aircraft mechanic am-2 (uh-60 army aviation) - camp buehring, kuwait Jobs in Kuwait

aircraft mechanic am-2 (uh-60 army aviation) - camp buehring, kuwait

airfield management shift lead (amsl) Jobs in Kuwait

airfield management shift lead (amsl)

maintenance supervisor - armament Jobs in Kuwait

maintenance supervisor - armament

afcap v ocn/ln kuwait: escort (secret clearance) Jobs in Kuwait

afcap v ocn/ln kuwait: escort (secret clearance)

ah-64 aircraft mechanic am-2 (army aviation ah-64) - ali al salem, kuwait Jobs in Kuwait

ah-64 aircraft mechanic am-2 (army aviation ah-64) - ali al salem, kuwait

aircraft servicer

Amentum

<div><p>The Aircraft Servicer services aircraft, performing any combination of the following tasks, directs incoming and outgoing aircraft near terminal or flight line parking area to assist pilot's maneuvering of the aircraft on ground, using hand or light signals or drives light truck with guiding sign, and secures aircraft in parking position with aircraft wheel chocks, installs landing gear and safing pins.</p><div><b><br>
Principal Accountabilities
</b><br>
(Typical duties include the following, although specific duties vary by assignment or contract)<br>
<ul><li>Operates service vehicles to replenish water, waste system chemicals (at select locations).</li><li>Assists with refueling, defueling and towing aircraft (tow vehicle operator).</li><li>Operates ground support equipment such as electrical power carts, engine starting carts, air conditioning carts, nitrogen carts, oil and hydraulic carts for serving aircraft.</li><li>Examines tires for specified air pressure and condition.</li><li>Positions boarding platforms to unload or load aircraft passengers (stair case truck).</li><li>De-ice aircraft wings and assemblies (select locations).</li><li>Extract engine oil samples when required and provide to NDI for analysis.</li><li>Coordinates via land mobile radio with air traffic control for follow me and towing of aircraft to designated parking spots.</li><li>Retrieve Drag chutes and return to owning maintenance unit.</li><li>Coordinates with base supply in ordering parts for aircraft.</li><li>Perform other duties as assigned.</li></ul></div><div><b><br>
Knowledge &amp; Skills
</b><br>
<ul><li>Ability to communicate effectively both orally and in writing</li><li>Knowledge of safety and security regulations, practices, and procedures</li><li>Additional knowledge/skill requirements may be required by assignment or contract</li></ul></div><div><b><br>
Experience &amp; Education
</b><br>
<ul><li>Federal Aviation Administration (FAA) airframe / Power plant license or DD 214 with documentation reflecting aircraft maintenance experience.</li><li>High school diploma or equivalent</li><li>Additional experience/education may be required by assignment or contract</li></ul></div><p></p><div><b>
Physical Requirements/Working Environment
</b><br>
<ul><li>Living and working conditions at assignment location could be remote and uncomfortable</li><li>Long hours, exposure to weather, dust, and hazardous/harsh conditions</li><li>Personnel should be aware of moving on short notice and under adverse condition</li></ul></div><ul><li>Must be able to obtain and maintain a Secret Clearance; note: US Citizenship is required to obtain a Secret Clearance</li></ul><p><b><br>
Travel</b></p><ul><li>Ability to travel domestically and internationally</li></ul><p></p><p><br>
Amentum is proud to be an Equal Opportunity Employer. Our hiring practices provide equal opportunity for employment without regard to race, sex, sexual orientation, pregnancy (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, ancestry, United States military or veteran status, color, religion, creed, marital or domestic partner status, medical condition, genetic information, national origin, citizenship status, low-income status, or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state, or local law. Learn more about your rights under Federal laws and supplemental language at Labor Laws Posters.</p></div><br /> <div id='job-id'>Job Id: LGdgEjWMFr3TZRWALwoWIjVs9APuy8/zxIwmncF+iJ0ui4aMEHzgG60CspfFJTFY7T5D9mwnAtU8d3t65Tvqt/9zWyJrGFrmJqUFNrLiex5Ifrd3VgJQQViyi1c7R/SH/B8aLdiHVyhpSlt39QnelAUH5o3ZRG2vtSSCA4gpRld4g0SbsoHvN1Qcmx7ewByzsRbDSV8f7bsiZD6CrttswkRB5Pd5+A==</div>

