bi engineer Jobs in Content Creation Social Media Management Jobs In Bahrain

bi engineer

electrical & instrumentation engineer Jobs in Content Creation Social Media Management Jobs In Bahrain

electrical & instrumentation engineer

engineering technician Jobs in Content Creation Social Media Management Jobs In Bahrain

engineering technician

solution engineer Jobs in Content Creation Social Media Management Jobs In Bahrain

solution engineer

civil/structural engineer Jobs in Content Creation Social Media Management Jobs In Bahrain

civil/structural engineer

mechanical engineer

Egis

<div>
 
 Egis is an international player active in architecture, consulting, construction engineering and mobility services. We create and operate intelligent infrastructures and buildings that respond to the climate emergency and contribute to more balanced, sustainable and resilient territorial development. Operating in 100 countries, Egis puts the expertise of its 19,500 employees at the service of its clients and develops cutting-edge innovations accessible to all projects. Through its wide range of activities, Egis is a key player in the collective organisation of society and the living environment of citizens all over the world.
 
 
 
 
 With 3,500 employees across 8 countries in the Middle East, Egis has delivered over 700 complex development projects, stimulating economic growth and enhancing quality of life. Ranked among the top ten firms in the Middle East by Engineering News Record (ENR), Egis is committed to sustainable development. The Group&rsquo;s operations in the Middle East are built on strategic acquisitions and a deep understanding of local market conditions. Egis&rsquo; long history of providing comprehensive engineering, consulting, and project management services makes it a trusted partner for regional governments, investors, and developers.
 
 
 
 
 
 
 Job Description
 
 
 
 
 We are seeking an experienced Mechanical Design Engineer to join our utilities team. The successful candidate will be responsible for designing pump stations and pressurized distribution networks for potable water, firefighting systems, and TSE (treated sewage effluent) systems. The role requires technical leadership across detailed design, hydraulic calculations, equipment selection, specification writing, coordination with multidisciplinary teams, and support through procurement and construction. The ideal candidate has hands-on experience with hydraulic modelling software, pump selection, system commissioning, and local standards for water and fire systems.
 
 
 
 
 
 
 
 <ul>
 <li>
 Lead design of pump stations from concept through detailed design.
 </li>
 <li>
 Design pressurized networks for potable water, firefighting, and TSE systems: layout, sizing, hydraulic zoning, pressure management, and isolation schemes.
 </li>
 <li>
 Perform hydraulic calculations and network analysis (head-loss, flow capacity, pump duty points, system curves, transient/ surge analysis where required).
 </li>
 <li>
 Develop pump selection and pump curve matching; specify motors, drivers (VFDs), control strategies, and instrumentation (pressure/flow/level sensors).
 </li>
 <li>
 Prepare detailed equipment specifications, datasheets, bill of materials, and bid documents for pumps, valves, actuators, hydrants, strainers, and related mechanical equipment.
 </li>
 <li>
 Create and review mechanical drawings (P&amp;IDs, general arrangement, piping and instrumentation, isometrics) and coordinate with civil, electrical, instrumentation, and structural teams.
 </li>
 <li>
 Define and specify piping materials, fittings, supports, expansion joints, cathodic protection and corrosion mitigation strategies.
 </li>
 <li>
 Ensure design compliance with applicable codes, standards and regulations.
 </li>
 <li>
 Evaluate energy efficiency and propose optimization measures (efficient pump selection, VFD control, pressure management, leak reduction).
 </li>
 <li>
 Provide technical support during procurement (tender clarifications, vendor evaluation), factory acceptance tests (FAT), site installation, start-up, commissioning and performance testing.
 </li>
 <li>
 Prepare technical reports, calculation notes, and design deliverables; present design reviews and progress to stakeholders.
 </li>
 <li>
 Identify operational and maintenance considerations; prepare O&amp;M manuals and training materials for operations teams.
 </li>
 <li>
 Participate in risk assessments, value engineering, and QA/QC reviews.
 
