hvac design engineer

Al Qudra Contracting

Key Responsibilities:<ul><li>Load Calculations: Perform cooling and heating load calculations using industry-standard software.</li><li>System Design &amp; Selection: Design comprehensive HVAC systems, including air handling units (AHUs), chillers, VRF systems, ductwork networks, chilled water piping, and mechanical ventilation.</li><li>Equipment Sizing: Select and specify appropriate HVAC equipment, fans, pumps, diffusers, and control dampers based on engineering calculations and project requirements.</li><li>Compliance &amp; Standards: Ensure all designs comply with international codes and standards (e.g., ASHRAE, NFPA, SMACNA) as well as local building and environmental regulations.</li><li>Value Engineering: Optimize designs for energy efficiency, cost-effectiveness, and sustainability, exploring green building practices (like LEED or Estidama, if applicable).</li><li>Documentation &amp; Support: Prepare detailed design drawings, schematic diagrams, technical specifications, and Bill of Quantities (BOQ). Coordinate closely with architectural, structural, and electrical design teams.</li></ul>Requirements &amp; Qualifications:<ul><li>Education: Bachelor&rsquo;s degree in Mechanical Engineering.</li><li>Experience: Minimum of [5&ndash;7] years of proven experience in HVAC design within an engineering consultancy or MEP contracting firm.</li><li>Software Expertise: Proficiency in Hourly Analysis Program (HAP), AutoCAD, and Autodesk Revit (MEP).</li><li>Technical Knowledge: Deep understanding of psychrometrics, fluid dynamics, heat transfer, and building management systems (BMS).</li><li>Skills: Strong analytical thinking, excellent attention to detail, and the ability to manage multiple design deadlines simultaneously.</li></ul>Pay: AED1.00 per monthWork Location: In person

HVAC Design Engineer

Sharjah General Contracting Company

A mechanical engineer is responsible for designing, installing, and testing heating, ventilation, and air conditioning (HVAC), plumbing, drainage, and fire protection systems.Job Description:<ul><li>Leading end-to-end planning, execution, and delivery of electro-mechanical projects across commercial, residential.</li><li>Managing project scope, cost, quality, timelines, and resources, ensuring on-time delivery within budget and in compliance with safety and regulatory standards.</li><li>Conducting technical reviews of drawings, BOQs, and specifications; validate system design against project requirements.</li><li>Driving procurement planning and vendor management for MEP systems, ensuring timely delivery of equipment and material.</li><li>Monitoring installation and commissioning of HVAC systems (chillers, AHUs, VRFs), electrical panels, fire-fighting systems, plumbing, and BMS integration.</li><li>Supervised electromechanical installations and ensured compliance with design specifications at project sites.</li></ul>Requirement: <ul><li>Experience: 10 -15 Years&rsquo; experience</li><li>Qualification: bachelor Degree of Mechanical Engineering</li><li>Nationality: Arab nationals</li></ul>Pay: AED16,000.00 per monthAbility to commute/relocate:<ul><li>Sharjah: Reliably commute or planning to relocate before starting work (Preferred)</li></ul>Application Question(s):<ul><li>Expected joining date?</li></ul>Experience:<ul><li>mechanical engineer : 10 years (Preferred)</li><li>residential / commercial projects: 7 years (Preferred)</li></ul>Language:<ul><li>Arabic (Preferred)</li></ul>Work Location: In person

Mechanical Engineer

Here is a professional job advertisement for a Mechanical BIM Engineer, focusing on the technical expertise required for high-level construction and MEP (Mechanical, Electrical, and Plumbing) projects.Job Vacancy: Mechanical BIM EngineerWe are seeking a highly skilled Mechanical BIM Engineer to join our Engineering/Design department. The successful candidate will be responsible for creating, managing, and coordinating detailed 3D mechanical models to ensure seamless project execution from design to construction.Key Responsibilities:<ul><li>BIM Modeling: Develop detailed 3D models for Mechanical systems (HVAC, Firefighting, and Plumbing) using Revit MEP according to project specifications.</li><li>Clash Detection: Perform interference checks and clash detection using Navisworks, resolving conflicts with structural and other MEP services.</li><li>Shop Drawings: Extract high-quality shop drawings, sections, and isometric views from the BIM model for site installation.</li><li>Coordination: Participate in BIM coordination meetings to synchronize mechanical designs with Architecture and Structure.</li><li>BOQ Extraction: Generate accurate Quantities Take-off (QT) and Schedules directly from the BIM models.</li><li>Standards Compliance: Ensure all models adhere to BIM execution plans (BEP) and international/company standards.</li></ul>Requirements &amp; Qualifications:<ul><li>Education: Bachelor&rsquo;s Degree in Mechanical Engineering.</li><li>Software Expertise: Mastery of Autodesk Revit, Navisworks Manage, and AutoCAD. Knowledge of Dynamo or BIM 360 is a plus.</li><li>Experience: Minimum of [e.g., 3-5 years] of experience in BIM implementation within the construction or consultancy sector.</li><li>Technical Knowledge: Deep understanding of mechanical design codes (ASHRAE, NFPA, IPC) and construction sequences.</li><li>Analytical Skills: Strong problem-solving abilities and high attention to detail.</li></ul>Work Location: In person