Aircraft Servicer

<div></div><div><div><div><div><div><ul><div>R0137946
</div> <div></div><div>On Site
</div> </ul></div><div></div><div><ul><div>Kuwait City, Al Asimah Governate, Kuwait
</div> </ul></div><div></div><div><ul><div>Full time
</div>
</ul></div></div><p></p><div><p>The <b>Army Aviation AH-64 Aircraft Mechanic AM-2</b> performs the full range of military tactical aircraft maintenance and maintains repairs and troubleshoots malfunctions in aircraft structure, landing gear, flight surfaces and controls, anti-icing, pneudraulic, engines, auxiliary power unit, and ventilation and heating systems.</p><div>
<ul>
<li><p>A Minimum of Three (3) years aviation maintenance experience within the past recent Five (5) years on the <b>AH-64 </b>aircraft assigned<b> </b>is Required.</p></li>
<li><p><b>
OR </b>with a Valid <b>FAA A&amp;P</b> Certificate- Two (2) years of aviation maintenance experience, three (3) years of Rotary wing aircraft experience with Two (2) years of experience within the past recent Five (5) years on the <b>AH-64</b> aircraft assigned is Required.</p></li>
<li><p><b>
U.S. Passport</b> is Required. <b>US Citizenship is Required</b> to obtain the Security Clearance and for facility credentials/authorization at the work location.</p></li>
<li><p>
Remove and install aircraft subsystem assemblies and components such as engines, rotors, transmissions, mechanical flight controls and their components.</p></li>
<li><p>
Service and lubricate aircraft and subsystems.</p></li>
<li><p>
Safely prepare aircraft for inspections and maintenance checks and services.</p></li>
<li><p>
Perform scheduled inspections and assist in performing special inspections.</p></li>
<li><p>
Perform limited maintenance operational checks and diagnoses and troubleshoots aircraft systems using special tools and test equipment as required.</p></li>
<li><p>
Use and perform operator maintenance on tools, special tools and aircraft ground support equipment.</p></li>
<li><p>
Apply comprehensive technical expertise to solve moderate to complex problems by interpreting technical documentation such as aircraft Technical Manuals, Maintenance Information and Action Messages and all technical guidance provided through government official representatives.</p></li>
<li><p>
Maintain and repair aircraft components including but not limited to flight controls, engines, hydraulics, pneumatics, fuel systems, and mechanical components.</p></li>
<li><p>
Apply technical knowledge of airframe and power plant systems in determining equipment malfunctions and use required expertise in restoring equipment condition and or operation.</p></li>
<li><p>
Participate in maintenance test flights and operation checks as required.</p></li>
<li><p>
Perform other duties as requested.</p></li>
</ul>
<p></p><p><b>Minimum Requirements:
</b></p><ul><li><p>Completion of high school or equivalent is required.</p></li>
<li><p>
U.S. military technical school or a specialized training course is desired, certification of education level is required.</p></li>
<li><p>
A Minimum of Three (3) years aviation maintenance experience within the past recent Five (5) years on the <b>AH-64 </b>aircraft assigned<b> </b>is Required.</p></li>
<li><p><b>
OR </b>with a <b>Valid FAA A&amp;P </b>Certificate- Two (2) years of aviation maintenance experience, three (3) years of Rotary wing aircraft experience with Two (2) years of experience within the past recent Five (5) years on the <b>AH-64</b> aircraft assigned is Required.</p></li>
<li><p>
A Valid <b>U.S. Passport</b> <b>is Required</b>, with 3 years of validity remaining before expiration at the time of hire with minimum 6 blank pages and be able to travel internationally.</p></li>
<li><p>
Able to pass and clear CENTCOM MOD 17 Army Medical for deployment.</p></li>
<li><p>
Ability to obtain PCC for Kuwait Visa.</p></li>
</ul>
<p></p><p><b>Security Clearance Requirements:</b></p>
<ul><li><p>
Must be able to obtain and maintain a US Govt Security Clearance <b>(NAC-I T1)</b> Public Trust. <b>US Citizenship is required</b> to obtain a Security Clearance, and for facility credentials/authorization to work at this work location.</p></li></ul>
<p></p>
<p><b>Knowledge &amp; Skills
</b></p><ul><li><p>Thorough knowledge of aircraft mechanical component troubleshooting, repair procedures and replacement of parts.</p></li>
<li><p>
Broad knowledge of aircraft sheet metal/structural modifications and repair.</p></li>
<li><p>
Basic knowledge of electrical theory and a thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, sheet metal brakes and sheers.</p></li>
<li><p>
Working knowledge of technical publications and Logistics Information Systems.</p></li>
<li><p>
Able to prioritize workloads to maintain schedules on assigned projects and may be required to lead teams through more complex aircraft relevant tasks.</p></li>
<li><p>
Participate in maintenance test flights and operation checks as required.</p></li>
<li><p>
The incumbent receives technical guidance, as required, from supervisor or higher-level technician, will occasionally be required to lead teams through more complex aircraft relevant tasks, and may be required to make entries in aircraft logs and records.</p></li>
</ul>
<p></p><p><b>Physical Requirements/Working Environment</b></p>
<ul>
<li><p>Must be able to walk and stand on level and/or inclined surfaces for extended periods throughout the day.</p></li>
<li><p>
Must be able to climb stairs, ramps, ladders, and work stands.</p></li>
<li><p>
Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee and reach above/below shoulders.</p></li>
<li><p>
May be required to lift heavy objects whose weight may exceed 50 pounds.</p></li>
<li><p>
Must be able to type using a standard keyboard to communicate through e-mail and various software applications.</p></li>
<li><p>
Will handle dirty parts and lubricants.</p></li>
<li><p>
Will be required to wear proper Personal Protective Equipment (PPE).</p></li>
<li><p>
Must be able to pass a Respirator Physical and Fit Test qualification.</p></li>
<li><p>
May be required to operate power vehicles, machinery, hand tools, ground support equipment, fork lift, etc.</p></li>
<li><p>
Must be able to lift/push/pull minimum of 50 pounds.</p></li>
<li><p>
May work in maintenance shop or outside.
</p></li><li><p>Must be able to work in a shop where the environment is drafty, noisy, and dirty.</p></li>
<li><p>
May be exposed to extreme noise from operating equipment.</p></li>
<li><p>
May be exposed to electrical shock hazards or work near moving mechanical parts or vehicles.</p></li>
<li><p>
May be expected to work in austere environments and all weather conditions.</p></li></ul></div></div></div></div></div><p></p><br /> <div id='job-id'>Job Id: QdQW26vzEPWEw0Lcbblsk2i/DZ4t6n4gARhy+2E1pudl0eOiEEXeX0DhA0pej9FxruohLI5PCfuxV3guyWU0mRyyL89qgv/BwfyuMR25kqWneR8y7gqQ20UyQ2fW6NeIf5bdq4TMX+nFBPRA3d2wx/6TffI7CQoNtrvv+gnzlLGGqgZEJdE1hI4Qj/SLJKUYCz2AmxaNvg==</div>

