sales executive Jobs in Charge Female Jobs In Charge Female Jobs In Karachi

sales executive

sales engineer Jobs in Charge Female Jobs In Charge Female Jobs In Karachi

sales engineer

technical support engineer Jobs in Charge Female Jobs In Charge Female Jobs In Karachi

technical support engineer

ai engineer Jobs in Charge Female Jobs In Charge Female Jobs In Karachi

ai engineer

area sales manager Jobs in Charge Female Jobs In Charge Female Jobs In Karachi

area sales manager

application engineer sales

Synergy Solutions

Job Objective:The Application Engineer has been responsible for technical aspects of the project and final submission to the Client. S/he gets involve in developing technical feasibility of the project, including the load parameter analysis, site conditions, the project costing both in terms of commercial and technical aspects of the project.Job Duties/Tasks/ Responsibilities:&middot; Conduct Electrical Load analysis along with calculation to identify the size and rating of Genset Engine.&middot; Conduct Site Survey to collect the data that is required for designing and estimating the cost of the Project.&middot; Provide guidance to the drafting team to produce accurate E-SLD drawing, and Genset Engine placement drawing.&middot; Prepare complete proposal and then submit it to the potential client.&middot; Work on different tender&rsquo;s enquiries, consultant enquiries, and direct client enquiries.&middot; Coordinate with internal departments Department for project costing.&middot; Generate RFQ to suppliers/vendors for project estimation, and compare it technically and commercially.&middot; Coordinate and monitor on time delivery of all the orders.&middot; Provide technical support in pre-order and post-order queries to the sales team.&middot; Participate in project meeting for technical support with sales team.&middot; Provide assistance to Project team for technical queries.&middot; Provide support in FAT of equipment by the Clients of Synergy Corporation.Perform the assigned task as and when required by the management.Knowledge, Skill &amp; Ability:Good Communication and Interpersonal Skills, Good Presentation Skills, Strategic Thinking, Problem-Solving Skills, Technical skillsEducation:BE / BCIT / BS (Electrical / Electronic Engineering)Experience:1-3 yearsComputer Skill:Excellent Computer Skills including MS Office, Email, Use of Analytical Tools, etc.Job Type: Full-timePay: Rs75,000.00 - Rs120,000.00 per monthApplication Question(s):<ul><li>Kindly share your expected salary for the said position.</li></ul>Location:<ul><li>Karachi (Preferred)</li></ul>Work Location: In person

Application Engineer - Sales

Novatek Pakistan

<ul><li>Position: Biomedical Engineer</li></ul>Requirements:<ul><li>PEC registered Biomedical Engineer</li><li>Strong technical knowledge and problem-solving skills.</li><li>Excellent interpersonal and communication abilities.</li><li>Candidates residing in Karachi near Sadar will be preferred</li></ul>What We Offer:<ul><li>Competitive Salary</li><li>TA/DA</li><li>EOBI</li><li>Performance Bonus</li><li>Sales Commision</li></ul>Job Type: Full-timePay: Rs35,000.00 - Rs40,000.00 per monthLanguage:<ul><li>English &amp; Urdu (Required)</li></ul>License/Certification:<ul><li>PEC Registration (Required)</li><li>Driving License (Preferred)</li></ul>Work Location: In personApplication Deadline: 15/09/2025

Sale & Service Engineer

Team Zeta (Hiring Agency)

We are urgently hiring &quot;Technical Sales Engineer&quot;Qualification: BS Electrical/ Mechanical/ Chemical EngineeringExperience: 1+ YearsCandidate with experience in Sales of Refrigerators/ AC Compressor or other Home appliances will be considered only Location: Shahrah e Faisal, KarachiJob Type: Full-timePay: Rs80,000.00 - Rs100,000.00 per monthApplication Question(s):<ul><li>Write Your Current Salary Package ( Gross Salary and Benefits)</li></ul>Work Location: On the road

