hvac technician

a/c technician

ac technician

ac technician cum driver

kitchen technician

aircraft maintenance technician

Emirates

<div>
 
 Job Purpose
 
 
 
 At Base Maintenance, our expert engineers deliver unparalleled service for all aircraft checks, from comprehensive inspections to major system repairs. We handle cabin retrofits, aircraft deliveries, and detailed inspection programs for Airbus A380, A350 and Boeing 777.
 
 
 Our team excels in timely, cost-effective solutions for A &amp; C checks, engine change, and landing gear changes, along with unscheduled maintenance and pre-service checks.
 
 
 As an Aircraft Technician you will be, responsible for carrying out maintenance tasks on Emirates and third party aircraft components in accordance with company procedures and regulations. The Aircraft Technician works as part of a team under the direction and guidance of the assigned Licensed Aircraft Engineer within the appropriate trade/cross trade disciplines for which they have been trained
 
 
 
 In This Role You Will
 
 
 
 <ul>
 <li>
 Carry out routine aircraft/engine/component servicing/ maintenance and/or approved structural repairs compliant to manufacturers procedures whilst observing all safety procedures for fluid replenishment, aircraft refuelling, aircraft systems charging/servicing as required.
 </li>
 <li>
 Complete any component replacement and other maintenance activities as directed by immediate Supervisor. This will include the ability to obtain and understand Aircraft Maintenance Manual (AMM), Illustrated Parts catalogue (IPC), Component Maintenance Manual (CMM) or other approved documentation required to carry out the task.
 </li>
 <li>
 Assist Licensed Aircraft Engineers in trouble shooting, defect rectifications and carrying out modifications while also performing instructions contained in job card.
 </li>
 <li>
 Participate and promote in creating a safety culture in an effort to minimise accidents and highlight any deficiencies/failures that can lead to such accidents. Ensure all work locations are kept clean and maintain excellent housekeeping. This includes being aware and communicating safety shortfalls.
 </li>
 <li>
 Maintain vigilance in ensuring work areas (including the ramp), vehicles, stands, lockers are free of FOD and that toolboxes are regularly audited, maintained and kept clean.
 </li>
 <li>
 Responsible to maintain knowledge of airport safety regulations including holding and maintaining an Airport Driving Permit. Should be fully conversant and compliant with airport manoeuvring area requirements.
 </li>
 <li>
 Be responsible for managing performance by working closely with supervisor on performance management processes, using My BC system to agree on development plans including training and development requirements.
 </li>
 <li>
 Ensure prompt attendance to all allocated tasks with the intent to maximise ground time and avoid operational delays/disruptions. This includes obtaining aircraft/component status brief from Licensed Aircraft Engineer (LAE), reports and preparing work accordingly. Communicate any aircraft/ component/structural defects to the LAE in a timely manner and ensure relevant information is during shift handovers.
 </li>
 <li>
 As and when required, use current knowledge and experience in aircraft maintenance to assist in Resource allocation using RMS / RTC.
 
 
 </li>
 </ul>
 Qualification
 
 
 
 To be considered for the role you must meet the below requirements:
 
 
 
 <ul>
 <li>
 Experience: 5+ Years in aircraft maintenance environment
 </li>
 <li>
 Qualification: 12 + 2
 </li>
 <li>
 Knowledge/skills: Apprenticeship in Aircraft Maintenance or equivalent training with a reputable airline or an approved aircraft maintenance organisation or Engineering Aircraft Maintenance License.
 
 
 </li>
 </ul>
 
 Details Of Safety Sensitive Role
 
 
 
 <ul>
 <li>
 Working at height Yes
 </li>
 <li>
 Exposure to hazardous energy systems Yes
 </li>
 <li>
 Heavy lifting Yes
 </li>
 <li>
 Working in areas with motorised mobile equipment Yes
 </li>
 <li>
 Work in confined spaces Yes
 </li>
 <li>
 Contact with contaminations materials (Humans/Animals/Chemicals Yes
 </li>
 <li>
 Contact with dangerous good Yes
 </li>
 <li>
 Work in an extremely noisy environment Yes
 </li>
 <li>
 Work in heat Yes
 </li>
 <li>
 Working with pressurised substances Yes
 </li>
 <li>
 Exposure to fixed protruding sharp objects Yes
 </li>
 <li>
 Exposure to contact with moving/falling objects Yes
 </li>
 <li>
 Airport driving permit Yes
 </li>
 <li>
 Safety Sensitive: Yes
 </li>
 <li>
 PSMP: Yes
 
