electrical engineer

civil site engineer

civil engineer

hvac engineer

planning engineer

mechanical engineer

AL IMAN STEEL BR 1 LLC

We urgently looking for 2 numbers of a Tekla Modeler develops detailed 3D structural models and fabrication drawings using Tekla Structures software. With minimum of 3 yrs experienced. They collaborate with engineers and architects to translate design plans into constructible elements, ensuring compliance with industry standards while proactively performing clash detection.Key Responsibilities:3D Modeling: Create highly detailed, accurate structural steel and/or concrete models including connections, stairs, and handrails.Drawing Production: Generate General Arrangement (GA), shop, assembly, and erection drawings.Coordination &amp; Clash Detection: Integrate models with architectural or Civil engineer disciplines to resolve clashes and prevent construction delays.Qualifications &amp; SkillsEducation: Diploma or Bachelor&rsquo;s degree in Civil Engineering, Mechanical Engineering, or Architecture.Technical Software: Proficiency in Tekla Structures (XSteel), AutoCAD, and Excel.Experience: Typically 2 to 5+ years of hands-on experience in structural detailing and steel fabrication drawings.Pay: From AED4,000.00 per monthWork Location: In person

TEKLA MODELER

360 HR Partners FZ LLC

Job Description: Civil Maintenance Engineer &ndash; Combined Cycle Power PlantDue to the Nature of Requirement: Only candidates that possess experience from Power Plants will be considered for this role.Position OverviewThe Civil Maintenance Engineer is responsible for maintaining the structural integrity, reliability, and safety of all civil and structural assets in a Combined Cycle Power Plant (CCPP). This includes routine inspections, preventive and corrective maintenance, repair planning, and coordination with operations and mechanical/electrical teams to ensure continuous and efficient plant performance.Key Responsibilities1. Structural Inspection &amp; Condition Monitoring<ul><li>Conduct routine inspections of gas turbine (GT), steam turbine (ST), and HRSG foundations</li><li>Monitor vibration‑related structural issues around GT/ST/HRSG areas</li><li>Inspect cooling towers, ACC structures, pipe racks, chimneys, tanks, and auxiliary buildings</li><li>Perform NDT tests (rebound hammer, UPV, core tests, rebar scanning)</li><li>Identify deterioration such as cracks, spalling, corrosion, settlement, and thermal damage</li><li>Prepare condition assessment reports with repair recommendations</li></ul>2. Civil Maintenance &amp; Repair Works<ul><li>Execute concrete repair works (epoxy injection, jacketing, grouting, patching)</li><li>Maintain steel structures exposed to heat, vibration, and corrosion</li><li>Oversee painting and coating systems for structures in high‑temperature zones</li><li>Maintain drainage systems, stormwater channels, culverts, and plant roads</li><li>Repair and maintain cooling water structures, sumps, trenches, and chemical containment areas</li><li>Support repairs of GT/ST/HRSG foundations, anchor bolts, and embedded plates</li></ul>3. Outage &amp; Shutdown Support<ul><li>Prepare civil maintenance scope for GT, ST, and HRSG outages</li><li>Coordinate with mechanical teams during major overhauls (CI, HGPI, MI)</li><li>Ensure safe access (scaffolding, platforms) for HRSG inspections</li><li>Develop method statements, risk assessments, and work permits</li><li>Prioritize critical civil tasks to align with outage windows</li></ul>4. Contractor &amp; Site Management<ul><li>Supervise civil maintenance contractors and ensure compliance with plant standards</li><li>Verify material quality, workmanship, and adherence to specifications</li><li>Review contractor BOQs, technical submittals, and invoices</li><li>Ensure safe execution of works in live plant areas</li></ul>5. Documentation &amp; Asset Management<ul><li>Maintain inspection logs, repair history, and as‑built documentation</li><li>Use CMMS (SAP PM, Maximo, Oracle EAM) for work orders and preventive maintenance</li><li>Prepare technical reports, repair proposals, and cost estimates</li><li>Update civil drawings and asset condition records</li></ul>6. Compliance &amp; Safety<ul><li>Ensure compliance with plant safety procedures (LOTO, confined space, hot work)</li><li>Implement environmental controls during repair activities</li><li>Participate in safety audits, toolbox talks, and emergency response drills</li><li>Ensure safe access around HRSG, GT, and ST areas during maintenance</li></ul>Required Technical Skills<ul><li>Structural inspection and NDT techniques</li><li>Concrete and steel repair methodologies</li><li>Knowledge of ACI, AISC, ASTM, and coating standards (SSPC/NACE)</li><li>Familiarity with CCPP systems: GT, ST, HRSG, ACC/cooling towers, BOP structures</li><li>Proficiency in AutoCAD, STAAD.Pro (for structural checks), and CMMS tools</li><li>Understanding of drainage, water systems, and industrial infrastructure</li></ul>Qualifications<ul><li>Bachelor&rsquo;s degree in Civil Engineering</li><li>3&ndash;10 years of civil maintenance experience in CCPPs, thermal plants, refineries, or heavy industry</li><li>Experience with vibration‑sensitive structures and high‑temperature zones</li><li>Certifications in NDT, coating inspection, or safety (advantageous)</li></ul>Key Competencies<ul><li>Strong diagnostic and problem‑solving skills</li><li>Ability to work safely in live plant environments</li><li>Effective communication and contractor management</li><li>High attention to detail and strong safety mindset</li></ul>Pay: AED9,000.00 - AED12,000.00 per monthWork Location: In person

