instrumentation engineer (pcc & start-up)

dcs supervisor (pcc & start-up) Jobs in Bahrain Jobs In Bahrain Jobs In Bahrain Jobs In Bahrain

dcs supervisor (pcc & start-up)

electrical engineer (pcc & start-up) Jobs in Bahrain Jobs In Bahrain Jobs In Bahrain Jobs In Bahrain

electrical engineer (pcc & start-up)

hvac supervisor Jobs in Bahrain Jobs In Bahrain Jobs In Bahrain Jobs In Bahrain

hvac supervisor

instrumentation engineer (pcc & start-up) Jobs in Bahrain Jobs In Bahrain Jobs In Bahrain Jobs In Bahrain

mechanical supervisor (pcc & start-up) Jobs in Bahrain Jobs In Bahrain Jobs In Bahrain Jobs In Bahrain

mechanical supervisor (pcc & start-up)

electrical engineer pcc start up

Bureau Veritas Group

<div>
 
 Job Description
 
 
 
 FIELD &amp; LEER BUILDING:
 
 
 <ul>
 <li>
 LEER/FIELD PERMIT SYSTEM AND ALL THE NECESSARY ARRANGEMENTS/VERIFICATION FOR ALL ACTIVIES
 </li>
 <li>
 LOTO SHALL BE PROVIDED AND IMPLEMENTED AS PER BU
 </li>
 <li>
 LEER SUBSTATION /MCC PANELPANEL VERIFICATION AND STARTUP
 </li>
 <li>
 ALL ITR CHECKS VERIFICATION
 </li>
 <li>
 INTERLOCK CHECKS
 </li>
 <li>
 EDG FUNCTION TEST
 </li>
 <li>
 ALL MOTOR SOLO RUN TO BE PERFORMED
 </li>
 <li>
 ALL PUMPS AND COMPRESSORS MRT NEED TO BE COMPLETED
 </li>
 <li>
 BATTERY ROOM VERIFICATION
 </li>
 <li>
 INSPECT SWITCHGEAR FOR PHYSICAL DAMAGE BEFORE PERFORMING TEST.
 </li>
 <li>
 VERIFY THE NAME PLATE DETAILS OF THE SWITCHGEAR AGAINST THE APPROVED DRAWINGS.
 </li>
 <li>
 CHECK SWITCHGEAR EARTHING IS DONE PROPERLY AS PER APPROVED DRAWING.
 </li>
 <li>
 CARRY OUT WIRING AND TERMINAL CHECKS ON CONTROL AND AUXILIARY CIRCUITS, AS PER APPROVED SCHEMATIC DRAWINGS.
 </li>
 <li>
 BOM VERIFICATION AGAINST SCHEMATIC DRAWING
 </li>
 <li>
 CHECK THE FUNCTIONING OF CIRCUIT BREAKER AND RECORD THE RESULT.
 </li>
 <li>
 PRIMARY INJECTION TEST
 </li>
 <li>
 PROTECTIVE RELAY TEST (SECONDARY INJECTION TEST)
 </li>
 <li>
 STARTER / MCCB / ISOLATOR CHECKING FOR LVSG SYSTEM
 </li>
 <li>
 ENERGIZATION AND FUNCTION /INTERLOCK VERIFICATION FOR ALL EQUIPMENTS
 </li>
 <li>
 VISUALLY INSPECT FOR EXTERNAL AND INTERNAL MECHANICAL DAMAGE FOR LIGHTING SYSTEM.
 
 
 </li>
 </ul>
 21VERIFY THAT THE NAME PLATE DETAILS/ IFC/DATA SHEET ARE CORRECT AS PER APPROVED DOCUMENT FOR ALL SYSTEM.
 
 
 <ul>
 <li>
 CHECK THAT THE EARTHING CONNECTIONS ARE PROPER AND CHECK EARTHING CONTINUITY.
 </li>
 <li>
 ENERGIZE THE LIGHTING MCCBS.
 </li>
 <li>
 SIMULATE AND CHECK THE OPERATION OF TIMERS/PHOTOCELL SWITCHES
 </li>
 <li>
 POWER UP ALL WELDING SOCKETS ,LIGHTING PANELS AND ALL EQUIPMENTS
 </li>
 <li>
 FUNCTION CHECK FOR ALL EQUIPMENT AND LIGHTING ALL SKIDS AND VENDOR ITEMS
 </li>
 <li>
 VERIFATION AGAINST DRAWING IFC/DATA SHEET FOR ALL SKIDS AND VENDOR ITEMS
 </li>
 <li>
 UPS POWERUP
 </li>
 <li>
 VERIFICATION OF VOLTAGE,UPS
 </li>
 <li>
 DISCHARGE TEST
 </li>
 <li>
 INSPECT THE MOTORS AND LCS FOR ALL SKIDS AND VENDOR ITEMS
 </li>
 <li>
 WINDING RESISTENCE TESTING FOR ALL SKIDS AND VENDOR ITEMS MOTORS
 </li>
 <li>
 IR TESTING FOR ALL SKIDS AND VENDOR ITEMS
 </li>
 <li>
 HVAC commissioning and startup
 