 
 
 </li>
 </ul>
 
 Qualifications
 
 
 
 <ul>
 <li>
 Bachelor&rsquo;s degree in Mechanical Engineering. Relevant postgraduate qualifications are advantage.
 </li>
 <li>
 Minimum 10 years of practical design experience in mechanical design of water infrastructure, pump stations and pressurized networks.
 </li>
 <li>
 Proven experience with pump selection and hydraulic design for potable water, fire-fighting and wastewater/TSE systems.
 </li>
 <li>
 Hands-on experience with hydraulic/network modeling software WaterGEMS
 </li>
 <li>
 Required experience in surge/transient analysis for pressurized systems using industry-standard tools (e.g Bentley HAMMER, or comparable software) and interpretation of results to recommend appropriate mitigation.
 </li>
 <li>
 Strong knowledge of design standards and codes.
 </li>
 <li>
 Proficient in CAD (AutoCAD Civil 3D) and familiarity with BIM workflows is preferred.
 </li>
 <li>
 Solid technical writing skills and experience producing design reports and specifications.
 </li>
 <li>
 Good project management skills including time management, prioritization and the ability to work under tight deadlines.
 </li>
 <li>
 Strong communication skills and ability to coordinate with clients, authorities and multidisciplinary teams.
 </li>
 </ul>
</div>

Mechanical Engineer

Omada Rail Systems

<div><ul><li>Permanent Contract
</li></ul><ul><li>Mid-Senior Level
</li></ul><ul><li>Manama
</li></ul><ul><li>Technical Engineering</li></ul></div>
 <div>About Us 
Egis is an international player active in architecture, consulting, construction engineering and mobility services. We create and operate intelligent infrastructures and buildings that respond to the climate emergency and contribute to more balanced, sustainable and resilient territorial development. Operating in 100 countries, Egis puts the expertise of its 19,500 employees at the service of its clients and develops cutting-edge innovations accessible to all projects. Through its wide range of activities, Egis is a key player in the collective organisation of society and the living environment of citizens all over the world.
With 3,500 employees across 8 countries in the Middle East, Egis has delivered over 700 complex development projects, stimulating economic growth and enhancing quality of life. Ranked among the top ten firms in the Middle East by Engineering News Record (ENR), Egis is committed to sustainable development. The Group&rsquo;s operations in the Middle East are built on strategic acquisitions and a deep understanding of local market conditions. Egis&rsquo; long history of providing comprehensive engineering, consulting, and project management services makes it a trusted partner for regional governments, investors, and developers. 
About the Role 
We are seeking an experienced Mechanical Design Engineer to join our utilities team. The successful candidate will be responsible for designing pump stations and pressurized distribution networks for potable water, firefighting systems, and TSE (treated sewage effluent) systems. The role requires technical leadership across detailed design, hydraulic calculations, equipment selection, specification writing, coordination with multidisciplinary teams, and support through procurement and construction. The ideal candidate has hands-on experience with hydraulic modelling software, pump selection, system commissioning, and local standards for water and fire systems. 
<ul><li>
Lead design of pump stations from concept through detailed design.</li><li>
Design pressurized networks for potable water, firefighting, and TSE systems: layout, sizing, hydraulic zoning, pressure management, and isolation schemes.</li><li>
Perform hydraulic calculations and network analysis (head-loss, flow capacity, pump duty points, system curves, transient/ surge analysis where required).</li><li>
Develop pump selection and pump curve matching; specify motors, drivers (VFDs), control strategies, and instrumentation (pressure/flow/level sensors).</li><li>
Prepare detailed equipment specifications, datasheets, bill of materials, and bid documents for pumps, valves, actuators, hydrants, strainers, and related mechanical equipment.</li><li>
Create and review mechanical drawings (P&amp;IDs, general arrangement, piping and instrumentation, isometrics) and coordinate with civil, electrical, instrumentation, and structural teams.</li><li>
Define and specify piping materials, fittings, supports, expansion joints, cathodic protection and corrosion mitigation strategies.</li><li>
Ensure design compliance with applicable codes, standards and regulations.</li><li>
Evaluate energy efficiency and propose optimization measures (efficient pump selection, VFD control, pressure management, leak reduction).</li><li>
Provide technical support during procurement (tender clarifications, vendor evaluation), factory acceptance tests (FAT), site installation, start-up, commissioning and performance testing.</li><li>
Prepare technical reports, calculation notes, and design deliverables; present design reviews and progress to stakeholders.</li><li>
Identify operational and maintenance considerations; prepare O&amp;M manuals and training materials for operations teams.</li><li>
Participate in risk assessments, value engineering, and QA/QC reviews.</li></ul> 
What do we need from you 
<ul><li>
Bachelor&rsquo;s degree in Mechanical Engineering. Relevant postgraduate qualifications are advantage.</li><li>
Minimum 10 years of practical design experience in mechanical design of water infrastructure, pump stations and pressurized networks.</li><li>
Proven experience with pump selection and hydraulic design for potable water, fire-fighting and wastewater/TSE systems.</li><li>
Hands-on experience with hydraulic/network modeling software WaterGEMS</li><li>
Required experience in surge/transient analysis for pressurized systems using industry-standard tools (e.g Bentley HAMMER, or comparable software) and interpretation of results to recommend appropriate mitigation.</li><li>
Strong knowledge of design standards and codes.</li><li>
Proficient in CAD (AutoCAD Civil 3D) and familiarity with BIM workflows is preferred.</li><li>
Solid technical writing skills and experience producing design reports and specifications.</li><li>
Good project management skills including time management, prioritization and the ability to work under tight deadlines.</li><li>
Strong communication skills and ability to coordinate with clients, authorities and multidisciplinary teams.</li></ul></div>