Civil Maintenance Engineer

POWERLINE SOLUTIONS

PLC/SCADA Automation Engineer &ndash; Water Treatment &amp; Injection Package SystemsJob SummaryWe are seeking an experienced PLC/SCADA Automation Engineer with strong expertise in developing PLC logic, HMI/SCADA applications, and commissioning automation systems for water treatment plants and chemical/water injection package systems. The successful candidate will be responsible for writing, testing, troubleshooting, and commissioning PLC software for packaged process plants while ensuring reliable and efficient plant operation.Key Responsibilities<ul><li>Develop PLC software and control logic using Ladder Logic, Function Block Diagram (FBD), Structured Text (ST), and Sequential Function Charts (SFC) in accordance with IEC 61131-3 standards.</li><li>Design, develop, and maintain HMI and SCADA applications with process graphics, alarms, trends, event logs, reports, and user management.</li><li>Prepare functional design specifications (FDS), software design specifications (SDS), I/O lists, control narratives, cause-and-effect matrices, alarm lists, and software documentation.</li><li>Develop automation software for:</li><li>Water Treatment Plants (WTP)</li><li>Reverse Osmosis (RO) Plants</li><li>Ultrafiltration (UF) Systems</li><li>Demineralized (DM) Water Plants</li><li>Chemical Dosing and Injection Packages</li><li>Water Injection Skids</li><li>Pumping Stations</li><li>CIP Systems</li><li>Containerized and Skid-Mounted Water Treatment Systems</li><li>Develop PLC sequencing for automatic plant start-up, shutdown, flushing, backwashing, chemical dosing, tank level management, pump duty/standby changeover, and plant protection interlocks.</li><li>Configure and troubleshoot communication with PLCs, remote I/O, variable frequency drives (VFDs), motor control centres (MCCs), analyzers, and field instrumentation.</li><li>Integrate field devices including flow, pressure, level, temperature, pH, ORP, conductivity, turbidity, chlorine analyzers, dosing pumps, control valves, actuators, and package equipment.</li><li>Configure industrial communication protocols such as Modbus RTU/TCP, Profinet, Profibus, Ethernet/IP, and OPC UA.</li><li>Perform software simulation, Factory Acceptance Testing (FAT), Site Acceptance Testing (SAT), loop checking, commissioning, and plant start-up.</li><li>Troubleshoot PLC programs, SCADA systems, HMI applications, communication networks, and field instrumentation during commissioning and operation.</li><li>Optimize control logic to improve plant performance, reliability, chemical consumption, and energy efficiency.</li><li>Prepare software backups, as-built documentation, and operating manuals.</li><li>Provide technical support, operator training, and after-sales troubleshooting.</li><li>Coordinate with process, electrical, instrumentation, mechanical, and commissioning engineers throughout project execution.</li></ul>Required Qualifications<ul><li>Bachelor's Degree or Diploma in Electrical, Electronics, Instrumentation, Automation, or Mechatronics Engineering.</li><li>Minimum 5 years of experience in PLC/SCADA programming for water treatment plants, RO systems, or chemical/water injection package systems.</li><li>Proven experience in writing PLC logic from scratch for packaged process plants.</li></ul>Technical Skills<ul><li>Strong PLC programming skills using Ladder Logic, FBD, Structured Text, and Sequential Function Charts.</li><li>HMI and SCADA development experience.</li><li>Strong understanding of process control, instrumentation, interlocks, alarms, and sequencing.</li><li>Experience in industrial networking and communication protocols.</li><li>Ability to read P&amp;IDs, electrical drawings, loop diagrams, and control philosophies.</li><li>Experience with VFDs, MCCs, soft starters, analyzers, and intelligent field devices.</li></ul>Preferred PLC Platforms<ul><li>Siemens TIA Portal (S7-1200/S7-1500)</li><li>Allen-Bradley ControlLogix and CompactLogix</li><li>Schneider Electric EcoStruxure Control Expert</li><li>Mitsubishi</li><li>Omron</li><li>ABB</li><li>Beckhoff</li><li>Delta</li></ul>Preferred SCADA/HMI Platforms<ul><li>Siemens WinCC</li><li>AVEVA/Wonderware InTouch System Platform</li><li>Ignition</li><li>FactoryTalk View</li><li>Citect SCADA</li><li>Schneider EcoStruxure HMI</li></ul>Preferred Experience<ul><li>Water treatment and desalination package systems.</li><li>Reverse Osmosis and Ultrafiltration plants.</li><li>Chemical dosing and injection skids.</li><li>Packaged process equipment.</li><li>FAT, SAT, commissioning, and field troubleshooting.</li><li>Remote monitoring, telemetry, and industrial IoT integration.</li></ul>Personal Attributes<ul><li>Strong analytical and troubleshooting skills.</li><li>Ability to work independently and manage multiple projects.</li><li>Good communication and documentation skills.</li><li>Willingness to travel for site commissioning and customer support.</li><li>Commitment to delivering high-quality automation solutions within project schedules.</li></ul>Pay: AED2,505.35 - AED9,528.47 per monthWork Location: In person