 
 </li>
 </ul>
 Salary &amp; benefits
 
 
 0
 
 
 Join us in Dubai and enjoy an attractive tax-free salary and travel benefits that are exclusive to our industry, including discounts on flights and hotels stays around the world. Find out what it&rsquo;s like to live and work in our fast-paced, cosmopolitan home city in the Dubai Lifestyle section of our website www.emirates.com/careers
</div>

Aircraft Technician

Ame Question Paper

Job PurposeAtBase Maintenance, our expert engineers deliver unparalleled service for all aircraft checks, from comprehensive inspections to major system repairs. We handle cabin retrofits, aircraft deliveries, and detailed inspection programs for Airbus A380, A350 and Boeing 777. Our team excels in timely, cost-effective solutions for A & C checks, engine change, and landing gear changes, along with unscheduled maintenance and pre-service checks.Responsible for carrying out maintenance tasks on Emirates and third party aircraft components in accordance with company procedures and regulations. The Aircraft Technician works as part of a team under the direction and guidance of the assigned Licensed Aircraft Engineer within the appropriate trade/cross trade disciplines for which they have been trained.<ul><li>Carry out routine aircraft/engine/component servicing/ maintenance and/or approved structural repairs compliant to manufacturers procedures whilst observing all safety procedures for fluid replenishment, aircraft refuelling, aircraft systems charging/servicing as required.</li><li>Complete any component replacement and other maintenance activities as directed by immediate Supervisor. This will include the ability to obtain and understand Aircraft Maintenance Manual (AMM), Illustrated Parts catalogue (IPC), Component Maintenance Manual (CMM) or other approved documentation required to carry out the task.</li><li>Assist Licensed Aircraft Engineers in trouble shooting, defect rectifications and carrying out modifications while also performing instructions contained in job card.</li><li>Participate and promote in creating a safety culture in an effort to minimise accidents and highlight any deficiencies/failures that can lead to such accidents. Ensure all work locations are kept clean and maintain excellent housekeeping. This includes being aware and communicating safety shortfalls.</li><li>Maintain vigilance in ensuring work areas (including the ramp), vehicles, stands, lockers are free of FOD and that toolboxes are regularly audited, maintained and kept clean.</li><li>Responsible to maintain knowledge of airport safety regulations including holding and maintaining an Airport Driving Permit. Should be fully conversant and compliant with airport manoeuvring area requirements.</li><li>Be responsible for managing performance by working closely with supervisor on performance management processes, using My BC system to agree on development plans including training and development requirements.</li><li>Ensure prompt attendance to all allocated tasks with the intent to maximise ground time and avoid operational delays/disruptions. This includes obtaining aircraft/component status brief from Licensed Aircraft Engineer (LAE), reports and preparing work accordingly. Communicate any aircraft/ component/ structural defects to the LAE in a timely manner and ensure relevant information is during shift handovers.</li><li>As and when required, use current knowledge and experience in aircraft maintenance to assist in Resource allocation using RMS / RTC.</li></ul>Qualification<ul><li>Experience: Engineering / Other 5+ Years</li><li>Qualifications: Graduate (12+2)</li><li>Knowledge/skills:<ul><li>Apprenticeship in Aircraft Maintenance or equivalent training with a reputable airline or an approved aircraft maintenance organisation or Engineering Aircraft Maintenance License.</li></ul></li><li>Details of Safety Sensitive role ENA<ul><li>Working at height Yes</li><li>Exposure to hazardous energy systems Yes</li><li>Heavy lifting Yes</li><li>Working in areas with motorised mobile equipment Yes</li><li>Work in confined spaces Yes</li><li>Contact with contaminations materials (Humans/Animals/Chemicals Yes</li><li>Contact with dangerous good Yes</li><li>Work in an extremely noisy environment Yes</li><li>Work in heat Yes</li><li>Working with pressurised substances Yes</li><li>Exposure to fixed protruding sharp objects Yes</li><li>Exposure to contact with moving/falling objects Yes</li><li>Airport driving permit Yes</li><li>Other (please specify)</li><li>Other languages besides English:</li><li>Safety Sensitive Role: Yes</li><li>PSMP: Yes</li><li>Leadership Role: No</li></ul></li></ul>Salary & benefitsJoin us in Dubai and enjoy an attractive tax-free salary and travel benefits that are exclusive to our industry, including discounts on flights and hotels stays around the world. Find out what it's like to live and work in our fast-paced, cosmopolitan home city in the Dubai Lifestyle section of our website