AH-64 Aircraft Mechanic AM-2 (Army Aviation AH-64) - Ali Al Salem, Kuwait

<div>
 <strong>
  The UH-60
 </strong>
 <strong>
  Aircraft Mechanic AM-2 (UH-60 Army Aviation)
 </strong>
 performs the full range of military tactical aircraft maintenance and maintains repairs and troubleshoots malfunctions in aircraft structure, landing gear, flight surfaces and controls, anti-icing, pneudraulic, engines, auxiliary power unit, and ventilation and heating systems.
 <br/>
 <br/>
 <ul>
  <li>
   With a valid (FAA) A&amp;P certificate (Preferred), Two (2) years of aviation maintenance experience, Two (2) years rotary wing aircraft experience, and Two (2) years on the assigned MDS UH-60 aircraft is Required. (See below for requirements without A&amp;P).
  </li>
  <li>
   Valid US Passport and US Citizenship is Required to obtain the NAC-I clearance and for facility access.
  </li>
  <li>
   Remove and install aircraft subsystem assemblies and components such as engines, rotors, transmissions, mechanical flight controls and their components.
  </li>
  <li>
   Safely prepare aircraft for inspections and maintenance checks and services.
  </li>
  <li>
   Perform scheduled inspections and assist in performing special inspections.
  </li>
  <li>
   Perform limited maintenance operational checks and diagnoses and troubleshoots aircraft systems using special tools and test equipment as required.
  </li>
  <li>
   Apply comprehensive technical expertise to solve moderate to complex problems by interpreting technical documentation such as aircraft Technical Manuals, Maintenance Information and Action Messages and all technical guidance provided through government official representatives.
  </li>
  <li>
   Maintain and repair aircraft components including but not limited to flight controls, engines, hydraulics, pneumatics, fuel systems, and mechanical components.
  </li>
  <li>
   Apply technical knowledge of airframe and power plant systems in determining equipment malfunctions and use required expertise in restoring equipment condition and or operation.
  </li>
  <li>
   Participate in maintenance test flights and operation checks as required.
  </li>
  <li>
   Perform other duties as requested.
   <br/>
   <br/>
  </li>
 </ul>
 <strong>
  Minimum Requirements
 </strong>
 :
 <br/>
 <br/>
 <ul>
  <li>
   High School Diploma or Equivalent is required.
  </li>
  <li>
   With a valid (FAA) A&amp;P certificate, Two (2) years of aviation maintenance experience, Two (2) years rotary wing aircraft experience, and Two (2) years on the assigned MDS UH-60 aircraft is Required.
  </li>
  <li>
   All experience must be within the Five (5) most recent years.
  </li>
  <li>
   Without a valid (FAA) A&amp;P certificate; Must have Three (3) years aviation maintenance experience, Three (3) years of rotary wing aircraft experience, and a minimum of Three (3) years on the assigned UH-60 Mission Design Series (MDS) is Required.
  </li>
  <li>
   All experience must be within the Five (5) most recent years.
  </li>
  <li>
   U.S. Military Technical school or specialized training course is desired, certification of education level is required.
  </li>
  <li>
   A Valid US Passport is Required for deployment to Kuwait. The Passport must have 3 years remaining before expiring, and 6 Blank pages available at the time of hire and deployment.
  </li>
  <li>
   Must be able to obtain and maintain facility Public Trust NAC-I. Note: US Citizenship is required for facility Public Trust NAC-I at this work location. Must be able to pass and clear CENTCOM Army MOD Physical and requirements for deployment (will attend CRC/ DIDC Training).
  </li>
  <li>
   Must be able to obtain Kuwait PCC clearance and Visa