Automation Engineer

Air Arabia

<div>
 
 Job Purpose
 
 
 
 
 Fleet Technical Management
 
 
 
 Fulfil experience over a 2 year period in assigned areas and demonstrate knowledge and experience suitable for Engineer role.
 
 
 To encompass multiple areas of learning to include AMP, Systems, Reliability, Warranty, Propulsion, APU, short/long term maintenance, Technical Records, Technical Library, logistics, rotable management and special projects
 
 
 The individual will learn how to evaluate and manage AD&rsquo;s and SB and how to translate this knowledge into business control measures for the airline.
 
 
 
 Base and/or Line Maintenance
 
 
 
 Fulfil experience over a 2 year period in assigned areas whilst obtaining knowledge and experience to gain Basic License suitable for Engineer role.
 
 
 To encompass multiple areas of learning to carry out and supervise Base and/or Line maintenance tasks on Air Arabia and third party aircrafts within the applicable &amp; relevant License Category, ensuring the required work is performed, certified and recorded accurately and timely in accordance with Air Arabia and regulatory requirements.
 
 
 
 Key Result Responsibilities
 
 
 
 
 Fleet Technical Management
 
 
 
 On day-to-day basis to support the engineering development engineers or other CAMO staff in providing support to maintenance (Line, Hangar, MCC, other CAMO department), this would include, performance review, analysis of requests, management reporting, corrective measures, and necessary modifications.
 
 
 Carries out a programme of training as agreed with the Air Arabia Training Manager and/ or Line Manager.
 
 
 Utilizes data gathered from different sources to conduct, under supervision, technical root-cause analysis and troubleshooting and to decide on aircrafts efficiency and maintenance needs.
 
 
 Analyzes data and technical performance reports, under supervision, to identify trends, highlight findings and suggest solutions and proactive modifications.
 
 
 Identifies corrective measures and modifications, under supervision, to fix any damages or airworthiness findings, recommends AMP inclusions/exclusions along with justification and supporting evidences, as and when required.
 
 
 Reviews technical document, under supervision, as per TPM section 5, for implementation of modifications/repairs subject to CAMO management acceptance.
 
 
 Carries out training with other areas of the CAMO engineering environment such as Projects, Warranty, etc.
 
 
 Assists in the closure of occurrence reports under supervision.
 
 
 Participates in function related meetings/conferences and events both internally and externally.
 