 
 </li>
 </ul>
 Minimum Qualification: Diploma /Bachelor&rsquo;s Degree in Electrical Engineering
 
 
 Experience: Diploma-10&ndash;15 years in oil &amp; gas projects;
 
 
 Bachelor&rsquo;s Degree -8-15 years in oil &amp; gas projects
 
 
 Overseas experience : Yes(Bahrain is preferred)
 
 
 Documentation Responsibility: Test packs, energization permits, red-lines, handover dossiers
 
 
 Soft Skills / Leadership: Leadership, coordination, strong HSE awareness,technically strong
 
 
 Standards knowledge (added advantage ): IEC, IEEE, API; Compressor station experience
 
 
 Minimum Key Technical Competencies: MV/LV switchgear, MCCs, motors, VFDs, protection relays, energization
</div>

Electrical Engineer (PCC & Start-up)

Bureau Veritas

<div><div>Job Description:
FIELD &amp; LEER BUILDING: 
1)LEER/FIELD PERMIT SYSTEM AND ALL THE NECESSARY ARRANGEMENTS/VERIFICATION FOR ALL ACTIVIES 
2)LOTO SHALL BE PROVIDED AND IMPLEMENTED AS PER BU 
3)LEER SUBSTATION /MCC PANELPANEL VERIFICATION AND STARTUP 
4)ALL ITR CHECKS VERIFICATION 
5)INTERLOCK CHECKS 
6)EDG FUNCTION TEST 
7)ALL MOTOR SOLO RUN TO BE PERFORMED 
8)ALL PUMPS AND COMPRESSORS MRT NEED TO BE COMPLETED 
9)BATTERY ROOM VERIFICATION 
10) INSPECT SWITCHGEAR FOR PHYSICAL DAMAGE BEFORE PERFORMING TEST. 
11) VERIFY THE NAME PLATE DETAILS OF THE SWITCHGEAR AGAINST THE APPROVED DRAWINGS. 
12) CHECK SWITCHGEAR EARTHING IS DONE PROPERLY AS PER APPROVED DRAWING. 
13)CARRY OUT WIRING AND TERMINAL CHECKS ON CONTROL AND AUXILIARY CIRCUITS, AS PER APPROVED SCHEMATIC DRAWINGS. 
14)BOM VERIFICATION AGAINST SCHEMATIC DRAWING 
15)CHECK THE FUNCTIONING OF CIRCUIT BREAKER AND RECORD THE RESULT. 
16)PRIMARY INJECTION TEST 
17)PROTECTIVE RELAY TEST (SECONDARY INJECTION TEST) 
18)STARTER / MCCB / ISOLATOR CHECKING FOR LVSG SYSTEM 
19)ENERGIZATION AND FUNCTION /INTERLOCK VERIFICATION FOR ALL EQUIPMENTS 
20)VISUALLY INSPECT FOR EXTERNAL AND INTERNAL MECHANICAL DAMAGE FOR LIGHTING SYSTEM. 
21VERIFY THAT THE NAME PLATE DETAILS/ IFC/DATA SHEET ARE CORRECT AS PER APPROVED DOCUMENT FOR ALL SYSTEM. 
22)CHECK THAT THE EARTHING CONNECTIONS ARE PROPER AND CHECK EARTHING CONTINUITY. 
23) ENERGIZE THE LIGHTING MCCBS. 
24) SIMULATE AND CHECK THE OPERATION OF TIMERS/PHOTOCELL SWITCHES 
25)POWER UP ALL WELDING SOCKETS ,LIGHTING PANELS AND ALL EQUIPMENTS 
26)FUNCTION CHECK FOR ALL EQUIPMENT AND LIGHTING ALL SKIDS AND VENDOR ITEMS 
27)VERIFATION AGAINST DRAWING IFC/DATA SHEET FOR ALL SKIDS AND VENDOR ITEMS 
29)UPS POWERUP 
30)VERIFICATION OF VOLTAGE,UPS 
31)DISCHARGE TEST 
33)INSPECT THE MOTORS AND LCS FOR ALL SKIDS AND VENDOR ITEMS 
34)WINDING RESISTENCE TESTING FOR ALL SKIDS AND VENDOR ITEMS MOTORS 
35)IR TESTING FOR ALL SKIDS AND VENDOR ITEMS 
36)HVAC commissioning and startup
Minimum Qualification: Diploma /Bachelor&rsquo;s Degree in Electrical Engineering
Experience: Diploma-10&ndash;15 years in oil &amp; gas projects; 
Bachelor&rsquo;s Degree -8-15 years in oil &amp; gas projects
Overseas experience : Yes(Bahrain is preferred)
Documentation Responsibility: Test packs, energization permits, red-lines, handover dossiers
Soft Skills / Leadership: Leadership, coordination, strong HSE awareness,technically strong
Standards knowledge (added advantage ): IEC, IEEE, API; Compressor station experience
Minimum Key Technical Competencies: MV/LV switchgear, MCCs, motors, VFDs, protection relays, energization</div></div>