Egis Group

<div>Company Description 
Egis is an international player active in architecture, consulting, construction engineering and mobility services. We create and operate intelligent infrastructures and buildings that respond to the climate emergency and contribute to more balanced, sustainable and resilient territorial development. Operating in 100 countries, Egis puts the expertise of its 19,500 employees at the service of its clients and develops cutting-edge innovations accessible to all projects. Through its wide range of activities, Egis is a key player in the collective organisation of society and the living environment of citizens all over the world.
With 3,500 employees across 8 countries in the Middle East, Egis has delivered over 700 complex development projects, stimulating economic growth and enhancing quality of life. Ranked among the top ten firms in the Middle East by Engineering News Record (ENR), Egis is committed to sustainable development. The Group&rsquo;s operations in the Middle East are built on strategic acquisitions and a deep understanding of local market conditions. Egis&rsquo; long history of providing comprehensive engineering, consulting, and project management services makes it a trusted partner for regional governments, investors, and developers. 
Job Description 
We are seeking an experienced Mechanical Design Engineer to join our utilities team. The successful candidate will be responsible for designing pump stations and pressurized distribution networks for potable water, firefighting systems, and TSE (treated sewage effluent) systems. The role requires technical leadership across detailed design, hydraulic calculations, equipment selection, specification writing, coordination with multidisciplinary teams, and support through procurement and construction. The ideal candidate has hands-on experience with hydraulic modelling software, pump selection, system commissioning, and local standards for water and fire systems. 
<ul><li>
Lead design of pump stations from concept through detailed design.</li><li>
Design pressurized networks for potable water, firefighting, and TSE systems: layout, sizing, hydraulic zoning, pressure management, and isolation schemes.</li><li>
Perform hydraulic calculations and network analysis (head-loss, flow capacity, pump duty points, system curves, transient/ surge analysis where required).</li><li>
Develop pump selection and pump curve matching; specify motors, drivers (VFDs), control strategies, and instrumentation (pressure/flow/level sensors).</li><li>
Prepare detailed equipment specifications, datasheets, bill of materials, and bid documents for pumps, valves, actuators, hydrants, strainers, and related mechanical equipment.</li><li>
Create and review mechanical drawings (P&amp;IDs, general arrangement, piping and instrumentation, isometrics) and coordinate with civil, electrical, instrumentation, and structural teams.</li><li>
Define and specify piping materials, fittings, supports, expansion joints, cathodic protection and corrosion mitigation strategies.</li><li>
Ensure design compliance with applicable codes, standards and regulations.</li><li>
Evaluate energy efficiency and propose optimization measures (efficient pump selection, VFD control, pressure management, leak reduction).</li><li>
Provide technical support during procurement (tender clarifications, vendor evaluation), factory acceptance tests (FAT), site installation, start-up, commissioning and performance testing.</li><li>
Prepare technical reports, calculation notes, and design deliverables; present design reviews and progress to stakeholders.</li><li>
Identify operational and maintenance considerations; prepare O&amp;M manuals and training materials for operations teams.</li><li>
Participate in risk assessments, value engineering, and QA/QC reviews.</li></ul> 