   <br/>
   <br/>
  </li>
 </ul>
 <strong>
  Additional and Preferred Qualifications
 </strong>
 :
 <br/>
 <br/>
 <ul>
  <li>
   Thorough knowledge of aircraft mechanical component troubleshooting, repair procedures and replacement of parts.
  </li>
  <li>
   Broad knowledge of aircraft sheet metal/structural modifications and repair.
  </li>
  <li>
   Basic knowledge of electrical theory and a thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, sheet metal brakes and sheers.
  </li>
  <li>
   Working knowledge of technical publications and Logistics Information Systems.
  </li>
  <li>
   Able to prioritize workloads to maintain schedules on assigned projects and may be required to lead teams through more complex aircraft relevant tasks.
  </li>
  <li>
   Participate in maintenance test flights and operation checks as required.
  </li>
  <li>
   Possess the level of experience to inspect all required aeronautical type maintenance to be performed by Mechanics.
  </li>
  <li>
   The incumbent receives technical guidance, as required, from supervisor or higher-level technician, will occasionally be required to lead teams through more complex aircraft relevant tasks, and may be required to make entries in aircraft logs and records.
   <br/>
   <br/>
  </li>
 </ul>
 <strong>
  Physical Requirements/Working Environment
  <br/>
  <br/>
 </strong>
 <ul>
  <li>
   Must be able to walk and stand on level and/or inclined surfaces for extended periods throughout the day.
  </li>
  <li>
   Must be able to climb stairs, ramps, ladders, and work stands.
  </li>
  <li>
   Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee and reach above/below shoulders.
  </li>
  <li>
   May be required to lift heavy objects whose weight may exceed 50 pounds.
  </li>
  <li>
   Must be able to type using a standard keyboard to communicate through e-mail and various software applications.
  </li>
  <li>
   Will handle dirty parts and lubricants.
  </li>
  <li>
   Will be required to wear proper Personal Protective Equipment (PPE).
  </li>
  <li>
   Must be able to pass a Respirator Physical and Fit Test qualification.
  </li>
  <li>
   May be required to operate power vehicles, machinery, hand tools, ground support equipment, forklift, etc.
  </li>
  <li>
   Must be able to lift/push/pull minimum of 50 pounds.
  </li>
  <li>
   May work in maintenance shop or outside.
  </li>
  <li>
   Must be able to work in a shop where the environment is drafty, noisy, and dirty.
  </li>
  <li>
   May be exposed to extreme noise from operating equipment.
  </li>
  <li>
   May be exposed to electrical shock hazards or work near moving mechanical parts or vehicles.
  </li>
  <li>
   May be expected to work in austere environments and all-weather conditions
   <br/>
   <br/>
  </li>
 </ul>
 Amentum is proud to be an Equal Opportunity Employer. Our hiring practices provide equal opportunity for employment without regard to race, sex, sexual orientation, pregnancy (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, ancestry, United States military or veteran status, color, religion, creed, marital or domestic partner status, medical condition, genetic information, national origin, citizenship status, low-income status, or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state, or local law. Learn more about your rights under Federal laws and supplemental language at Labor Laws Posters.
</div>
<br /> <div id='job-id'>Job Id: WYVOAGUiG/Tq9m03sB3ySoXr2WQundZIc1YgmtbBqQBBYO+7Av8jqyQhhaHaMsJ7SxctEizAApiqfI+UWJPr2O1wdmepYwLePJpfpYPObJ9HpjNMkAeeGGrUVvlL3xEnfn2A6/pJEOB6ceX2g/XNNSuNea4UXZGJPVNnBjwUi36wBxKmEy7Z4Yhug0rg+Y+yEHHdX7pnTR4o8p4R3EJgrFntmJUB06J8EaySe74u8/L14rGSy7ZyZgw0Q2mnJjMrIzp0T1RXouE=</div>