Sales Engineer - Onsite

HR Ways

We are hiring Application Engineer ( REMOTE from Karachi) ﻿﻿Client Introduction: ﻿North-American Agri-tech and automation company﻿Job Description: The Application Engineer plays a critical role in delivering company's Complete Project Confidence to our customers in the controlled-environment agriculture (CEA) and greenhouse automation industry. This position supports both customer retention and new project success by providing technical expertise throughout the entire project life cycle from design and proposal development to commissioning, customer training, and post-installation service. The Application Engineer ensures that the company's climate control, irrigation, and automation solutions are accurately configured, installed, and optimized to achieve maximum performance and customer satisfaction. This role serves as a bridge between engineering, manufacturing, and customer operations.﻿Key Responsibilities﻿﻿1. Review and approve large and custom CAD drawings 2. Assist with solution presentations for large projects 3. Perform startups, commissioning, and customer acceptance tests for critical projects 4. Work with engineering to develop new products 5. Monitor and correct project activities 6. Assist Sales Associates with the lead conversion process by: a. Providing special project quote support b. Produce and deliver customer training seminars c. Create content for Technical Application Notes 7. Assist the Customer Support department with Level 4 support and critical field service calls 8. Assist Manufacturing by dealing with critical UL-related issuesRequirements: <ul><li>﻿﻿﻿Education: Bachelors degree in Electrical, Mechanical, or Automation Engineering (or equivalent technical discipline).</li><li>Skills: </li></ul>1. Strong understanding of greenhouse and grow-room automation systems, including sensors, irrigation, lighting, ventilation, and climate control. 2. Ability to read, interpret, and validate CAD drawings (control panels, wiring diagrams, mechanical layouts) to ensure accuracy and compliance with project requirements. 3. Familiar with PLCs, HMIs, communication protocols (Modbus, BACnet, Ethernet/IP). 4. Experience with system commissioning, calibration, and customer acceptance testing. 5. Understanding of UL compliance, panel fabrication, and electrical safety standards. 6. Skilled in troubleshooting automation systems, controllers, and communication networks. 7. Capable of producing and maintaining technical documentation, application notes, and training materials 8. Strong communication and customer service skills. 9. Familiarity with IoT-based or cloud-connected automation systems is a plus.﻿<ul><li>Personal Qualities: Rigorous, Thorough, Systematic, Attention to details, Team Oriented, Perseverance, Finisher, Organized</li><li>﻿﻿﻿Key Strengths: Analytical, Focus, Arranger, Discipline</li><li>Others: Passion for sustainable agriculture and environmental ﻿automation technologies﻿</li></ul>Other Details: ﻿Work Mode: REMOTE (US hours overlap preferred) ﻿﻿﻿﻿Location: Karachi (only) ﻿Nature of Employment: ﻿Full-Time ﻿﻿Working Timings/Days: ﻿Night Shift (6pm onwards) ﻿Experience: ﻿8+ YearsAbout HR Ways: ﻿HR Ways is an Award winning Technical Recruitment Firm helping software houses and IT Product companies internationally and locally to find IT Talent. HR Ways is engaged by 300+ Employers worldwide ranging from worlds biggest SaaS Companies to most competitive Startups. We have entities in Dubai, Canada, US, UK, Pakistan, India, Saudi Arabia, Portugal, Brazil and other parts of the world. Join our WhatsApp Channel https://shorturl.at/983azto stay updated or visit www.hrways.co to know more.Job Type: Full-timeWork Location: Remote

Full-Stack Embedded Software Lead - Remote

Application Engineer - Automation & Climate control - remote

Meraj limited

About:Meraj Limited is seeking a Technical Sales Engineer with 3&ndash;4 years of experience in a similar industry. The role requires a technically strong, commercially smart individual capable of managing inquiries, tenders, and customer requirements from concept to completion.Key Responsibilities:<ul><li>Manage sales inquiries, RFQs, and tender opportunities for specialized vehicles, fire trucks, and industrial equipment.</li><li>Prepare technical specifications, compliance statements, BOQs, and cost estimations for private and government sector clients.</li><li>Review tender documents and ensure all technical and commercial requirements are accurately addressed.</li><li>Prepare and submit technical and financial proposals, ensuring compliance with client specifications.</li><li>Coordinate with engineering, design, and production teams for technical clarifications and product configurations.</li><li>Support clients with product selection, sizing, and technical recommendations as per application needs.</li><li>Participate in client meetings, presentations, and technical discussions to clarify solutions and build strong customer relationships.</li><li>Maintain and update a pipeline of sales opportunities, ensuring timely follow-ups and reporting to management.</li><li>Assist in post-bid negotiations, order finalization, and handover to project and execution teams.</li></ul>Requirements:<ul><li>Bachelor&rsquo;s degree in Mechanical, Industrial, or related Engineering discipline.</li><li>Strong knowledge of tendering processes, cost estimation, and technical documentation.</li><li>Excellent communication, presentation, and negotiation skills.</li><li>Proficiency in MS Office and AutoCAD (or equivalent tools).</li><li>Ability to work independently and handle multiple projects simultaneously.</li></ul>Interested candidates can share their CVs at careers@merajlimited.comJob Type: Full-timeWork Location: In person

Technical Sales Engineer

Dynamic Tooling Services

We are looking for Dynamic and Competent Service engineer for installation and after sales service of CNC Lathe and CNC Milling Machines .Job Responsibilities :<ul><li>Repair and Maintenance of CNC Lathe &amp; Milling machines</li><li>Resolving issues at customer sites by diagnosing faults and making repairs.</li></ul>Qualification &amp; Experience :<ul><li>TTC / DAE / BTECH Mechanical .</li><li>MUST Have good experience of CNC Lathe or Milling Machines programming .</li><li>Good Experience on Fanuc Controller .</li></ul>Job Location &amp; Accommodation Facility<ul><li>Job location is Karachi.</li></ul>What We Offer<ul><li>Attractive Salary Package with comprehensive range of benefits .</li><li>Foreign Training Opportunities .</li></ul>Job Type: Full-timePay: From Rs70,000.00 per monthApplication Question(s):<ul><li>You are currently living in which city ?</li><li>What is your qualification ?</li><li>Do you have experience of CNC Lathe and Milling Machine Maintenance ?</li><li>Do you have experience of CNC Lathe and Milling Machine Programing ?</li></ul>Work Location: In person

CNC Machines Service Engineer ( DAE Mechanical)

Explore 1381+ Application engineer sales in Charge Female Jobs In Charge Female Jobs In Karachi this January. Find roles across top companies and apply now to boost your career.