Qualifications 
<ul><li>
Bachelor&rsquo;s degree in Mechanical Engineering. Relevant postgraduate qualifications are advantage.</li><li>
Minimum 10 years of practical design experience in mechanical design of water infrastructure, pump stations and pressurized networks.</li><li>
Proven experience with pump selection and hydraulic design for potable water, fire-fighting and wastewater/TSE systems.</li><li>
Hands-on experience with hydraulic/network modeling software WaterGEMS</li><li>
Required experience in surge/transient analysis for pressurized systems using industry-standard tools (e.g Bentley HAMMER, or comparable software) and interpretation of results to recommend appropriate mitigation.</li><li>
Strong knowledge of design standards and codes.</li><li>
Proficient in CAD (AutoCAD Civil 3D) and familiarity with BIM workflows is preferred.</li><li>
Solid technical writing skills and experience producing design reports and specifications.</li><li>
Good project management skills including time management, prioritization and the ability to work under tight deadlines.</li><li>
Strong communication skills and ability to coordinate with clients, authorities and multidisciplinary teams.</li></ul></div>

Al Manaratain Company & Ali Al Shaab Group W.L.L

<ul><li>Design &amp; Fabrication: Design mechanical systems, tools, and equipment used in concrete product manufacturing, ensuring functionality and durability.</li><li>Welding Process Management: Oversee welding operations (e.g., MIG, TIG, Stick), ensuring high-quality welds and adherence to safety standards.</li><li>Machine Maintenance: Lead maintenance and repair of production machinery, including mixers, conveyors, and molds, ensuring optimal performance.</li><li>Material Selection &amp; Testing: Choose appropriate materials for fabrication and conduct testing to ensure they meet performance standards.</li><li>Quality Control: Inspect fabricated and welded components for accuracy, durability, and compliance with industry standards.</li><li>Process Improvement: Identify opportunities to improve welding, fabrication, and maintenance processes to increase efficiency and reduce downtime.</li><li>Health &amp; Safety Compliance: Ensure all activities follow safety standards, including welding, fabrication, and maintenance tasks.</li></ul>Job Type: Full-timePay: BD350.000 - BD400.000 per monthWork Location: On the road

Pace | Architecture, Engineering + Planning

<div>
 
 The ideal candidate will be responsible for maintaining product and industry knowledge. You will work in a team-oriented environment that accelerates operational efficiency.
 
 
 
 
 
 
 Responsibilities
 
 
 <ul>
 <li>
 Develop, coordinate, and monitor all aspects of the product
 </li>
 <li>
 Suggest methods to improve operational efficiency
 </li>
 <li>
 Work cross-functionally with different teams and organizations
 </li>
 </ul>
 
 
 
 
 
 Qualifications
 
 
 
 
 
 <ul>
 <li>
 Bachelor's degree in Mechanical Engineering or equivalent Ability to read and understand designs and schematics
 </li>
 <li>
 Strong problem solving and critical thinking skills
 </li>
 <li>
 Ability to multi-task, organize, and prioritize work
 </li>
 </ul>
 
 
 
</div>

VINCI Energies

<div>
 Join Comsip Al' A'ali &mdash; Bahrain&rsquo;s trusted leader in electrical and instrumentation engineering
 
 
 
 Comsip Al A'Ali
 
 , a subsidiary of VINCI Energies, delivers
 
 innovative
 
 ,
 
 reliable
 
 , and
 
 customer-focused
 
 solutions that drive industrial and commercial progress across the Kingdom &mdash; all while maintaining the highest standards of safety, quality, and sustainability.
 