Aircraft Mechanic AM-2 (UH-60 Army Aviation) - Camp Buehring, Kuwait

<div><p><b>The UH-60</b> <b>Aircraft Mechanic AM-2 (UH-60 Army Aviation)</b> performs the full range of military tactical aircraft maintenance and maintains repairs and troubleshoots malfunctions in aircraft structure, landing gear, flight surfaces and controls, anti-icing, pneudraulic, engines, auxiliary power unit, and ventilation and heating systems.</p><ul>
<li><p>
With a valid (FAA) A&amp;P certificate (Preferred), Two (2) years of aviation maintenance experience, Two (2) years rotary wing aircraft experience, and Two (2) years on the assigned MDS <b>UH-60</b> aircraft is Required. (See below for requirements without A&amp;P).</p></li>
<li><p><b>
Valid US Passport and US Citizenship is Required</b> to obtain the NAC-I clearance and for facility access.</p></li>
<li><p>
Remove and install aircraft subsystem assemblies and components such as engines, rotors, transmissions, mechanical flight controls and their components.</p></li>
<li><p>
Safely prepare aircraft for inspections and maintenance checks and services.</p></li>
<li><p>
Perform scheduled inspections and assist in performing special inspections.</p></li>
<li><p>
Perform limited maintenance operational checks and diagnoses and troubleshoots aircraft systems using special tools and test equipment as required.</p></li>
<li><p>
Apply comprehensive technical expertise to solve moderate to complex problems by interpreting technical documentation such as aircraft Technical Manuals, Maintenance Information and Action Messages and all technical guidance provided through government official representatives.</p></li>
<li><p>
Maintain and repair aircraft components including but not limited to flight controls, engines, hydraulics, pneumatics, fuel systems, and mechanical components.</p></li>
<li><p>
Apply technical knowledge of airframe and power plant systems in determining equipment malfunctions and use required expertise in restoring equipment condition and or operation.</p></li>
<li><p>
Participate in maintenance test flights and operation checks as required.</p></li>
<li><p>
Perform other duties as requested.</p></li>
</ul><p></p><p><b>
Minimum Requirements</b>:</p><ul>
<li><p>
High School Diploma or Equivalent is required.</p></li>
<li><p>
With a valid (FAA) A&amp;P certificate, Two (2) years of aviation maintenance experience, Two (2) years rotary wing aircraft experience, and Two (2) years on the assigned MDS <b>UH-60</b> aircraft is Required.</p></li>
<li><p>
All experience must be within the Five (5) most recent years.</p></li>
<li><p>
Without a valid (FAA) A&amp;P certificate; Must have Three (3) years aviation maintenance experience, Three (3) years of rotary wing aircraft<b> </b>experience, and a minimum of Three (3) years on the assigned<b> UH-60</b> Mission Design Series (MDS) is Required.</p></li>
<li><p>
All experience must be within the Five (5) most recent years.</p></li>
<li><p>
U.S. Military Technical school or specialized training course is desired, certification of education level is required.</p></li>
<li><p><b>
A Valid US Passport is Required</b> for deployment to Kuwait. The Passport must have 3 years remaining before expiring, and 6 Blank pages available at the time of hire and deployment.</p></li>
<li><p>
Must be able to obtain and maintain facility Public Trust NAC-I. <b>Note: </b>US Citizenship is required for facility Public Trust NAC-I at this work location.<br>
Must be able to pass and clear CENTCOM Army MOD Physical and requirements for deployment (will attend CRC/ DIDC Training).</p></li>
<li><p>
Must be able to obtain Kuwait PCC clearance and Visa</p></li>
</ul><p></p><p><b>
Additional and Preferred Qualifications</b>:</p><ul>
<li><p>
Thorough knowledge of aircraft mechanical component troubleshooting, repair procedures and replacement of parts.</p></li>
<li><p>
Broad knowledge of aircraft sheet metal/structural modifications and repair.</p></li>
<li><p>
Basic knowledge of electrical theory and a thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, sheet metal brakes and sheers.</p></li>
<li><p>
Working knowledge of technical publications and Logistics Information Systems.</p></li>
<li><p>
Able to prioritize workloads to maintain schedules on assigned projects and may be required to lead teams through more complex aircraft relevant tasks.</p></li>
<li><p>
Participate in maintenance test flights and operation checks as required.</p></li>
<li><p>
Possess the level of experience to inspect all required aeronautical type maintenance to be performed by Mechanics.</p></li>
<li><p>
The incumbent receives technical guidance, as required, from supervisor or higher-level technician, will occasionally be required to lead teams through more complex aircraft relevant tasks, and may be required to make entries in aircraft logs and records.</p></li>
</ul><p></p><p><b>
Physical Requirements/Working Environment</b></p><ul>
<li><p>
Must be able to walk and stand on level and/or inclined surfaces for extended periods throughout the day.</p></li>
<li><p>
Must be able to climb stairs, ramps, ladders, and work stands.</p></li>
<li><p>
Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee and reach above/below shoulders.</p></li>
<li><p>
May be required to lift heavy objects whose weight may exceed 50 pounds.</p></li>
<li><p>
Must be able to type using a standard keyboard to communicate through e-mail and various software applications.</p></li>
<li><p>
Will handle dirty parts and lubricants.</p></li>
<li><p>
Will be required to wear proper Personal Protective Equipment (PPE).</p></li>
<li><p>
Must be able to pass a Respirator Physical and Fit Test qualification.</p></li>
<li><p>
May be required to operate power vehicles, machinery, hand tools, ground support equipment, forklift, etc.</p></li>
<li><p>
Must be able to lift/push/pull minimum of 50 pounds.</p></li>
<li><p>
May work in maintenance shop or outside.</p></li>
<li><p>
Must be able to work in a shop where the environment is drafty, noisy, and dirty.</p></li>
<li><p>
May be exposed to extreme noise from operating equipment.</p></li>
<li><p>
May be exposed to electrical shock hazards or work near moving mechanical parts or vehicles.</p></li>
<li><p>
May be expected to work in austere environments and all-weather conditions</p></li></ul><p></p><p><br>
Amentum is proud to be an Equal Opportunity Employer. Our hiring practices provide equal opportunity for employment without regard to race, sex, sexual orientation, pregnancy (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, ancestry, United States military or veteran status, color, religion, creed, marital or domestic partner status, medical condition, genetic information, national origin, citizenship status, low-income status, or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state, or local law. Learn more about your rights under Federal laws and supplemental language at Labor Laws Posters.</p></div><br /> <div id='job-id'>Job Id: jgOixnpyN65hMh1avgcpqIjkP0VHqfT/EZDj97xbOHrhj+pdkGRLKQZBAi5OKM2eY9yDvGcHQ3Ok/x6xoBceQeNt7G7n1KOuUGLtZ9snvvquBDGBfiHbzOxZXEopJhuNlnr29oVb026g1XNfJrqQDCXy42tIYL1e5v1GxnggMUmDz91scitU53ofFXD8hvE5U+8IsMSIH8qut/Sb8mL+ZzM8j62rUxXojtVgpx/GcXUIjIIC388ooBE=</div>