 
 Continues to engage in personal development undertaking such trainings as deemed required by the Training Manager and or Line Manager
 
 
 Performs any other duties as advised by the direct supervisor.
 
 
 Key Result Responsibilities - Continued
 
 
 
 Maintenance
 
 
 
 Reviews assigned maintenance work with the Shift Manager to gain full understanding of tasks, their relative priorities, documentation reAquirements and cautions, prior to starting work.
 
 
 Under guidance, Prepares and performs scheduled aircraft maintenance according to assigned task cards, ensuring that the required documentation, parts, tools and GSE are obtained and used per issued instructions.
 
 
 Under guidance, carries out aircraft test and inspection tasks to the standard necessary to fully identify and record any defects or damage in accordance with approved maintenance procedures.
 
 
 Under guidance, performs defect troubleshooting and rectification in accordance with Aircraft Maintenance Manuals and instructions provided by Engineering Department.
 
 
 Manages communications with other Engineers and Technicians related to the assigned tasks, ensuring proper coordination, continuity and handover of work.
 
 
 By proper work planning, decision making and communications, ensures that maintenance tasks are carried out whenever possible within the planned ground time to avoid operational delay.
 
 
 Manages the safety of assigned maintenance tasks, ensuring all published mandatory precautions are taken prior to commencing work and during task execution.
 
 
 Takes positive steps to protect self and other persons in the area of the maintenance activity from any possible injury, including the use of proper GSE and protective equipment.
 
 
 Manages human factors aspects of maintenance, ensuring that the continuity of critical maintenance tasks is protected, by avoidance of task interruption and the proper use of handover procedures.
 
 
 Internal Customer Service: provides positive support to other operational teams in ABY, provides proactive and helpful professional advice, suggestions and solutions.
 
 
 Representing Air Arabia: presents a positive and competent image of technical professionalism to ABY Flight Crews, other companies&rsquo; personnel and ABY customers.
 
 
 Maintains positive awareness to the cost of aircraft maintenance including use of time and materials. Minimises unnecessary waste of consumable material and part repair cost by avoiding unnecessary damage and repeat work during maintenance.
 
 
 
 Qualifications (Academic, Training, Languages)
 
 
 
 <ul>
 <li>
 A degree in Aircraft Engineering/ Electro-Mechanical/Aeronautical or equivalent (LAE); alternately a higher diploma or certificate in the related field from a recognized university or engineering college combined with needed experience and exposure.
 </li>
 <li>
 Capable of using technology systems &amp; tools; proficient in Microsoft office, MRO systems and Web Search.
 </li>
 <li>
 Very good written and verbal communication skills: reporting, presentations, etc.
 </li>
 <li>
 Very good in English Language
 
 
 </li>
 </ul>
 
 Work Experience
 
 
 
 <ul>
 <li>
 2-5 years in a university with a specialisation in Aviation.
 </li>
 <li>
 A balanced personality with focus and commitment to achieve successful results.
 </li>
 <li>
 Good Theoretical knowledge of relevant areas of Aircraft Engineering, supported with some practical experience.
 </li>
 <li>
 Engaged and motivated to learn
 </li>
 <li>
 High accuracy and attention to both results and details.
 </li>
 <li>
 Proven skills in analyzing data, identifying irregularities and suggesting solutions.
 </li>
 <li>
 Cost-oriented, possesses good problem-solving skills.
 </li>
 <li>
 Employs knowledge and interpersonal relations to support company&rsquo;s objectives.
 </li>
 </ul>
</div>

Graduate Engineer Trainee

Hateen Tech Cont

Job Summary: Responsible for preparing detailed MEP (Mechanical, Electrical, and Plumbing) drawings using AutoCAD and Revit based on project requirements, consultant comments, and engineering standards.Key Responsibilities:<ul><li>Prepare MEP shop drawings and coordination drawings.</li><li>Develop HVAC, plumbing, firefighting, and electrical layouts.</li><li>Prepare as-built drawings after project completion.</li><li>Coordinate with site engineers, consultants, and project managers.</li><li>Revise drawings according to site conditions and consultant comments.</li><li>Ensure drawings comply with local authority and project standards.</li><li>Maintain drawing records and revisions.</li><li>Assist in quantity take-offs when required.</li></ul>Requirements:<ul><li>Diploma or Bachelor's degree in Mechanical, Electrical, or Civil Engineering.</li><li>2&ndash;5+ years of experience as an MEP Draughtsman.</li><li>Proficiency in AutoCAD (mandatory).</li><li>Knowledge of Revit MEP is an advantage.</li><li>Understanding of HVAC, Plumbing, Fire Fighting, and Electrical systems.</li><li>Ability to read construction drawings and specifications.</li><li>Good communication and teamwork skills.</li></ul>Software Skills:<ul><li>AutoCAD(preferred)</li><li>MS Office(preferred)</li></ul>Job Types: Full-time, PermanentWork Location: In person