 
 
 Our expertise
 
 
 
 We provide
 
 turnkey solutions
 
 across the entire project lifecycle, with deep specialization in:
 
 
 <ul>
 <li>
 Electrical Engineering Services
 </li>
 <li>
 Instrumentation Contracting
 </li>
 <li>
 Medium-Voltage Switchgear &amp; Circuit Protection
 </li>
 <li>
 Industrial &amp; Commercial Sector Projects
 </li>
 <li>
 Technical Construction Services
 </li>
 <li>
 Architectural &amp; Engineering Consultancy
 
 
 </li>
 </ul>
 Backed by the strength of the VINCI Energies network and its brands &mdash;
 
 Actemium
 
 and
 
 Omexom
 
 &mdash; Comsip Al A&rsquo;Ali delivers
 
 agile
 
 ,
 
 locally adapted
 
 , and
 
 high-performance
 
 solutions, embracing a culture of sustainable innovation.
 
 
 If you&rsquo;re passionate about mechanical systems and enjoy working in a fast-paced environment, join us as a Maintenance Mechanical Engineer and help drive operational excellence through proactive maintenance.
 
 
 
 Role &amp; Responsibilities
 
 
 
 Minimum 15 years of mechanical maintenance experience in the oil and gas (onshore/offshore) or refinery or petrochemical chemical Industry.
 
 
 <ul>
 <li>
 Minimum 15 years of mechanical maintenance experience in the oil and gas (onshore/offshore) or refinery or petrochemical chemical Industry.
 </li>
 <li>
 Experience in planning and execution of preventive, predictive, and corrective maintenance, Turnarounds, and shutdowns
 </li>
 <li>
 Hands-on experience with static equipment such as pressure vessels, heat exchangers, pipelines, and storage tanks.
 </li>
 <li>
 Extensive knowledge of rotating equipment, including pumps, compressors, turbines, and gearboxes.
 </li>
 <li>
 Experience conducting and supervising inspections using NDT techniques (e.g., UT, RT, PT).
 </li>
 <li>
 Familiarity with condition-based monitoring techniques (e.g., vibration analysis, thermography, oil analysis).
 </li>
 <li>
 Proficiency in SAP Plant Maintenance (PM) for:
 </li>
 <li>
 Proven ability to manage mechanical maintenance projects, including equipment overhauls and modifications.
 </li>
 <li>
 Experience in reviewing engineering designs and specifications for compliance with standards.
 </li>
 <li>
 Deep understanding of HSE regulations and industry standards (API, ASME, ISO).
 </li>
 <li>
 Experience conducting risk assessments and participating in safety audits and incident investigations.
 </li>
 <li>
 Planning, scheduling, and executing maintenance activities.
 </li>
 <li>
 Managing equipment history and work orders.
 </li>
 <li>
 Analyzing maintenance data to improve reliability and efficiency.
 </li>
 <li>
 Certified Maintenance and Reliability Professional (CMRP) preferred
 
 
 </li>
 </ul>
 
 Qualifications
 
 
 
 <ul>
 <li>
 Bachelors in mechanical engineering or related field.
 
 
 </li>
 </ul>
 
 Why join us?
 
 
 
 
 Our DNA
 
 : Trust, Entrepreneurial Spirit, Solidarity, Autonomy, Responsibility
 
 
 Joining us means becoming part of a large group while enjoying the agility and warmth of a human-sized company!
 
 
 A personalized onboarding journey from day one, with tailored career follow-up
 
 
 Opportunities for growth, training, and mobility within a fast-growing international group
 
 
 Close and supportive management
 
 
 Recognition of employee performance through a company savings plan
 
 
 Pride in shared achievements
 
 
 ☘️ Respect for the environment and local communities in the countries where we operate (Human Rights Guide)
 
 
 Commitment to the health and safety of our employees
 
 
 At VINCI Energies Oil &amp; Gas, CSR initiatives are deeply embedded in our activities, our ways of working, and ultimately, in our DNA
</div>

Maintenance Engineer- Mechanical

Zenith Talent Hub

<div>
 
 Location:
 
 Bahrain
 
 
 
 Industry:
 
 Construction / Roads &amp; Infrastructure
 
 
 
 Employment Type:
 
 Full-Time
 
 
 
 Employer:
 
 Reputed Construction Company
 
 
 
 
 Job Summary
 
 
 
 
 A reputed construction company in Bahrain is hiring experienced professionals for
 
 Road &amp; Infrastructure Projects
 
 . Candidates must have strong technical knowledge, project experience, and proficiency in planning and estimation software.
 