Versar Global Solutions

<div>
 <strong>
  This Opportunity
  <br/>
  <br/>
 </strong>
 Perform all tasks associated with the safe and correct operation of the Air Terminal as directed by management, regulations, policies, Instructions and the Performance Work Statement.
 <br/>
 <br/>
 <strong>
  Your Impact
  <br/>
  <br/>
 </strong>
 <ul>
  <li>
   Operate GATES/GDSS systems as required.
  </li>
  <li>
   Assists with data base integrity by reviewing all required GATES reports when requested.
  </li>
  <li>
   Ensure cargo and baggage are properly handled utilizing the load plan lAW applicable instructions.
  </li>
  <li>
   Validate, select, stage and load aircraft IAW applicable guidance.
  </li>
  <li>
   Build-up/ break-down baggage/mix pallets, multi-pallet trains and loose cargo.
  </li>
  <li>
   Offload/ on load cargo on surface and air conveyance.
  </li>
  <li>
   Accurately weigh and record cargo and baggage.
  </li>
  <li>
   Ensure all Performance Work Statement (PWS) requirements are properly and accurately accomplished.
  </li>
  <li>
   Perform terminal inventories.
  </li>
  <li>
   Properly store and facilitate onward movement of all cargo.
  </li>
  <li>
   Coordinate timely cargo and mail pick-up/release.
  </li>
  <li>
   Reconfigure cargo to meet aircraft envelope.
  </li>
  <li>
   Accomplish manual procedures when systems are down.
  </li>
  <li>
   Escort trucks, buses, personnel and other surface conveyances.
  </li>
  <li>
   Ensure maximum aircraft utilization based upon available airlift and existing port backlogs.
  </li>
  <li>
   Facilitate on-time aircraft departures.
  </li>
  <li>
   Ensure all trash is removed from aircraft other than AMC Contracted Aircraft.
  </li>
  <li>
   Ensure water coolers, ice chests and freezer are stocked with water and ice for each shift.
  </li>
  <li>
   Ensure all vehicles are parked per the published vehicle parking plan.
  </li>
  <li>
   Perform Wing-Walker duties.
  </li>
  <li>
   Process cargo lAW applicable instructions.
  </li>
  <li>
   Operate K-loaders, forklifts, buses, tugs, vans or other required vehicles safely, inspect daily utilizing check lists and AFTO forms and ensure vehicles in need of repair or service are properly turned in to maintenance.
  </li>
  <li>
   Perform Cargo Processing, Special Handling, and Load Planning functions in accordance with AFI24-605, Volumes, DTR 4500-9 1Parts 2 and 3, and AFJMAN 24-204 and other applicable instructions.
  </li>
  <li>
   Perform Joint Inspections.
  </li>
  <li>
   Perform aircraft ground services IAW Air Force Occupational Safety and Health Standard (AFOSHSTD) 91-100, T.O. 00-25-172, AFI 11-218, and applicable aircraft T.O.&rsquo;s.
  </li>
  <li>
   Position, deposition, connect, disconnect to / from aircraft all ground support equipment to include 150 lb Halon Fire Bottles.
  </li>
  <li>
   Perform follow-me marshaling to include blocking, chocking, wingtip/tail clearance guard duties.
  </li>
  <li>
   Perform pushback and towing duties for all transiting aircraft.
  </li>
  <li>
   Wash AGE equipment as scheduled.
  </li>
  <li>
   Store and park AGE equipment per the published parking plan.
  </li>
  <li>
   Operate/inspect light carts positioned on aircraft parking locations.
  </li>
  <li>
   Perform supplemental duties in Aircraft Services or other work centers as required by Supervisor, Lead and Management.
   <br/>
   <br/>
  </li>
 </ul>
 <strong>
  Who You Are
  <br/>
  <br/>
 </strong>
 <strong>
  Required Qualifications
  <br/>
  <br/>
 </strong>
 <ul>
  <li>
   Experience in Air Terminal Ground Handling Services is preferred.
  </li>
  <li>
   Must have computer skills and be able to operate a variety of computer programs. Must be detail oriented, motivated and drive to perform at a high level.
  </li>
  <li>
   Must be able to comprehend English to include reading and writing.
  </li>
  <li>
   Must maintain a valid driver&rsquo;s license.
  </li>
  <li>
   You will be required to maintain a valid passport.
  </li>
  <li>
   You will be required to maintain authorization for a CAC card.
   <br/>
   <br/>
  </li>
 </ul>
 <strong>
  Preferred Qualifications
  <br/>
  <br/>
 </strong>
 <ul>
  <li>
   Great interpersonal skills.
  </li>
  <li>
   Customer service oriented.
  </li>
  <li>
   Team player.
  </li>
  <li>
   Ability to multi-task.
   <br/>
   <br/>
  </li>
 </ul>
 <strong>
  About Versar Global Solutions
  <br/>
  <br/>
 </strong>
 Headquartered in Washington, DC, Versar Global Solutions provides full mission lifecycle solutions for challenges faced by our government and commercial customers in the natural, built, and digital environments. With nearly 2,000 team members around the world, and a rich legacy spanning more than 70 years, Versar Global Solutions delivers a broad array of planning, analysis and risk management solutions, project and program management, operations and maintenance services, and information technology applications for environmental management and remediation projects, mission critical facilities and installations, and in support of readiness and contingency operations.
 <br/>
 <br/>
 Versar Global Solutions is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, or national origin.
 <br/>
 <br/>
</div>
<br /> <div id='job-id'>Job Id: UxoxhW4GQFX4eI0lvDAh2xr7CVKRPCrVI1Tvpl5PnKqAkIBFoBxI4EVvCT3MoTNvr7dWvhWozeniWoNtNaiJaDtxQQKhLMlXzs7OBjfrjPj3+S3P5pfGrl6EPvygB9uyZMqdp6dSVWdt48YM5pKlJvgwkcZmnmdVCkJmreeATgN7wPe4JTiRfTLA9S0SoF/gkSZRXXgGtpJ9+qiGORTKVz3ayML0M7TOWZdptIj3AW85w4zHIXZnvNN87AAp+b4cwBuo7kiWHxT3Aphr1FvK5g==</div>