MEP Draftsman

LUCKY FABRICATORS STEEL CONSTRUCTION FZE LLC

Job SummaryWe are seeking an experienced Commercial Estimation Engineer to prepare accurate cost estimates, tender submissions, commercial proposals, and bid documentation for construction and engineering projects. The successful candidate will coordinate with engineering, procurement, project management, and commercial teams to ensure competitive pricing, technical compliance, and successful project bidding while maximizing profitability.Key ResponsibilitiesEstimation &amp; Costing<ul><li>Prepare accurate cost estimates based on drawings, specifications, BOQs, and tender documents.</li><li>Review project requirements, scope of work, and technical specifications.</li><li>Perform quantity take-offs from IFC drawings, shop drawings, and tender documents.</li><li>Calculate material, labor, equipment, subcontractor, and overhead costs.</li><li>Develop detailed cost breakdowns and estimate summaries.</li><li>Maintain cost databases and historical pricing records.</li><li>Evaluate project risks and include appropriate contingencies in estimates.</li></ul>Tender &amp; Proposal Management<ul><li>Review tender invitations, RFQs, and RFPs.</li><li>Prepare technical and commercial bid proposals.</li><li>Coordinate complete tender submissions within deadlines.</li><li>Ensure compliance with client requirements and tender specifications.</li><li>Prepare bid clarifications and respond to client queries.</li><li>Participate in tender opening, negotiations, and post-bid discussions.</li><li>Support contract award and project handover processes.</li></ul>Commercial Evaluation<ul><li>Analyze project profitability and commercial viability.</li><li>Evaluate subcontractor and supplier quotations.</li><li>Compare quotations to ensure the best commercial value.</li><li>Prepare bid comparison statements and commercial evaluations.</li><li>Identify cost-saving opportunities and value engineering options.</li><li>Assist in pricing variations and change orders.</li><li>Support commercial negotiations with clients and suppliers.</li></ul>Coordination<ul><li>Coordinate with Engineering, Procurement, Project Management, Planning, and QA/QC teams.</li><li>Liaise with suppliers and subcontractors for quotations and technical information.</li><li>Coordinate with clients and consultants regarding commercial clarifications.</li><li>Ensure engineering deliverables are aligned with commercial proposals.</li><li>Support smooth project handover to the execution team.</li></ul>Procurement Support<ul><li>Obtain and evaluate supplier quotations.</li><li>Coordinate material pricing and procurement schedules.</li><li>Monitor market price fluctuations for construction materials.</li><li>Build and maintain supplier and subcontractor databases.</li><li>Recommend approved suppliers and vendors.</li></ul>Cost Control &amp; Value Engineering<ul><li>Recommend alternative materials and construction methods to reduce costs.</li><li>Support value engineering initiatives without compromising quality.</li><li>Monitor estimated costs against project budgets.</li><li>Assist in forecasting project costs and commercial risks.</li><li>Support budget preparation for new projects.</li></ul>Documentation &amp; Reporting<ul><li>Prepare estimation reports and commercial summaries.</li><li>Maintain tender registers and bid tracking records.</li><li>Prepare quantity take-off sheets and costing spreadsheets.</li><li>Maintain documentation for all submitted bids.</li><li>Prepare management reports on tender status and success rates.</li><li>Ensure proper filing of commercial documents.</li></ul>Contract &amp; Commercial Support<ul><li>Review contract conditions and commercial terms.</li><li>Identify commercial risks and contractual obligations.</li><li>Support preparation of variation orders and claims.</li><li>Assist with payment applications and project valuations.</li><li>Coordinate with the commercial team throughout the project lifecycle.</li></ul>Quality &amp; Compliance<ul><li>Ensure estimates comply with project specifications and company standards.</li><li>Verify compliance with client requirements and tender conditions.</li><li>Follow company commercial procedures and documentation standards.</li><li>Maintain confidentiality of commercial information.</li></ul>General Responsibilities<ul><li>Stay updated on market trends, material prices, and industry standards.</li><li>Support continuous improvement of estimation processes.</li><li>Build strong relationships with clients, consultants, suppliers, and subcontractors.</li><li>Perform any other duties assigned by the Commercial Manager or Management.</li></ul>RequirementsEducation<ul><li>Bachelor's Degree in Civil Engineering, Mechanical Engineering, Quantity Surveying, Construction Management, or a related discipline.</li></ul>Experience<ul><li>3&ndash;8 years of experience in commercial estimation, tendering, or quantity surveying.</li><li>UAE/GCC experience is preferred.</li><li>Experience in structural steel, steel fabrication, PEB, oil &amp; gas, industrial, commercial, fit-out, fa&ccedil;ade, EPC, or infrastructure projects is an advantage.</li></ul>Technical Skills<ul><li>Strong knowledge of quantity take-offs, cost estimation, and tender preparation.</li><li>Ability to read IFC drawings, shop drawings, BOQs, and technical specifications.</li><li>Proficiency in Microsoft Excel, Word, and PowerPoint.</li><li>Familiarity with AutoCAD and ERP systems is an advantage.</li><li>Knowledge of procurement processes and commercial evaluations.</li><li>Understanding of FIDIC contracts and construction contract administration is preferred.</li></ul>Core Competencies<ul><li>Strong analytical and commercial thinking.</li><li>Excellent numerical and cost analysis skills.</li><li>Attention to detail and accuracy.</li><li>Excellent communication and negotiation skills.</li><li>Strong planning and organizational abilities.</li><li>Ability to manage multiple tenders simultaneously.</li><li>Problem-solving and decision-making skills.</li><li>Ability to work under pressure and meet tender deadlines.</li><li>Professional report writing and documentation skills.</li></ul>Preferred Industry Experience<ul><li>Structural Steel Fabrication</li><li>Pre-Engineered Buildings (PEB)</li><li>Oil &amp; Gas</li><li>Industrial Construction</li><li>Commercial Construction</li><li>Infrastructure Projects</li><li>EPC Projects</li><li>Interior Fit-Out</li><li>Fa&ccedil;ade &amp; Aluminium</li><li>Heavy Engineering &amp; Manufacturing</li></ul>Work Location: In person