Mechanical BIM Engineer

Key Responsibilities:<ul><li>BIM Modeling: Create accurate 3D MEP models (HVAC, Electrical, Plumbing, and Firefighting) from 2D CAD drawings, schematic designs, and project specifications using Autodesk Revit.</li><li>Clash Detection &amp; Coordination: Run clash detection tests using Navisworks, identify spatial conflicts between MEP services and structural/architectural elements, and resolve them through engineering coordination.</li><li>Shop Drawings: Extract high-quality 2D shop drawings, builder&rsquo;s work drawings, section details, and isometric views from the coordinated BIM model for site installation.</li><li>Quantity Take-Offs (QTO): Generate accurate Material Take-Offs (MTO) and Bill of Quantities (BOQ) directly from the BIM model to support the procurement team.</li><li>Standard Compliance: Ensure all models and drawings adhere to company BIM standards, project BIM Execution Plans (BEP), and international building codes.</li><li>As-Built Models: Update BIM models based on site redline markups to deliver precise As-Built models and asset data at project closeout.</li></ul>Requirements &amp; Qualifications:<ul><li>Education: Bachelor&rsquo;s degree in Mechanical or Electrical Engineering.</li><li>Experience: Minimum of [3&ndash;5] years of experience as an MEP BIM Engineer, specifically working on large-scale construction or infrastructure projects.</li><li>Software Expertise: Advanced proficiency in Autodesk Revit (MEP), Navisworks Manage, and AutoCAD. Familiarity with Dynamo or BIM 360/Autodesk Construction Cloud is a major plus.</li><li>Technical Knowledge: Strong understanding of MEP engineering design concepts, installation methodologies, and international standards.</li><li>Skills: Excellent problem-solving skills, strong spatial awareness, and the ability to collaborate effectively with architects, structural engineers, and site operations.</li></ul>Pay: AED1.00 per monthWork Location: In person

MEP BIM Engineer

AlRukn AlMeamary Eng. Consultants

Senior Structural Engineer &ndash; First Category (Unlimited) Required | SharjahA leading Engineering Consultancy Firm in Sharjah is seeking to hire a qualified First Category Structural Engineer (Unlimited Classification) to join its team on a full-time basis.Requirements:Holding a valid First Category (Unlimited) Structural Engineer Classification approved in Sharjah.Minimum 5 years of experience in engineering consultancy firms within the UAE.Strong knowledge of Sharjah Municipality regulations, engineering standards, and approval procedures.Proven experience in structural design, review, and approval of engineering drawings and calculations.Ability to manage projects and coordinate with government authorities, consultants, contractors, and clients.Proficiency in relevant engineering software and design tools.Excellent leadership, communication, and management skills.QualificationsStrong foundation in Structural Engineering and Civil Engineering, with the ability to apply engineering principles to building and acoustic structures.Proficiency in Structural Analysis and engineering Calculations to assess loads, stresses, and structural performance.Hands-on experience with Computer-Aided Design (CAD) tools for preparing and reviewing structural drawings and models.Bachelor&rsquo;s degree or higher in Structural Engineering, Civil Engineering, or a closely related field.Familiarity with relevant international and regional building codes, standards, and best practices.Ability to interpret architectural, mechanical, and acoustic design requirements and integrate them into structural solutions.Strong problem-solving skills, attention to detail, and ability to work effectively in a multidisciplinary team.Good written and verbal communication skills in English; experience in the Middle East construction sector is an advantage.Work Location: In person

Senior Structural Engineer

Velath Engineering International FZC

Diploma in Mechanical Engineering with 4-6 years&rsquo; experience in oil and gas industry , Prepare GA and fabrication detail drawings of API 650 Storage tanks, sphere, pressure vessel, columns, heat exchanger, plant piping/pipe supports, Structural drawing and MTO/Bill of Quantities and preparation, drawing checking and internal coordination with other discipline draughtsman and design engineer. As built drawing preparation. Fully conversant with AutoCAD and Cad Worx software. Handling drafting part of EPC Projects based on international codes, major Oil and Gas industry standards and good engineering practice. Responsible for more than one project at one time.Job Type: PermanentPay: AED2,500.00 - AED3,500.00 per monthWork Location: In person

Mechanical Draftsman

BEEAH Group

<div>
 
 About BEEAH
 
 
 BEEAH is pioneering sustainability and inspiring innovation to empower humanity&rsquo;s future. Through innovation, full-circle resource management, and digital transformation, BEEAH is addressing environmental challenges, deploying the latest technologies, and creating the roadmap for a smart and sustainable future. Renowned for groundbreaking environmental innovations and smart solutions, BEEAH operates across the United Arab Emirates, the Kingdom of Saudi Arabia, and Egypt, to create a better tomorrow for all.
 