Air Freight Specialist

<div></div><div><div><div><div><div><ul><div>R0123869
</div> <div></div><div>On Site
</div> </ul></div><div></div><div><ul><div>FPO, Al Jahra, Kuwait
</div> </ul></div><div></div><div><ul><div>Full time
</div></ul></div></div><p></p><div><div><b>The </b><b>AH-64 Aircraft Mechanic III </b>performs the full range of military tactical aircraft maintenance and maintains repairs and modifies aircraft structures and structural components of complex to extreme difficulty.</div><div><div><div><div>
<div><div><div><div><ul>
<li><p>Maintain and repair aircraft components including but not limited to flight controls, engines, hydraulics, pneumatics, fuel systems and mechanical components.</p></li>
<li><p>
Apply technical knowledge of airframe and power plant systems in determining equipment malfunctions and applies technical expertise in restoring equipment condition and operation.</p></li>
<li><p>
Apply professional technical expertise and guidance to solve complex problems by interpreting technical data such as blueprints or manufactures' manuals.</p></li>
<li><p>
Make entries in aircraft logs and records, and responsible for providing guidance and technical expertise to lower level technicians throughout all aircraft modifications and/or maintenance efforts.</p></li>
<li><p>
Plan, conduct, and supervise aircraft technical inspections.</p></li>
<li><p>
Compute basic weight and balance records.</p></li>
<li><p>
Participate in maintenance test flights and operation checks as required.</p></li>
<li><p>
Ensure compliance with aircraft configuration control, Army oil analysis Program and test measuring diagnostic equipment calibration.</p></li>
<li><p>
Provide lower level technicians guidance in aircraft repair and technical inspection techniques and procedures according to directives, technical manuals, work standards and operational policies.</p></li>
<li><p>
Prepare evaluations, special reports, and records pertaining to aircraft maintenance repair and related activities.</p></li>
<li><p>
Perform other duties as requested.</p></li>
</ul></div></div></div></div>
<p></p><p><b>Minimum Requirements:</b></p>
<ul>
<li><p>Completion of high school or equivalent required.
</p></li><li><p>U.S. military technical school or specialized training course is desired, certification of education level is required.</p></li>
<li><p>
Five (5) or more year&rsquo;s aviation maintenance experience within the past ten (10) years on that mission design series<b> AH-64 </b>(MDS).</p></li>
<li><p>
Experience in maintenance, modification and repair of tactical aircraft systems of the type being serviced and their associated components.</p></li>
<li><p>
Valid FAA Airframe &amp; Power plant (A&amp;P) License for mechanics and Sheetmetal is preferred.</p></li>
<li><p>
Must be able to obtain and maintain facility Public Trust NAC-I. Note: <b>US Citizenship is required</b> for facility Public Trust NAC-I at this work location.</p></li>
<li><p>
Must be in possession of a Passport with 3 years of validity remaining at the time of hire with 6 blank pages and be able to travel internationally.</p></li>
<li><p>
Able to clear CENTCOM MOD17 Medical for deployment.</p></li>
<li><p>
Must be able to obtain Kuwait visa.</p></li>
</ul>
<p></p><p><b>Knowledge &amp; Skills</b></p>
<ul>
<li><p>Thorough knowledge of aircraft mechanical component troubleshooting, repair procedures and replacement of parts.</p></li>
<li><p>
Broad knowledge of aircraft sheet metal/structural modifications and repair.</p></li>
<li><p>
Basic knowledge of electrical theory and a thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, sheet metal brakes and sheers.</p></li>
<li><p>
Working knowledge of technical publications and Logistics Information Systems.</p></li>
<li><p>
Able to prioritize workloads to maintain schedules on assigned projects and is required to lead teams through more complex aircraft relevant tasks.</p></li>
<li><p>
Participate in maintenance test flights and operation checks as required.</p></li>
<li><p>
Possess the level of experience to inspect all required aeronautical type maintenance to be performed by Mechanics.</p></li>
<li><p>
The incumbent receives technical guidance, as required, from supervisor or higher-level technician, will occasionally be required to lead teams through more complex aircraft relevant tasks, and may be required to make entries in aircraft logs and records.</p></li></ul><br>
<p></p>
<p>
<b>Physical Requirements/Working Environment</b></p>
<ul>
<li><p>Must be able to walk and stand on level and/or inclined surfaces for extended periods throughout the day.</p></li>
<li><p>
Must be able to climb stairs, ramps, ladders, and work stands.</p></li>
<li><p>
Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee and reach above/below shoulders.</p></li>
<li><p>
May be required to lift heavy objects whose weight may exceed 50 pounds.</p></li>
<li><p>
Must be able to type using a standard keyboard to communicate through e-mail and various software applications.</p></li>
<li><p>
Will handle dirty parts and lubricants.</p></li>
<li><p>
Will be required to wear proper Personal Protective Equipment (PPE).</p></li>
<li><p>
Must be able to pass a Respirator Physical and Fit Test qualification.</p></li>
<li><p>
May be required to operate power vehicles, machinery, hand tools, ground support equipment, fork lift, etc.
</p></li><li><p>Must be able to lift/push/pull minimum of 50 pounds.</p></li>
<li><p>
May work in maintenance shop or outside.</p></li>
<li><p>
Must be able to work in a shop where the environment is drafty, noisy, and dirty.</p></li>
<li><p>
May be exposed to extreme noise from operating equipment.</p></li>
<li><p>
May be exposed to electrical shock hazards or work near moving mechanical parts or vehicles.</p></li></ul></div></div></div></div></div></div></div></div><p></p><br /> <div id='job-id'>Job Id: ZyYkupkfPsmE82ILbMapITjTl8jbgzvqXidjjJa8ZRIqpASftLjK/jynEIPeQs+yfdYQ+5a7Rc3MWl+2nLweylq5iIoY6sxcv1B+P0Tg4wiTgka6PO8GDzQfkpuE1QHVRZHhW0GJwHL5mAttCsBqIa9lyc23EKFMmejV/vnIrg8qUto96kVqe4t/a8SeOlAGQds9sOqeaPEmg9TBd93oWTb7e12H2TU=</div>