Commercial Estimation Engineer

AL ARABI ALUMINIUM AND ROLLING SHUTTER MFG LLC

Role OverviewThe Automation Technician Helper supports senior technicians in installing, maintaining, and repairing automated entrance systems, including sliding doors, swing doors, sectional doors, Automatic Gate and Barriers. This role is ideal for candidates eager to build technical skills in a fast‑growing automation environment.Key Responsibilities<ul><li>Assist in installation of automatic sliding, swing, Automatic gate, Barriers and sectional door systems.</li><li>Support troubleshooting and basic repairs under technician supervision.</li><li>Perform routine maintenance, cleaning, and lubrication of mechanical components.</li><li>Help with wiring, sensor alignment, and controller setup.</li><li>Maintain tools, equipment, and worksite safety standards.</li><li>Coordinate with the technical team for material preparation and job scheduling.</li><li>Provide on‑site support during testing and commissioning.</li></ul>Required Skills &amp; Qualifications<ul><li>Basic knowledge of electrical or mechanical systems.</li><li>Ability to use hand tools and power tools safely.</li><li>Willingness to learn automation technologies and control systems.</li><li>Good communication and teamwork skills.</li><li>Physically fit and able to work at heights when required.</li><li>Previous experience in doors, barriers, or automation.</li></ul>Salary &amp; Benefits<ul><li>Competitive salary based on experience.</li><li>Overtime benefits.</li><li>Company‑provided training on automation systems.</li><li>Career growth opportunities within the Technical Department.</li></ul>How to ApplyInterested candidates may submit their CV to sales4@agbme.com with the subject line &ldquo;Application &ndash; Automation Technician Helper&rdquo;Work Location: In person

Automation Technician Helper

Explore 14+ Mechanical engineer in Sharjah this August. Find roles across top companies and apply now to boost your career.