substation engineer

NATIONAL ELECTRICITY & WATER CONSTRUCTIONS WLL

Core Responsibilities:<ul><li>Prepare switching program for required tasks and alteration forms when applicable</li><li>Submit the switching program and the alteration form to distribution control centar for</li></ul>approval<ul><li>Perform the isolations / restorations required for circuits / equipment according to switching</li></ul>program with the consent of control engineer<ul><li>Restore all Supply after completion.</li><li>Reporting all types of system abnormalities.</li><li>Fill up all required site forms for substation, transformers, switchgear and FP / MV panel.</li><li>Feeder Pillar works like ......earth, broken parts, phase missing any sparks,</li><li>Carry out the operations in the distribution system to isolate and restore required equipment</li></ul>or circuit with the consent of control engineer<ul><li>Carry out the operations in the distribution system to shift Normal Open Points (NOP) to</li></ul>respect set standards as advised by DCC<ul><li>Writes shutdown notice for affected customer&rsquo;s outages when applicable.</li><li>Keep records of data for reference, management information and analysis purposes.</li><li>Maintain &amp; Update Schematic Diagram as per site condition when applicable.</li><li>Has a daily contact with the Distribution Control Center (DCC), to exchange information and</li></ul>for work coordination<ul><li>Supervises all activities related to commissioning of new 11 KV substation in order to ensure</li></ul>adherence to guidelines and procedures<ul><li>Supervises the commissioning of underground 11 KV cables, overhead lines and</li></ul>switchgears to ensure optimal performance of equipment<ul><li>Supervises and provide inputs on technical issues such as change in transformer and feeder</li></ul>pillars, management of Ring Main Unit (RMU), panels, Tx switches, etc.<ul><li>Coordinates with Contractors to ensure all operations and activities adhere to KAHRAMAA quality guidelines</li><li>&bull; Works in cooperation with KAHRAMAA Quality Assurance and Continual Improvement</li><li>department on securing and maintaining the quality of works on site.</li><li>&bull; Carries out and ensures that all activities under his responsibility, within the Construction</li><li>Section, are in line with KAHRAMAA health and safety regulations.</li><li>People Management Responsibilites:</li><li>&bull; Defines and agree performance goals (KRA) at the start of the year in discussion with the</li><li>Project Coordinator and ensures that the goals are achieved during the course of the year</li><li>&bull; Identifies the training and development requirements for self and agrees on them with the</li><li>Project Coordinator to ensure that the required trainings are arranged and attended</li><li>&bull; Keeps abreast of professional developments,</li></ul><ul><li>Bachelor&rsquo;s degree or equivalent in Electrical Engineering</li></ul><ul><li>Minimum 5 years of relevant experience in a similar industry or in a similar role of which</li></ul>minimum 3+ years of supervisory and switching &amp; operation experience preferably in Power Distribution System.<ul><li>In line with International business etiquette and standards</li></ul><ul><li>Good knowledge of the relevant KAHRAMAA specifications and International Standards in</li></ul>Electrical Distribution works as well as relevant safety regulation applicable for DistributionSystem.Written and Spoken English is essential, Arabic is preferredJob Type: Full-time

Electrical Engineer (Switching & Operation)

Vrinda Global

<div>
 
 
 Position: Project Engineering Manager &ndash; Civil &amp; Structural (Substations)
 
 
 
 
 Experience:
 
 17+ Years
 
 
 
 Location
 
 - UAE &amp; Qatar
 
 
 
 Qualification:
 
 B.Tech/M.Tech &ndash; Civil / Structural Engineering (or related)
 
 
 
 Role Overview:
 
 
 
 Lead civil and structural engineering activities for
 
 high-voltage substation projects
 
 , ensuring safe, optimized, and timely design delivery across project phases&mdash;from pre-bid to as-built documentation.
 
 
 
 
 
 
 Key Responsibilities:
 
 
 <ul>
 <li>
 Manage end-to-end civil &amp; structural engineering for substation projects (11kV&ndash;765kV)
 </li>
 <li>
 Lead and coordinate design teams to meet schedule, quality, and budget targets
 </li>
 <li>
 Review and approve designs, calculations, and drawings as per relevant codes and standards
 </li>
 <li>
 Drive design optimization, quantity control, and cost efficiency
 </li>
 <li>
 Coordinate with electrical, MEP, site, and project teams to resolve engineering issues
 </li>
 </ul>
 
 
 
 
 
 Requirements:
 
 
 <ul>
 <li>
 Strong experience in GIS/AIS substations, control room buildings, foundations, steel &amp; RCC structures
 </li>
 <li>
 Proficiency in civil, structural, and geotechnical design aspects for power infrastructure
 </li>
 <li>
 Familiarity with STAAD, ETABS, AutoCAD, Revit, and MS Office (TEKLA preferred)
 </li>
 </ul>
 