<div>
 
 Job Description
 
 
 
 <ul>
 <li>
 SOLO RUN FOR ALL MOTORS &amp; COMPRESSOR-(41 NOS APPROX-EACH NCFS)
 </li>
 <li>
 MECHANICAL RUN TEST (MRT)FOR ALL PUMPS AND COMPRESSOR (56 APPROX-EACH NCFS))
 </li>
 <li>
 INTERNAL CLEANING OF VESSEL INSPECTIONS -(86 APPROX-EACH NCFS)
 </li>
 <li>
 BOX-UP INSPECTION--(86 APPROX-EACH NCFS)
 </li>
 <li>
 INITIAL FILLING OF LUBRICATION AND CHEMICALS ETC (4 NOS APPROX )
 </li>
 <li>
 VARIOUS INSPECTIONS AT EACH STAGE WITH BAPCO UPSTREAM (PCC/START-UP)
 </li>
 <li>
 ALIGHNMENT(HOT)--(56 APPROX-EACH NCFS)
 </li>
 <li>
 VENDOR ASSISTANCE
 </li>
 <li>
 TROUBLE SHOOTING DURING PCC/START-UP
 </li>
 <li>
 LUBE OIL FLUSHING/SEAL SYSTEM START UP
 </li>
 <li>
 INITIAL START OF ALL MECHANICAL EQUIPMENTS AND CONTINUE MONITORING
 </li>
 <li>
 ALL WALKTHROUGH AND DOCUMENTATION(MEI/RFC/RFSU/PSSR)
 </li>
 <li>
 MECHANICAL PUNCHES CLEARANCE DURING PCC&amp;STARTUP
 </li>
 <li>
 PERIT AND LOTO SYSTEM IMPLEMENTATION
 
 
 </li>
 </ul>
 Minimum Qualification: Diploma / Bachelor&rsquo;s Degree in Mechanical Engineering
 
 
 Experience: Diploma-10&ndash;15 years in oil &amp; gas projects;
 
 
 Bachelor&rsquo;s Degree -8-10 years in oil &amp; gas projects
 
 
 Overseas experience : Yes(Bahrain is preferred)
 
 
 Documentation Responsibility: Mechanical completion records, punch clearance, handover dossiers
 
 
 Soft Skills / Leadership: Manpower supervision, problem-solving, site leadership,Leadership, coordination, strong HSE awareness
 
 
 Standards knowledge (added advantage ): API, ASME; rotating &amp; static equipment,Compressor station experience
 
 
 Minimum Key Technical Competencies: Documentation,MRT,Compressors, pumps, vessels, alignment,Lube oil flushing, preservation
</div>

Mechanical Supervisor (PCC & Start-up)

