26024 - rwy - business development lead (cyber security) - oman (muscat)

senior piping designer

stewarding supervisor

assistant manager-mechanical Jobs in Muscat

assistant manager-mechanical

mep supervisor

production supervisor

preservation supervisor mechanical piping

Al Hathaifa Business Solution

<p>SCOPE OF SERVICE</p><p>CONTRACTOR&rsquo;s PERSONNEL is accountable for the following activities:</p><p>Compliance with the HSE instructions, rules and procedures in force for compliance with the HSE contractual clauses and other documents governing ties with the contractors</p><p>Assist COMPANY Preservation Lead in supervising Mechanical/Pipe preservation activities at EPC Contractor and /or Subcontractor&rsquo;s premises</p><p>Ensure EPC Contractor&rsquo;s Preservation Procedures, Method of statements are approved and implemented at work site(s) as per COMPANY Technical Referential and applicable local and international codes</p><p>Anticipate and advise corrective measure with respect to Potential issues that may occur during the Project phase.</p><p>Ensure EPC Contractors&rsquo; resources, tools and equipment&rsquo;s are adequate to achieve expected level of preservation requirements.</p><p>Ensure Preservation has been performed correctly and formally recorded into PCS system.</p><p>Monitor Preservation log sheets / records for Mechanical Equipment&rsquo;s are maintained during each stage of the project</p><p>Monitor &amp; Report associated key dates with respect to construction schedule meets project milestones</p><p>ACTIVITIES</p><p>Promote &amp; comply with applicable safety instructions and other COMPANY HSE procedures in all activities,</p><p>Carry out work in compliance with COMPANY values and policies, relevant laws and regulations, agreed priorities and objectives, COMPANY standards and procedures and good industry practices,</p><p>Treat all information obtained during course of the work with confidentiality,</p><p>Monitor Mechanical equipment&rsquo;s storage (short / long term) and necessary preservations/ de-preservations during Construction &amp; Pre-comm phase.</p><p>Ensure relevant Preservation registers, logs, reports, Identification labeling are executed by EPC Contractor/Sub-Contractor</p><p>Organize regular meetings, follow up, site inspections are conducted with respective counterparts from EPC Contractor/Sub-Contractor</p><p>Ensure the Preservation related activities are prepared and tracked using PCS system Preservation record sheet.</p><p>Ensure Preservation history and records are made available at any time until the equipment is formally transferred</p><p>Ensure Lessons Learned on Preservations issues from Past Projects are taken into consideration for Project.</p><p>Coordinate any HSE concern or issue with HSE team, and to immediately report to Preservation Lead and HSE team in case of any accident/incident happened</p><p>Promote alternative solutions to reduce and to optimize the activities.</p><p>Reports on a day-to-day basis directly to the Preservation Lead.</p><p>Carry out any other duty or task that may be assigned by hierarchical superiors</p><p>C1 Controlled</p><p>QUALIFICATIONS &amp; EXPERIENCE REQUIRED</p><p>Qualification: Bachelor&rsquo;s degree or equivalent in engineering,</p><p>Professional Experience in the offshore oil &amp; gas project (number of years): 10</p><p>Experience within project: (number of years): 5.</p><p>Familiar with Total Energies General Specifications, EDMS (PRODOM/MANASA).</p><p>Construction, Pre-comm, Quality Inspection experience is required for projects.</p><p>Good knowledge on Various Preservation practices, Risk &amp; Hazards associated and mitigation measures.</p><p>A good knowledge of Oil and Gas Industry Standards and International codes/standards related to Piping and associated component&rsquo;s</p><p>Good leadership skills and good communication skills.</p><p>Good reporting skills,</p><p>Ability to work on projects in a complex and multicultural environment.</p><p>Be skilled in using computer programs for word processing, database management, spreadsheets and e-mail communications.</p><p>Mandatory language is English &amp; Local language based on EPC location (Mandarin for WHP and CPP, Korean for CPP)</p><p>H2S OPITO and T-BOSIET trainings</p><p>Job Type: Full-time</p>