 
 
 Open Positions
 
 🔹
 
 Planning Engineer
 
 (1 Vacancy)
 
 
 
 Salary:
 
 BD
 
 800 &ndash; 1000
 
 + Company Car
 
 
 
 
 Experience Required
 
 
 
 
 <ul>
 <li>
 7&ndash;10 years of experience
 </li>
 <li>
 Experience in Road &amp; Infrastructure projects
 
 
 </li>
 </ul>
 
 
 Qualifications
 
 
 
 
 <ul>
 <li>
 Bachelor&rsquo;s Degree in Mechanical or Civil Engineering
 </li>
 <li>
 Additional Quantity Surveying (QS) qualification preferred
 
 
 </li>
 </ul>
 
 
 Technical Skills
 
 
 
 
 <ul>
 <li>
 Proficiency in Primavera, MS Project, AutoCAD, and MS Office
 </li>
 <li>
 Strong scheduling, planning, and project monitoring skills
 
 
 </li>
 </ul>
 🔹
 
 Quantity Surveyor
 
 (2 Vacancies)
 
 
 
 Salary:
 
 BD
 
 500 &ndash; 600
 
 + Company Car
 
 
 
 
 Experience Required
 
 
 
 
 <ul>
 <li>
 5&ndash;10 years of experience
 </li>
 <li>
 Experience in Road &amp; Infrastructure projects
 
 
 </li>
 </ul>
 
 
 Qualifications
 
 
 
 
 <ul>
 <li>
 Bachelor&rsquo;s Degree in Mechanical or Civil Engineering
 </li>
 <li>
 Quantity Surveying (QS) qualification required
 
 
 </li>
 </ul>
 
 
 Technical Skills
 
 
 
 
 <ul>
 <li>
 Knowledge of MS Project and AutoCAD
 </li>
 <li>
 Experience in BOQ preparation, cost estimation, and billing
 
 
 </li>
 </ul>
 🔹
 
 Senior Estimator
 
 (1 Vacancy)
 
 
 
 Salary:
 
 BD
 
 1400 &ndash; 1500
 
 + Company Car
 
 
 
 
 Experience Required
 
 
 
 
 <ul>
 <li>
 Minimum 10 years of experience
 </li>
 <li>
 Experience in Road &amp; Infrastructure projects
 
 
 </li>
 </ul>
 
 
 Technical Skills
 
 
 
 
 <ul>
 <li>
 Strong knowledge of MS Project and AutoCAD
 </li>
 <li>
 Expertise in cost estimation, tendering, and bid preparation
 
 
 </li>
 </ul>
 
 
 Key Responsibilities (General For All Roles)
 
 
 
 
 <ul>
 <li>
 Review project drawings and specifications.
 </li>
 <li>
 Prepare schedules, estimates, BOQs, and cost analysis.
 </li>
 <li>
 Coordinate with project teams and management.
 </li>
 <li>
 Ensure compliance with project timelines and budgets.
 </li>
 <li>
 Prepare technical and commercial reports.
 
 
 </li>
 </ul>
 
 
 Benefits
 
 
 
 
 <ul>
 <li>
 Competitive salary package (as per role).
 </li>
 <li>
 Company car provided.
 </li>
 <li>
 Other benefits as per Bahrain labor law.
 
 
 </li>
 </ul>
 
 
 How To Apply
 
 
 
 
 Interested candidates may apply with updated CV and relevant experience documents for immediate processing.
 
 
 Skills: project,infrastructure,road,projects,autocad,civil engineering,construction,primavera
</div>

Urgent Hiring – Planning Engineer | Quantity Surveyor | Senior Estimator

Explore 106+ Mechanical engineer in Content Creation Social Media Management Jobs In Bahrain this March. Find roles across top companies and apply now to boost your career.

106 mechanical engineer jobs In Content Creation Social Media Management Jobs In Bahrain

Mechanical Engineer

Mechanical Engineer

Mechanical Engineer

Mechanical Engineer

Mechanical Engineer

Maintenance Engineer- Mechanical

Urgent Hiring – Planning Engineer | Quantity Surveyor | Senior Estimator