 
</div>

Project Engineering Manager – Substation

Trust Arabia Administrative Services & Consultancy

Job DescriptionWe are seeking a highly experienced Operation Engineer (Electrical) as part of a tender submission for utility-scale Solar Power Plants. The successful candidate will be responsible for HV/MV electrical operations, including 220 kV and 33 kV switching, coordination with Kahramaa, supervision of site operations, maintenance planning, contract administration, and ensuring full compliance with HSE and asset management requirements.Key ResponsibilitiesElectrical Operations &amp; Switching<ul><li>Perform and authorize high-voltage switching operations for 220 kV and 33 kV systems for solar power plants in coordination with Kahramaa.</li><li>Hold broad authority to plan and execute HV switching in line with approved technical procedures and HSE requirements.</li><li>Possess hands-on experience with 220 kV GIS systems, 33 kV AIS, and associated switchgear.</li></ul>Kahramaa Certification &amp; Interface<ul><li>Successfully complete and pass the Kahramaa familiarization and certification process as a 220 kV Substation Switching Engineer within three (3) months of assignment.</li><li>Act as the technical interface with Kahramaa for system interruptions, switching coordination, and operational matters.</li><li>Monitor power import/export between the plant and Kahramaa and lead the monthly billing and invoicing process.</li></ul>Failure to obtain Kahramaa authorization may result in candidate rejection as per contract requirements. All certification-related costs shall be borne by the Contractor.Planning &amp; Scheduling<ul><li>Support the Maintenance Supervisor (Power) in planning and scheduling preventive and corrective maintenance activities in line with asset management policies.</li><li>Create and manage work orders in SAP, including materials, manpower, and logistics coordination.</li></ul>Technical Leadership &amp; Supervision<ul><li>Provide technical guidance and support to technicians, ensuring required competency levels.</li><li>Supervise site execution of work orders, ensuring safe, timely, and efficient completion.</li><li>Lead troubleshooting activities and support Reliability Engineers in RCA, FMEA, and failure investigations.</li></ul>HSE &amp; Compliance<ul><li>Lead start-of-shift meetings, toolbox talks, and enforce HSE compliance.</li><li>Ensure completion of risk assessments, permits to work (PTW), JHAs, LOTO, and electrical authorizations prior to work commencement.</li></ul>Contracts &amp; Administration<ul><li>Prepare Scopes of Work, technical specifications, basic drawings, and Bills of Quantities (BOQs).</li><li>Administer maintenance contracts, including Release Orders and Service Entry Sheets in SAP.</li><li>Manage day-to-day coordination with contractors and service providers.</li></ul>Commissioning &amp; Handover<ul><li>Participate in commissioning and handover of new assets.</li><li>Verify project dossiers, as-built drawings, maintenance manuals, vendor lists, and manage warranties.</li></ul>Work Close-Out<ul><li>Verify completion of work orders and ensure SAP updates for materials consumed and actual man-hours.</li></ul>Qualifications &amp; Experience<ul><li>Bachelor&rsquo;s Degree (4 years) in Electrical Engineering from an internationally recognized university or equivalent.</li><li>Minimum 10&ndash;12 years of experience in electrical engineering practices related to power transmission and distribution systems.</li><li>Strong experience in electrical power system operations and MV/HV maintenance.</li><li>Demonstrated experience with:</li><li>Power Transformers</li><li>220 kV GIS and 33 kV AIS</li><li>HVAC systems</li><li>Fire water pumps</li><li>Fire &amp; Gas systems</li></ul>Skills &amp; Competencies<ul><li>Strong leadership and decision-making skills.</li><li>Excellent understanding of electrical safety rules and HV switching procedures.</li><li>Proficiency in SAP PM module.</li><li>Ability to work under high operational and safety-critical environments.</li></ul>How to ApplyQualified candidates meeting the above requirements are invited to apply with an updated CV and relevant certifications.Job Type: Full-timeExperience:<ul><li>Operation Engineer: 10 years (Preferred)</li></ul>