Aircraft Technician - Base Maintenance

The Emirates Group

<div><h5 class="jobSectionHeader">Job Purpose
</h5>At Emirates, we believe in connecting the world, to and through, our global hub in Dubai; and in constantly innovating to ensure our customers &lsquo;Fly Better&rsquo;. Emirates Engineering is a cutting-edge aircraft maintenance facility, GCAA CAR V approved, supporting Emirates&rsquo; vast Airbus and Boeing fleet and thirty other airlines through third-party contracts. Our highly qualified team excels in maintenance, engineering, quality, planning, and logistics, setting industry standards with an unwavering commitment to safety and excellence.
Workshop Technician (Cabin Workshop) - Responsible for carrying out maintenance/ calibration tasks on Emirates and third party aircraft components/ tools and equipment in accordance with company procedures and regulations. The job holder works as part of a team under the direction and guidance of the assigned supervisor/ Engineer within the appropriate trade/cross trade disciplines for which they have been trained.
In this role you will:
<ul><li>Carry out routine component/ tools servicing and calibration/ maintenance /modification and, or approved structural repairs compliant to manufacturers procedures whilst observing all safety procedures.
</li><li>Complete any component / tools maintenance and other tasks as assigned by immediate Supervisor/ Engineers. This will include the ability to obtain and understand Aircraft Maintenance Manual (AMM), Illustrated Parts catalogue (IPC), Component Maintenance Manual (CMM), standard Practice Manual (SPM), Quality Manual ISO/IEC 17025 or other approved documentation required to carry out the task.
</li><li>Assist supervisor/ Engineers in trouble shooting, defect rectifications and carrying out modifications while performing instructions contained in the job card.
</li><li>Ensure all work locations are kept clean and maintain excellent housekeeping. Participate and promote in creating a safety culture in an effort to minimise accidents and highlight any deficiencies/failures that can lead to such accidents. This includes being aware and communicating safety shortfalls. Maintain vigilance in ensuring work areas (including the ramp), vehicles, stands, lockers are free of FOD and that toolboxes are regularly audited, maintained and kept clean.
</li><li>Ensure prompt attendance to all allocated tasks with the intent to reduce TAT and avoid operational delays/disruptions. Should be able to communicate any aircraft/ component/ structural defects found to the supervisor/ Engineer in an expedient manner and ensure during shift handovers all required information is clearly passed to the staff taking over.
</li><li>Enable to perform testing, verifications, services to monitor, assist and support all Overhaul/Repair/Refurbishment/Inspection &amp; Calibration tasks required as per special procedures and manuals used in respective workshop.
</li></ul><h5 class="jobSectionHeader">Qualification
</h5>To be considered for this role you must meet the below Qualifications &amp; Experience:
Degree in Engg in Aeronautical subjects/Mechanical/Avionics/Electronic/Tech Engineering OR Aircraft Maintenance Engineering Licence OR Engineering Apprenticeship.
5+ Years of post qualification experience in aviation field, out of which minimum 2 years should be in workshop environment e.g. W&amp;B, Avionics, Cabin, Structures or Calibration, Hydraulic, Pneumatic, Fuel &amp; Oil, Landing Gear.
Fully conversant with Air Legislation and legal matters that relate to the operation and maintenance of aircraft to international standards.
<h5 class="jobSectionHeader">Salary &amp; benefits
</h5>Join us in Dubai and enjoy an attractive tax-free salary and travel benefits that are exclusive to our industry, including discounts on flights and hotels stays around the world. Find out what it&rsquo;s like to live and work in our fast-paced, cosmopolitan home city in the Dubai Lifestyle section of our website www.emirates.com/careers</div>