<div><div>Job Description: 
1)SOLO RUN FOR ALL MOTORS &amp; COMPRESSOR-(41 NOS APPROX-EACH NCFS) 
 2) MECHANICAL RUN TEST (MRT)FOR ALL PUMPS AND COMPRESSOR (56 APPROX-EACH NCFS)) 
3) INTERNAL CLEANING OF VESSEL INSPECTIONS -(86 APPROX-EACH NCFS) 
4)BOX-UP INSPECTION-(86 APPROX-EACH NCFS) 
5)INITIAL FILLING OF LUBRICATION AND CHEMICALS ETC (4 NOS APPROX ) 
6)VARIOUS INSPECTIONS AT EACH STAGE WITH BAPCO UPSTREAM (PCC/START-UP) 
7)ALIGHNMENT(HOT)-(56 APPROX-EACH NCFS) 
8)VENDOR ASSISTANCE 
9)TROUBLE SHOOTING DURING PCC/START-UP 
10)LUBE OIL FLUSHING/SEAL SYSTEM START UP 
11)INITIAL START OF ALL MECHANICAL EQUIPMENTS AND CONTINUE MONITORING 
12)ALL WALKTHROUGH AND DOCUMENTATION(MEI/RFC/RFSU/PSSR) 
13)MECHANICAL PUNCHES CLEARANCE DURING PCC&amp;STARTUP 
14)PERIT AND LOTO SYSTEM IMPLEMENTATION
Minimum Qualification: Diploma / Bachelor&rsquo;s Degree in Mechanical Engineering
Experience: Diploma-10&ndash;15 years in oil &amp; gas projects; 
Bachelor&rsquo;s Degree -8-10 years in oil &amp; gas projects
Overseas experience : Yes(Bahrain is preferred)
Documentation Responsibility: Mechanical completion records, punch clearance, handover dossiers
Soft Skills / Leadership: Manpower supervision, problem-solving, site leadership,Leadership, coordination, strong HSE awareness
Standards knowledge (added advantage ): API, ASME; rotating &amp; static equipment,Compressor station experience
Minimum Key Technical Competencies: Documentation,MRT,Compressors, pumps, vessels, alignment,Lube oil flushing, preservation</div></div>

<div>
 
 Job Description
 
 
 
 LIER BUILDING:
 
 
 <ul>
 <li>
 RESPONSIBLE FOR THE LIER BUILDING DAILY OPERATION
 </li>
 <li>
 ALL DOCUMENTATION AND PUNCHES CLEARANCE DURING THE FAT AND SAT
 </li>
 <li>
 CONTROL NARRATIVE VERIFICATION FOR EACH UNITS
 </li>
 <li>
 ESD PANEL CAUSE AND EFFECT TESTING
 </li>
 <li>
 FGS CAUSE AND EFFECT TESTING VERIFICATION
 </li>
 <li>
 TRIP AND ALARM VERIFICATION
 </li>
 <li>
 LOGIC FORCE BYPASSING FOR PCC &amp; START UP ACTIVITIES
 </li>
 <li>
 PLANT TROBLE SHOOTING INCLUDING OPERATION AND START UP/ COMMISSIONING
 </li>
 <li>
 MRT FUNCTIONAL TEST SKID AND EQUIPMENTS DCS MONITORING
 </li>
 <li>
 VERIFICATION OF INTIAL LINE UP DCS VERIFICATION
 </li>
 <li>
 SAT FOR THE ENTIRE PLANT WITH VENDOR
 </li>
 <li>
 PLC FUNCTIONL TEST
 </li>
 <li>
 COMMISSIONING OF EACH SYSTEM
 </li>
 <li>
 INTRODUCTION TO HC DCS OPERATION
 </li>
 <li>
 PURGING &amp; INERTATION DCS MONITORING
 </li>
 <li>
 PLANT PERFORMANCE TEST RUN
 </li>
 <li>
 MONITORING FOR ABNORMALITIES AND RECTIFICATION WITH VENDOR
 </li>
 <li>
 PLANT OPERATIONS / START UP AND STABILIZATION UNTILL HANDOVER
 </li>
 <li>
 PERIT AND LOTO SYSTEM IMPLEMENTATION
 
 
 </li>
 </ul>
 Minimum Qualification: diploma/Bachelor&rsquo;s Degree in mcehanical/Control / Instrumentation / Electrical /chemical Engineering
 
 
 Experience: Diploma-10&ndash;15 years in oil &amp; gas projects;
 
 
 Bachelor&rsquo;s Degree -8-15 years in oil &amp; gas projects
 
 
 Overseas experience : Yes(Bahrain is preferred)
 
 
 Documentation Responsibility: FAT/SAT reports, C&amp;E matrices, backups, final handover
 
 
 Soft Skills / Leadership: Leadership under start-up pressure, vendor coordination
 
 
 Standards knowledge (added advantage ): Yokogawa / Honeywell / Emerson / Siemens,Compressor station experience
 
 
 Minimum Key Technical Competencies: DCS/ESD/F&amp;G logic checks, graphics, alarms, troubleshooting
</div>

DCS Supervisor (PCC & Start-up)