Operation Engineer

Core Responsibilities:<ul><li>Prepares site plan and substation layout details for the substations (Indoor , Outdoor &amp; Package</li></ul>type)<ul><li>Supervises the construction of the new substations and maintenance of the existing substations</li></ul>and report to Project Coordinator / KAHRAMAA Civil Engineers.<ul><li>Finds and propose a suitable solution for adding new equipment in the existing substations and</li></ul>supervises.<ul><li>Discusses and finds the suitable design for the substations to be built by consumers and</li></ul>approves the building permit application<ul><li>Supervises the construction of the substations to be built by consumers</li><li>Supervises the maintenance of the substations to be done by consumers</li><li>Review, inspect and approve contractor&rsquo;s material submittals.</li><li>Performs other related duties as needed upon request by the supervisor</li><li>Develops accurate reports (weekly, monthly, etc.) and submits them to Project Coordinator for</li></ul>analysis of construction activities on pre-defined parameters<ul><li>Verifying of BOQ (completed quantities) submitted by Contractors</li><li>Material reconciliation on site (new and old/dismantled) &ndash; verify &amp; report</li><li>Works in cooperation with KAHRAMAA Quality Assurance and Continual Improvement department</li></ul>on securing and maintaining the quality of works on site.<ul><li>Carries out and ensures that all activities under his responsibility, within the Construction Section,</li></ul>are in line with KAHRAMAA health and safety regulations.<ul><li>Ensure and assist Contractors in provision of all documents necessary for commencement and</li></ul>execution of the site works (building permits, demarcation, LOA provision, gate passes, etc&hellip;)<ul><li>Monitoring CNTRACTOR&rsquo;S Daily, Weekly and Monthly Progress Reports.</li><li>Participate in Daily, Weekly and monthly progress meetings with the Contractors.</li><li>Ensure optimal utilization of personnel and security of materials and equipment.</li></ul>Job Type: Full-time

Civil Engineer

JOB HUB GLOBAL

Our client is a globally recognized organization operating in Kuwait, delivering advanced solutions in power systems, substation automation, and electrical infrastructure. With a strong focus on engineering excellence and reliable project execution, the client supports critical energy and infrastructure projects across the region. As part of ongoing and upcoming initiatives in Kuwait, the client is seeking to strengthen its engineering team by appointing an experienced Electrical Design Engineer to support the design and construction of protection, DFR, and BBP panels for substation and automation projects.<ul><li>Location: Kuwait</li><li>Working Days: 6 days per week</li><li>Working Hours: 8 hours per day</li><li>Contract Duration: 12 months (extendable)</li><li>Requirement Period: January 1, 2026 &ndash; December 31, 2026</li><li>Salary: To be discussed</li></ul>Role Overview The Electrical Design Engineer will be responsible for supporting the design and construction of new electrical panels, including protection panels, DFR panels, and BBP panels, for power and energy projects in Kuwait. The role involves detailed engineering design, schematic preparation, and technical support for substation automation and protection systems. This is a long-term contractual position with our client and is ideal for professionals with strong hands-on experience in protection and control panel design.Key Responsibilities<ul><li>Design and develop electrical schematics for protection panels, DFR panels, BBP panels, SCADA panels, and power quality panels.</li><li>Prepare detailed control circuit diagrams, wiring diagrams, and terminal layouts.</li><li>Support the construction and modification of new electrical panels in line with project specifications and standards.</li><li>Ensure designs comply with applicable substation schemes, automation requirements, and protection philosophies.</li><li>Work closely with project, testing, and commissioning teams to support execution activities.</li><li>Perform and support testing of protection relays using secondary injection methods.</li><li>Simulate switchgear signals for RTU and SCADA testing.</li><li>Review and update drawings based on site feedback, testing results, and as-built requirements.</li><li>Coordinate with internal teams to ensure timely delivery of design outputs.</li><li>Maintain proper technical documentation and drawing records.</li></ul>Qualifications<ul><li>Bachelor&rsquo;s Degree in Electrical Engineering (mandatory).</li></ul>Experience Requirements<ul><li>Minimum 7 years of experience as an Electrical Design Engineer in protection and control systems.</li><li>Proven experience in schematic preparation for protection panels, SCADA panels, and power quality panels.</li><li>Strong working experience with control circuits.</li><li>In-depth knowledge of substation schemes, protection systems, and automation concepts.</li><li>Hands-on experience with protection relays and substation equipment from leading OEMs (experience with Siemens devices is preferred).</li><li>Practical experience in secondary injection testing and SCADA/RTU signal simulation.</li></ul>Skills &amp; Competencies<ul><li>Strong understanding of protection and control engineering principles.</li><li>Ability to interpret technical specifications, single-line diagrams, and protection philosophies.</li><li>High attention to detail and accuracy in design documentation.</li><li>Good coordination and communication skills.</li><li>Ability to work independently and meet project deadlines.</li></ul>Additional Requirements<ul><li>Valid Kuwait driving license (mandatory).</li><li>Availability to support the project for the full requirement period.</li></ul>Why Join<ul><li>Opportunity to work on critical substation and protection projects in Kuwait.</li><li>Long-term contract with extension potential.</li><li>Exposure to complex electrical systems and advanced protection technologies.</li><li>Professional and structured project environment.</li></ul>Please note that applicants must answer the pre-screening questions to be considered for this position.THOSE WHO CAN JOIN IMMEDIATELY SHOULD APPLY. REGRETTABLY ONLY SHORTLISTED CANDIDATES WILL BE CONTACTEDAbout Job Hub GlobalAt Job Hub Global, we believe that people are at the heart of every great organization. As a premier HR consultancy, we are passionate about helping businesses thrive by providing bespoke recruitment, staff outsourcing, workforce solutions, and HR management consultancy services that are tailored to meet your unique needs.With a deep understanding of the evolving workplace, we are committed to connecting exceptional talent with exceptional companies. Our mission is to empower businesses with the right people, processes, and strategies to drive success. Whether you&rsquo;re looking to build a high-performing team, streamline your workforce, or navigate the complexities of HR management, Job Hub Global is here to partner with you every step of the way.Together, we&rsquo;ll turn challenges into opportunities and dreams into achievements. Your success is our business!Job Types: Full-time, Contract Contract length: 24 monthsApplication Question(s):<ul><li>How many years of experience do you have as an Electrical Design Engineer in protection and control panel design?</li><li>What is your highest educational qualification?</li><li>Do you have hands-on experience in preparing schematics for protection panels, SCADA panels, DFR panels, or power quality panels? Please briefly specify.</li><li>Do you have practical experience working with control circuits and substation automation schemes?</li><li>Do you have experience in testing protection relays using secondary injection and simulating switchgear signals for RTU/SCADA testing?</li><li>Do you have experience working with Siemens or equivalent protection devices?</li><li>Do you hold a valid Kuwait driving license?</li><li>Are you available to support the project during the period January 1, 2026 to December 31, 2026 in Kuwait?</li><li>Where are you currently based?</li></ul>