Workshop Technician

<div><h5 class="jobSectionHeader">Job Purpose
</h5>A first of its kind training facility in Dubai the Emirates Flight Training Academy EFTA is located in Dubai South Dubai World Central DWC With its unique facilities and resources Emirates Flight Training Academy offers the opportunity to learn to fly in the most advanced flight training academy in the world Our fully operational flight operations centre is dedicated to Emirates Flight Training Academy cadets only making flight training part of everyday life at the Academy This means you will have the opportunity to gain a complete operational experience in one holistic environment.
As a Simulator Technician, you will carry out preventive maintenance repair and inspection tasks on Emirates training simulators and associated training equipment. Working under the direction of the Engineer Flight Simulators To perform Daily Maintenance checks on all training devices and support visual calibration checks and setups To take on complex technical tasks under the direction and where required supervision of the Engineers The simulator technician working with the Engineer Flight Simulator will ensure that the Flight Training equipment is fully serviceable and suitably maintained to manufacturers specifications.
In this role, you will;
<ul><li>Carry out routine daily, weekly and monthly maintenance tasks as prescribed by the manufacturer. To ensure that adequate records of maintenance activities are maintained in accordance with approved Quality Plan.
</li><li>Carry out daily maintenance checks on flight simulators to verify systems operation and to maintain records as required by the regulatory authorities. Will require technical familiarisation with simulator systems to effectively check device operation. Where defects are found and are of a minor nature technician will replace or repair and document action taken. Where defects are not correctable, the technician will make the Engineer aware of the defect for further guidance.
</li><li>Perform weekly corrective maintenance on simulator visual systems and service training equipment to ensure that the equipment is effectively maintained to manufacturers recommendations.
</li><li>Ensure cabin training simulators are maintained to the highest standards and that all cabin equipment is correctly maintained.
</li><li>Perform repair tasks on flight simulators and cabin training simulators. Will use technical skills to propose best solution to rectify the defects in liaison with other departments and external contractors.
</li><li>Conduct Flight simulator configuration changes in accordance with procedures. These changes can be time consuming and technically complex in nature. Will need to resolve any faults or problems that occur following these configuration changes or report complex problems to the Engineer.
</li><li>To assist Engineer Flight Simulators in device fault rectification and equipment overhaul. Will require electro mechanical engineering principles and skills.
</li><li>Collate and enter simulator training log usage and defect details clearly and concisely into recording utility, ensuring sufficient information on defect is entered for reference by Flight crew and Engineers.
</li></ul><h5 class="jobSectionHeader">Qualification
</h5>To be considered for this role, you must meet the below;
<ul><li>Graduate of Engineering with 2 years or experience OR A level with 5 years of experience.
</li><li>2 years experience in a civil aircraft-engineering environment, which includes a minimum of two years on the job training in an airline or an approved aircraft maintenance organisation; or as an alternative, 3 years experience with a civil engineering organisation in a technical/maintenance capacity.
</li></ul>At Emirates Group, we&rsquo;re committed to providing our employees with opportunities to grow and develop their careers. If you&rsquo;re looking for a challenging and rewarding opportunity, apply today and join our team!
<h5 class="jobSectionHeader">Salary &amp; benefits
</h5>Join us in Dubai and enjoy an attractive tax-free salary and travel benefits that are exclusive to our industry, including discounts on flights and hotels stays around the world. Find out what it&rsquo;s like to live and work in our fast-paced, cosmopolitan home city in the Dubai Lifestyle section of our website www.emirates.com/careers</div>

Simulator Technician

<div>
 
 Job Purpose
 
 
 
 The Cabin &amp; Safety Workshop maintains the interior furnishings, seats, and safety equipment on Emirates aircraft. They are divided into several specialized areas:
 
 
 
 Evacuation and Safety Workshop
 
 : Tests, repairs, and overhauls emergency equipment like escape slides, life jackets, HST, oxygen cylinders and fire extinguishers for the A380, A350 and B777 fleets.
 
 
 
 Cabin Workshops:
 
 Repair and Overhauls passenger seats, galleys, lavatories, carpets and other cabin and cargo components, including leather and upholstery repair for all Emirates fleets - A319, A380, A350 and B777.
 
 
 
 Line &amp; Base heavy Support Group:
 
 Repairs and Overhauls cabin components for all Emirates fleets - A319, A380, A350 and B777.
 
 
 Workshop Technician is responsible for carrying out maintenance/ calibration tasks on Emirates and third-party aircraft components/ tools and equipment in accordance with company procedures and regulations. The job holder works as part of a team under the direction and guidance of the assigned supervisor/ Engineer within the appropriate trade/cross trade disciplines for which they have been trained.
 