 
 
 
 
 
 Job Description:
 
 
 
 
 
 
 We are currently seeking a highly motivated and organized
 
 Design Engineer
 
 to join our
 
 BEEAH Recycling
 
 team. This role will be responsible for designing and drafting solutions for various waste treatment technologies and infrastructure related to municipal, healthcare, industrial hazardous, and fallen stock waste management. This role will require expertise in process design, layouts design, cross-sectional drawings, and preparation of detailed Bills of Quantities (BoQ) for civil and electromechanical items. The Designer will also focus on implementing latest waste treatment technologies including MRF (Material Recovery Facility), Composting, RDF (Refuse Derived Fuel) processing, Incineration, Autoclaves, Stabilization methods and Engineered landfill.
 
 
 
 
 
 
 Key Responsibilities:
 
 
 <ul>
 <li>
 Business Analysis: Gather, document, and analyze business requirements to identify insights, risks, and improvement opportunities.
 </li>
 <li>
 Design &amp; Layout Development: Prepare detailed layouts and cross-sectional drawings for municipal, healthcare, hazardous, and fallen stock waste treatment facilities.
 </li>
 <li>
 Engineering Collaboration: Work closely with civil, mechanical, and electrical engineers to ensure integrated and implementable plant designs.
 </li>
 <li>
 Bill of Quantities (BoQ): Develop accurate BoQs for civil, electromechanical, and infrastructure components, defining all material, labor, and equipment needs.
 </li>
 <li>
 Waste Treatment Technologies: Design systems for MRFs, composting, RDF, landfills, remediation, and specialized facilities such as incineration and autoclave units.
 </li>
 <li>
 Compliance &amp; Sustainability: Ensure all designs meet environmental, health, and safety regulations while promoting energy-efficient and sustainable solutions.
 </li>
 <li>
 Technical Reporting: Prepare design reports, specifications, and documentation; support project execution during construction and commissioning stages.
 </li>
 <li>
 Stakeholder Coordination: Collaborate with project managers, facility operators, and clients; participate in design reviews and technical presentations.
 </li>
 <li>
 Health &amp; Safety Commitment: Uphold company HSE policies, practice safe design and site conduct, and participate in all mandatory safety trainings.
 </li>
 </ul>
 
 
 
 
 
 Qualifications and Experience:
 
 
 
 
 
 
 
 Education:
 
 
 <ul>
 <li>
 Bachelor&rsquo;s degree in business administration, Data Science, Marketing, Design, or a related field.
 </li>
 <li>
 Bachelor&rsquo;s degree in civil engineering, Environmental Engineering, Mechanical Engineering, or a related field.
 </li>
 <li>
 Additional certification or courses related to waste management, environmental sustainability, or process engineering would be advantageous.
 </li>
 <li>
 Minimum 5 years of relevant experience in the design of waste management infrastructure, particularly in municipal, healthcare, hazardous, and fallen stock waste treatment.
 </li>
 <li>
 Proven experience with technologies such as waste sorting, composting, RDF, incineration, autoclaving, stabilization processes and old dumpsites remediation.
 </li>
 <li>
 Experience in creating layouts, cross-sectional designs, and technical documentation for civil and electromechanical systems.
 </li>
 <li>
 Familiarity with relevant environmental laws, regulations, and sustainability practices.
 </li>
 </ul>
 
 
 
 
 
 Skills:
 
 
 <ul>
 <li>
 Design &amp; Drafting Proficiency &ndash; Skilled in using AutoCAD, Inventor, or similar design software to produce detailed technical layouts and engineering drawings.
 </li>
 <li>
 Multidisciplinary Engineering Knowledge &ndash; Strong grasp of civil, mechanical, and electrical design principles related to waste management facilities and infrastructure.
 </li>
 <li>
 Waste Treatment Technology Expertise &ndash; Solid understanding of waste processing systems including sorting, composting, RDF, incineration, autoclave, and landfill technologies.
 </li>
 <li>
 Technical Documentation &amp; BoQ Preparation &ndash; Experienced in preparing and interpreting Bills of Quantities, design specifications, and technical reports with accuracy.
 </li>
 <li>
 Attention to Detail &amp; Accuracy &ndash; High precision in developing technical drawings, cross-sections, and calculations, ensuring compliance with design and safety standards.
 </li>
 <li>
 Collaboration &amp; Project Coordination &ndash; Proven ability to work effectively with multidisciplinary teams, clients, and stakeholders to deliver cohesive, compliant, and sustainable designs.
 </li>
 </ul>
 
 
</div>

Design Engineer

Explore 28+ Hvac design engineer in Sharjah this July. Find roles across top companies and apply now to boost your career.