entry/exit processes.</li>
<li>Monitors and reviews AD/SB actions that Technical Services intends to implement, ensuring compliance and proper entry into the company&rsquo;s system, and reporting embodiment to OEMs as applicable.</li>
<li>Manages current and historical data for AD/SB compliance based on aircraft configuration.</li>
<li>Defines, builds, and maintains the aircraft configuration tree in the company&rsquo;s system for newly arrived aircraft and landing gears.</li>
<li>Monitors the aging aircraft Corrosion Prevention Control Program (CPCP) and Structural Sampling Inspection Program (SSSIP) to ensure safety and structural integrity.</li>
<li>Performs data entry for components (e.g., AIR, HT) for newly arrived aircraft.</li>
<li>Creates new part numbers and sub-assemblies in the system as needed.</li>
<li>Assists in providing Aircraft Configuration status reports, including AD and Modification status.</li>
<li>Provides technical support for OASES system functionality, addressing configuration concerns, troubleshooting, and offering practical training and guidance.</li>
<li>Maintains OASES history files for technical support and training archives.</li>
<li>Establishes and maintains OASES backup processes in collaboration with Business Units to mitigate issues during system downtime.</li>
<li>Reviews OASES system upgrade releases, validating applicability to Jazeera&rsquo;s processes and coordinating with engineering teams to assess gaps and impacts on Business Units.</li>
<li>Leads OASES process assessments, revisions, and distribution.</li>
<li>Coordinates OASES interface issues with other systems (e.g., AIMS, SAP, Skywise, Conduce), ensuring issues are addressed and monitored by relevant Business Units or system proponents.</li>
<li>Actively participates in Jazeera&rsquo;s SMS, ensuring compliance with safety and security laws and reporting accidents, incidents, and hazards.</li></ul> 
 
Requirements and Qualifications:
<ul>
<li>Degree in Aeronautical/Mechanical Engineering field or equivalent.</li>
<li>Minimum 5 years experience in a similar role.</li>
<li>Maintaining technical knowledge of aircraft type and operational procedures.</li>
<li>Knowledge of EASA Part M, EASA Part 145 and KUWAIT DGCA regulations.</li>
<li>Knowledge in Airline application-based ERP system (OASES, AMOS)</li>
<li>Ability to read and demonstrate knowledge from technical publications.</li>
<li>Advance knowledge of ERP system.</li>
<li>Project Management Skills.</li>
<li>Good interpersonal skills.</li>
<li>Good communication skills and presentation skills.</li>
<li>Proficient in MS Office.</li></ul></div>

Configuration and Maintenance Program Engineer

Explore 190+ Aircraft mechanic ii uh 60 buehring kuwait in Farwaniya this March. Find roles across top companies and apply now to boost your career.

190 aircraft mechanic ii uh 60 buehring kuwait jobs In Farwaniya

Aircraft Mechanic II (UH-60) - Buehring, Kuwait

Aircraft Mechanic II (UH-60) - Buehring, Kuwait

UH-60 Aircraft Mechanic AM-2 (UH-60) - Camp Buehring, Kuwait

UH-60 Aircraft Mechanic AM-2 (UH-60) - Camp Buehring, Kuwait

Ground Support Equipment (GSE) Mechanic - Buehring, Kuwait

C-17 Product Repair & Modifications Technician

Configuration and Maintenance Program Engineer