 
 
 In This Role You Will
 
 
 
 <ul>
 <li>
 Carry out routine component/ tools servicing and calibration/ maintenance /modification and, or approved structural repairs compliant to manufacturers procedures whilst observing all safety procedures.
 </li>
 <li>
 Complete any component / tools maintenance and other tasks as assigned by immediate Supervisor/ Engineers. This will include the ability to obtain and understand Aircraft Maintenance Manual (AMM), Illustrated Parts catalogue (IPC), Component Maintenance Manual (CMM), standard Practice Manual (SPM), Quality Manual ISO/IEC 17025 or other approved documentation required to carry out the task.
 </li>
 <li>
 Assist supervisor/ Engineers in trouble shooting, defect rectifications and carrying out modifications while performing instructions contained in the job card.
 </li>
 <li>
 Ensure all work locations are kept clean and maintain excellent housekeeping. Participate and promote in creating a safety culture in an effort to minimise accidents and highlight any deficiencies/failures that can lead to such accidents. This includes being aware and communicating safety shortfalls. Maintain vigilance in ensuring work areas (including the ramp), vehicles, stands, lockers are free of FOD and that toolboxes are regularly audited, maintained and kept clean.
 </li>
 <li>
 Ensure prompt attendance to all allocated tasks with the intent to reduce TAT and avoid operational delays/disruptions. Should be able to communicate any aircraft/ component/ structural defects found to the supervisor/ Engineer in an expedient manner and ensure during shift handovers all required information is clearly passed to the staff taking over.
 </li>
 <li>
 Enable to perform testing, verification, services to monitor, assist and support all Overhaul/Repair/Refurbishment/Inspection &amp; Calibration tasks required as per special procedures and manuals used in respective workshop.
 
 
 </li>
 </ul>
 Qualification
 
 
 
 To be considered for this role you must meet the below requirements:
 
 
 
 <ul>
 <li>
 Degree in Engineering in Aeronautical subjects/Mechanical/Avionics/Electronic/Tech Engineering OR Aircraft Maintenance Engineering Licence OR Engineering Apprenticeship.
 </li>
 <li>
 5+ Years of post qualification experience in aviation field, out of which minimum 2 years should be in workshop environment e.g. W&amp;B, Avionics, Cabin, Structures or Calibration, Hydraulic, Pneumatic, Fuel &amp; Oil, Landing Gear.
 
 
 </li>
 </ul>
 Salary &amp; benefits
 
 
 Join us in Dubai and enjoy an attractive tax-free salary and travel benefits that are exclusive to our industry, including discounts on flights and hotels stays around the world. Find out what it&rsquo;s like to live and work in our fast-paced, cosmopolitan home city in the Dubai Lifestyle section of our website www.emirates.com/careers .
</div>

Workshop Technician (Cabin Workshop)

G-Lux Interior Solutions

<div>
 
 
 Company Description
 
 
 
 G-LUX Solutions, incorporated in 2023, is the first global company to successfully adopt an innovative mobile solution for restoring and maintaining luxury interiors in yachts, commercial and private jets. The company excels in applying stringent and sophisticated aviation principles to the maritime setting to cater to delicate industry demands. All materials, equipment, and processes embrace a 24/7 resilient work format, enabling 100% mobility of services. G-LUX is a perfect solution in the world of premium.
 
 
 
 
 
 
 Role Description - B2 Aircraft Maintenance Engineer
 
 
 
 We are seeking a
 
 full-time, on-site B2 Aircraft Maintenance Engineer with a valid GCAA AML (Category B2)
 
 and
 
 proven experience on B737 NG and B737 MAX aircraft
 
 . The role is responsible for carrying out
 
 scheduled and unscheduled maintenance
 
 in line with operational requirements. Duties include
 
 inspection, troubleshooting, maintenance, and certification of aircraft avionics, electrical, and electronic systems
 
 , ensuring continued airworthiness and strict compliance with
 
 CAR-145 regulations
 
 , OEM manuals, and company procedures. The engineer may supervise maintenance activities, exercise certification privileges, and support safe, efficient aircraft operations.
 
 
 
 
 