Electrical Design Engineer – Panel Design - Kuwait

Core Responsibilities:<ul><li>Inspects the civil construction and maintenance works of the distribution substation buildings</li></ul>within its premises, make sure that executed works are complying with KAHRAMAA standardsand drawings, reporting from site and carries out any office works related to this.<ul><li>Review estimated quantities of the requested works and report to the KAHRAMAA Senior</li></ul>Engineer / Civil Engineer,<ul><li>Reports work progress to the KAHRAMAA Senior Engineer / Civil Engineer,</li><li>Performs other related duties as request by the KAHRAMAA Senior Engineer / Civil Engineer.</li><li>Approval of material quantity on site as designated by KAHRAMAA Senior Engineer / Civil</li></ul>Engineer<ul><li>Works in cooperation with KAHRAMAA Quality Assurance and Continual Improvement department</li></ul>on securing and maintaining the quality of works on site.<ul><li>Carries out and ensures that all activities under his responsibility, within the Construction Section,</li></ul>are in line with KAHRAMAA health and safety regulations.Self Management Responsibilites:<ul><li>Defines and agree performance goals (KRA) at the start of the year in discussion with the Project</li></ul>Coordinator and ensures that the goals are achieved during the course of the year<ul><li>Identifies the training and development requirements for self and agrees on them with the</li></ul>Project Coordinator to ensure that the required trainings are arranged and attended<ul><li>Keeps abreast of professional developments, new techniques and current issues through</li></ul>continued education and professional growthJob Type: Full-time

Civil Inspector

Larsen & Toubro

<div>
 Diploma/ITI with minimum 10 years of Experience in AutoCAD works in EHV substation related works Equipment layouts, Single line Diagram, Earthing layouts, Cable Routing layouts, Cable Tray Layouts, Tender Layout preparation, Civil &amp; MEP drawings review/ interdisciplinary check, Vendor drawing review.
 
 
 Diploma/ITI with minimum 10 years of Experience in AutoCAD works in EHV substation related works Equipment layouts, Single line Diagram, Earthing layouts, Cable Routing layouts, Cable Tray Layouts, Tender Layout preparation, Civil &amp; MEP drawings review/ interdisciplinary check, Vendor drawing review.
 
 
 Diploma/ITI with minimum 10 years of Experience in AutoCAD works in EHV substation related works Equipment layouts, Single line Diagram, Earthing layouts, Cable Routing layouts, Cable Tray Layouts, Tender Layout preparation, Civil &amp; MEP drawings review/ interdisciplinary check, Vendor drawing review.
</div>

SR. CAD DESIGNER

Explore 370+ Substation engineer in Doha Qatar this January. Find roles across top companies and apply now to boost your career.