Aircraft Mechanic III (AH64) - Ali Al Salem, Kuwait

<div></div><div><div><div><div><div><ul><div>R0139368
</div> <div></div><div>On Site
</div> </ul></div><div></div><div><ul><div>Kuwait City, Al Asimah Governate, Kuwait
</div> </ul></div><div></div><div><ul><div>Full time
</div>
</ul></div></div><p></p><div><p>The <b>Aircraft Mechanic II (Sheetmetal)</b> maintains, modifies, and integrates the aircraft structure and its parts.</p><ul>
<li><p>
Maintain, modify, and install the various components of aircraft sheet metal.</p></li>
<li><p>
Repair, rework, install and fabricate the complex aircraft structural assemblies, both internal and external.</p></li>
<li><p>
Lay out plans, fabrication, and installation models for modifications.</p></li>
<li><p>
Balance rotary-wing aircraft controls and apply primers/paints on aircraft surfaces.</p></li>
<li><p>
Fabricate structural parts using metal-forming techniques and fiberglass materials</p></li>
<li><p>
Perform checks; carry out inspections and removal of components.</p></li>
<li><p>
Study technical manuals, blueprints, and engineering drawings.</p></li>
<li><p>
Provide assistance to aircraft technicians and mechanics on various tasks.</p></li>
<li><p>
Remove and disassemble defective parts of the aircraft.</p></li>
<li><p>
Perform final checks on assembly and installation of parts that were replaced.</p></li>
<li><p>
Maintain and keep track of all the maintenance records.</p></li>
<li><p>
Adhere to company policies and safety programs.</p></li>
<li><p>
Maintain the supplies and perform preventive maintenance.</p></li>
</ul><p></p><p><b>
Minimum Requirements</b></p><ul>
<li><p>
High School Diploma or equivalent.</p></li>
<li><p>
U.S. military technical school or specialized training course is desired, certification of education level is required.</p></li>
<li><p>
Aircraft/Blade painting experience preferred.</p></li>
<li><p>
Three (3) or more years aviation maintenance experience within the past Five (5) years on the mission design series (MDS) <b>UH60, AH64, CH47</b>.</p></li>
<li><p>
Or A&amp;P license and Two (2) years aviation maintenance experience within the past Five (5) years on the mission design series <b>UH60, AH64, CH47</b> (MDS).</p></li>
<li><p>
Must be in possession of a U.S. Passport and be able to travel internationally with minimum 6 blank pages and 1.5 plus year validity on expiration date of passport..</p></li>
<li><p>
Must be able to obtain and maintain facility Public Trust NAC-I. Note: <b>US Citizenship</b> is required for facility Public Trust NAC-I at this work location.</p></li>
<li><p>
Must be able to pass CENTCOM medical requirements.</p></li>
<li><p>
Must be able to obtain Kuwait PCC &amp; Visa.</p></li>
</ul><p></p><p><b>
Knowledge &amp; Skills
</b></p><ul><li><p>Thorough knowledge of aircraft sheet metal/structural modifications and repair.</p></li>
<li><p>
Basic knowledge of aircraft mechanical component troubleshooting, repair procedures and replacement of parts.</p></li>
<li><p>
Basic knowledge of electrical theory and a thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, sheet metal brakes and sheers.</p></li>
<li><p>
Working knowledge of technical publications and Logistics Information Systems.</p></li>
<li><p>
Able to prioritize workloads to maintain schedules on assigned projects and is required to lead teams through more complex aircraft relevant tasks.</p></li>
<li><p>
Possess the level of experience to inspect all required aeronautical type maintenance to be performed by Mechanics.</p></li>
<li><p>
The incumbent receives technical guidance, as required, from supervisor or higher-level technician, will occasionally be required to lead teams through more complex aircraft relevant tasks, and may be required to make entries in aircraft logs and records.</p></li>
</ul><p></p><p>
 <b>Physical Requirements/Working Environment</b></p><ul>
<li><p>
Must be able to walk and stand on level and/or inclined surfaces for extended periods throughout the day.</p></li>
<li><p>
Must be able to climb stairs, ramps, ladders, and work stands.</p></li>
<li><p>
Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee and reach above/below shoulders.</p></li>
<li><p>
May be required to lift heavy objects whose weight may exceed 50 pounds.</p></li>
<li><p>
Must be able to type using a standard keyboard to communicate through e-mail and various software applications.</p></li>
<li><p>
Will handle dirty parts and lubricants.</p></li>
<li><p>
Will be required to wear proper Personal Protective Equipment (PPE).</p></li>
<li><p>
Must be able to pass a Respirator Physical and Fit Test qualification.</p></li>
<li><p>
May be required to operate power vehicles, machinery, hand tools, ground support equipment, forklift, etc.</p></li>
<li><p>
Must be able to lift/push/pull minimum of 50 pounds.</p></li>
<li><p>
May work in maintenance shop or outside.</p></li>
<li><p>
Must be able to work in a shop where the environment is drafty, noisy, and dirty.</p></li>
<li><p>
May be exposed to extreme noise from operating equipment.</p></li>
<li><p>
May be exposed to electrical shock hazards or work near moving mechanical parts or vehicles.</p></li>
<li><p>
May be expected to work in austere environments and all-weather conditions</p></li></ul></div></div></div></div><p></p><br /> <div id='job-id'>Job Id: 4sKwyxVrk+JZA/pSNDpg7y4axSi/6n4nyxG8s5xo+7P5z5LdN8Cc3s3XuZpgJ+jLViul2bR0lYHbPbPQkXYH5Bqxom0vKAQ0JLOMUXe0kOjAFWWx6MzTJryWXOBuFgAyfAPCrdv70QD4oQl3U8LjYeDoFS37A21/wzm4ks3mpo7EWwv7TQGBx5qTp2iAicOLq4eqHr6F</div>

Aircraft Mechanic II (Sheetmetal) - Buehring, Kuwait

Explore 18+ Aircraft servicer in Kuwait this August. Find roles across top companies and apply now to boost your career.

18 aircraft servicer jobs IN Kuwait

Aircraft Servicer

AH-64 Aircraft Mechanic AM-2 (Army Aviation AH-64) - Ali Al Salem, Kuwait

Aircraft Mechanic AM-2 (UH-60 Army Aviation) - Camp Buehring, Kuwait

Aircraft Mechanic AM-2 (UH-60 Army Aviation) - Camp Buehring, Kuwait

Air Freight Specialist

Aircraft Mechanic III (AH64) - Ali Al Salem, Kuwait

Aircraft Mechanic II (Sheetmetal) - Buehring, Kuwait