 
 Qualifications
 
 
 <ul>
 <li>
 Conduct maintenance, inspection, troubleshooting, and general repair of aircraft avionics, electrical, and electronic systems.
 </li>
 <li>
 Assist engineers in all aspects of aircraft maintenance operations.
 </li>
 <li>
 Exercise certification privileges within the scope of B2 authorization and approve the return to service of aircraft&nbsp;following maintenance.
 </li>
 <li>
 Ensure all work is completed in a timely manner and in accordance with CAR-145 and other requirements of civil aviation authority regulations, manufacturer manuals, and company procedures.
 </li>
 <li>
 Perform maintenance tasks while monitoring and maintaining electrical systems and aircraft instruments
 </li>
 <li>
 Interpret and analyze complex technical information, engineering manuals, and diagrams to support maintenance and&nbsp;troubleshooting.
 </li>
 <li>
 Maintain detailed records of maintenance, certifications, inspections, and ensure complete documentation of aircraft maintenance.
 </li>
 <li>
 Ensure replenishment of aircraft components and that standard aviation protocols and engineering practices are followed.
 </li>
 <li>
 Collaborate with different departments and crew to debrief issues, implement corrective measures, and keep senior managers informed of maintenance requirements.
 </li>
 <li>
 Participate in initial, recurrent, and differences training to maintain technical competence, regulatory compliance, and&nbsp;proficiency with new aircraft variants or additional systems.
 </li>
 <li>
 Contribute to the continuous improvement of maintenance procedures, safety standards, and team efficiency.
 </li>
 <li>
 Willing to travel within the UAE and internationally as required.
 </li>
 </ul>
 
 
 
 
 
 Requirements
 
 
 <ul>
 <li>
 
 Valid GCAA Aircraft Maintenance Licence (AML) &ndash; Category B2 (mandatory)
 
 </li>
 <li>
 
 Type-rated and hands-on experience on B737 NG and B737 MAX (highly preferred)
 
 </li>
 <li>
 Minimum
 
 3&ndash;5 years certifying experience
 
 </li>
 <li>
 Strong knowledge of avionics systems, MEL, troubleshooting, and independent checks
 </li>
 <li>
 Excellent English communication skills
 </li>
 <li>
 Immediate joiners preferred
 </li>
 </ul>
 
 
 
 
 
 Preferred Attributes
 
 
 <ul>
 <li>
 Strong attention to detail and safety awareness
 </li>
 <li>
 Excellent diagnostic and problem-solving skills, with the ability to make sound decisions under pressure.
 </li>
 <li>
 Precision, accountability, and a proactive attitude.
 </li>
 <li>
 Ability to work independently and as part of a multidisciplinary team.
 </li>
 <li>
 Excellent reporting, documentation, and communication skills.
 </li>
 <li>
 Committed to maintaining high standards of aircraft reliability, quality, and compliance.
 </li>
 </ul>
 
 
 
 
 Benefits
 
 <ul>
 <li>
 Competitive salary package
 </li>
 <li>
 Medical insurance
 </li>
 <li>
 Annual leave as per UAE Labour Law
 </li>
 <li>
 Professional training and development
 </li>
 </ul>
</div>

B2 Aircraft Maintenance Engineer

Adecco Holding Emirates B.V. (Dubai Branch)

<h3>OBJECTIVES & MISSION</h3>Reporting directly to a Production Line Supervisor, you will also collaborate with the Repair technician-Leader of your production line Your objectives and mission:You are involved in repair production activities. You will analyse a failure/reason for a customer return and repair the equipment under the conditions defined by the CMM (Component Maintenance Manual), SB, SIL, and MPTA maintenance documents in force or by the manufacturing file, respecting the regulations in force, the quality, safety/environment, and leadtimes requirements. MAIN ACTIVITIESYour main tasks/activities will be to maintain, repair, calibrate, and test aviation equipment in accordance with the standards in force:<ul><li>Handling Repair Orders according to instructions</li><li>Repairing according to the required standard</li><li>Using only the industrial means and procedures specified in the schedule/CMM</li><li>Reporting any deviations from the standards to the Support staff</li><li>Reporting your work in real time (clocking)</li><li>Preparing shop findings reports (SFR) and repair reports (RR)</li><li>Participating in the processing and sanctioning of non-conformities detected during the repair phases</li><li>Conducting the final inspection of repaired assemblies</li><li>Verifying the airworthiness directives before releasing equipment</li><li>Ensuring that repair documentation/files are properly prepared</li><li>Ensuring the integrity, storage, and availability of tooling and conducting periodic inventories at the workl stations.</li><li>Actively participating in daily coordinating activities with the Technician-Leader & Supervisor</li></ul> Complying with safety and environmental standards:<ul><li>Participating actively in Environment/Safety training</li><li>Reporting any risk situation (SPD, PA)</li><li>Wearing personal protective equipment</li><li>Complying with Safety Documentation</li></ul>

Repair Technician-6 months contract (Extendable-immediately available)

Explore 1127+ Aircraft maintenance technician in Dubai this January. Find roles across top companies and apply now to boost your career.