<div><div>Job Description:
LIER BUILDING: 
1)RESPONSIBLE FOR THE LIER BUILDING DAILY OPERATION 
2) ALL DOCUMENTATION AND PUNCHES CLEARANCE DURING THE FAT AND SAT 
3) CONTROL NARRATIVE VERIFICATION FOR EACH UNITS 
4) ESD PANEL CAUSE AND EFFECT TESTING 
5) FGS CAUSE AND EFFECT TESTING VERIFICATION 
6) TRIP AND ALARM VERIFICATION 
7) LOGIC FORCE BYPASSING FOR PCC &amp; START UP ACTIVITIES 
8) PLANT TROBLE SHOOTING INCLUDING OPERATION AND START UP/ COMMISSIONING 
9) MRT FUNCTIONAL TEST SKID AND EQUIPMENTS DCS MONITORING 
10) VERIFICATION OF INTIAL LINE UP DCS VERIFICATION 
11) SAT FOR THE ENTIRE PLANT WITH VENDOR 
12) PLC FUNCTIONL TEST 
13) COMMISSIONING OF EACH SYSTEM 
14) INTRODUCTION TO HC DCS OPERATION 
15) PURGING &amp; INERTATION DCS MONITORING 
16) PLANT PERFORMANCE TEST RUN 
17) MONITORING FOR ABNORMALITIES AND RECTIFICATION WITH VENDOR 
18) PLANT OPERATIONS / START UP AND STABILIZATION UNTILL HANDOVER 
19)PERIT AND LOTO SYSTEM IMPLEMENTATION
Minimum Qualification: diploma/Bachelor&rsquo;s Degree in mcehanical/Control / Instrumentation / Electrical /chemical Engineering
Experience: Diploma-10&ndash;15 years in oil &amp; gas projects; 
Bachelor&rsquo;s Degree -8-15 years in oil &amp; gas projects
Overseas experience : Yes(Bahrain is preferred)
Documentation Responsibility: FAT/SAT reports, C&amp;E matrices, backups, final handover
Soft Skills / Leadership: Leadership under start-up pressure, vendor coordination
Standards knowledge (added advantage ): Yokogawa / Honeywell / Emerson / Siemens,Compressor station experience
Minimum Key Technical Competencies: DCS/ESD/F&amp;G logic checks, graphics, alarms, troubleshooting</div></div>

<div><div>Job Description: 
1)AIR BLOWING OF ALL PIPING SYSTEMS BASED ON MARK-UP PACKAGES AND WITNESS (DOCUMENTATION ALSO)-(65 PACKAGES APPROX-EACH NCFS) 
2)SYSTEM/SUB-SYSTEM WISE LEAK TEST &amp; WITNESS -(36 PACKAGES APPROX-EACH NCFS) 
3)PURGING &amp; INERTING OF EACH SYSTEM-(20 PACKAGES APPROX-EACH NCFS ) 
4)SYSTEM LINEUP FOR PCC / STARTUP 
5)PLANT/ UNIT OPERATION 
6)VARIOUS INSPECTIONS AT EACH STAGE WITH BAPCO UPSTREAM (PCC/START-UP) 
7) ALL WALKTHROUGH(MEI/RFC/RFSU/PSSR) 
8)DOCUMENTATION 
9)CLIENT CO-ORDINATION 
13)SYSTEM PUNCHES CLEARANCE DURING PCC&amp;STARTUP 
14)PERIT AND LOTO SYSTEM IMPLEMENTATION
Documentation Responsibility: Test pack closure, line clearance certificates, handover records
Soft Skills / Leadership: Strong field coordination, safety-focused,Leadership, coordination, strong HSE awareness
Standards knowledge (added advantage ): ASME B31.3; P&amp;IDs, isometrics,Compressor station experience
Minimum Key Technical Competencies: Line walk, flushing, blowing, pressure testing, valve installation
Minimum Qualification: Diploma / Bachelor&rsquo;s Degree in Mechanical / Piping
Experience: Diploma-10&ndash;15 years in oil &amp; gas projects; 
Bachelor&rsquo;s Degree -8-10 years in oil &amp; gas projects</div></div>

Piping Supervisor /Engineer (PCC & Start-up)

Explore 340+ Electrical engineer pcc start up in Bahrain Jobs In Bahrain Jobs In Bahrain Jobs In Bahrain this February. Find roles across top companies and apply now to boost your career.

340 electrical engineer pcc start up jobs In Bahrain Jobs In Bahrain Jobs In Bahrain Jobs In Bahrain

Electrical Engineer (PCC & Start-up)

Electrical Engineer (PCC & Start-up)

Mechanical Supervisor (PCC & Start-up)

Mechanical Supervisor (PCC & Start-up)

DCS Supervisor (PCC & Start-up)

DCS Supervisor (PCC & Start-up)

Piping Supervisor /Engineer (PCC & Start-up)