Preservation Supervisor – Mechanical/Piping

Wood

<div>
 <strong>
  Job Description
  <br/>
  <br/>
 </strong>
 <strong>
  Remarkable people, trusted by clients to design and advance the world
  <br/>
  <br/>
 </strong>
 Wood is recruiting for an Omani Senior Piping to join our team in Oman, focusing on delivering across FEED and Detail design scopes of work.
 <br/>
 <br/>
 <strong>
  Responsibilities
  <br/>
  <br/>
 </strong>
 Translate the limited information from the Concept Selection Report and/or Basis for Design (Select Phase) into Basis for Design and/or Front End Design and project specifications.
 <br/>
 <br/>
 Carry out the Piping Design FEED activities (Define stage) for a specific project in order to generate the Piping Design FEED deliverables on time to the required quality standard according to DCAF requirements.
 <br/>
 <br/>
 <strong>
  Designing the future. Transforming the world
  <br/>
  <br/>
 </strong>
 Reflecting The Market Focus For The Office In Both Brownfield And Green Field Opportunities, Multi-skilled Personnel Are Sought, In Particular Those With Experience In
 <br/>
 <br/>
 Onshore Oil and Gas
 <br/>
 <br/>
 <strong>
  What We Can Offer
  <br/>
  <br/>
 </strong>
 <ul>
  <li>
   Meaningful and interesting projects delivered to leaders of industry across oil and gas and emerging energy sectors
  </li>
  <li>
   Commitment to Diversity and Inclusion; we are an organisation actively committed to diversity and inclusion across our business with employee networks committed to giving all employees a voice
  </li>
  <li>
   Competitive salary with regular salary reviews to ensure we are rewarding at the right level in line with the market
  </li>
  <li>
   Employee Assistance Programme: Allows you to feel comfortable knowing that you or your immediate family members can confidentially discuss any work or personal issues that are an inevitable part of life. The programme helps support your mental, physical, social &amp; financial well-being.
  </li>
  <li>
   Professional Memberships; One professional membership, registration, subscription, certification and/or license cost per annum for all active Wood employees. The membership must be relevant to the role you are currently employed in or be part of a development plan. Reimbursement should be claimed via the expenses procedure system, with supporting evidence.
  </li>
  <li>
   Global connections: join experts around the world who are at the leading edge of our industry, shaping the standards of our profession
   <br/>
   <br/>
  </li>
 </ul>
 <strong>
  Typical Responsibilities
  <br/>
  <br/>
 </strong>
 <ul>
  <li>
   Contribute to Basis for Design (BfD).
  </li>
  <li>
   Develop Equipment Layout / Plot Plan based on PFS/UFS, Technical safety requirements.
  </li>
  <li>
   Develop Piping Layout based on PEFS / UEFS in 2D / 3D environment.
  </li>
  <li>
   Follow Quality Management System (QMS) requirements in line with ISO 9001-2015 and API Q2 2nd edition requirements.
  </li>
  <li>
   Inter-discipline co-ordination including exchange of input.
  </li>
  <li>
   Assist in progress monitoring
  </li>
  <li>
   Initiate and Check Design Activities &amp; Deliverables
  </li>
  <li>
   Have good relationship with other team members.
  </li>
  <li>
   Be able to work in a team environment where recognition of team performance as a whole is a greater priority than projecting individual contribution.
  </li>
  <li>
   Visit site for data gathering; identification of tie-ins; etc.
  </li>
  <li>
   Maintain standard drawing templates.
  </li>
  <li>
   Prove repeatability/constant improvement across a broad range of technical &amp; cultural differences.
  </li>
  <li>
   Develop/share best practices, work processes, etc. based on gained experience in projects.
  </li>
  <li>
   Establish/adopt new technologies and processes.
  </li>
  <li>
   Apply/maintain engineering processes, systems and tools (software).
   <br/>
   <br/>
  </li>
 </ul>
 <strong>
  Qualifications
  <br/>
  <br/>
 </strong>
 <strong>
  What makes you remarkable?
  <br/>
  <br/>
 </strong>
 At Wood, we are committed to equal opportunities and welcome all talented individuals to consider joining our team. So even if you don't match every statement below but feel you h
 <br/>
 <br/>
 <ul>
  <li>
   Diploma in Mechanical Engineering or equivalent.
  </li>
  <li>
   Minimum 12 years experience in Oil &amp; Gas Piping Design with 3 years experience in ACAD / 3D PDMS Design system
  </li>
  <li>
   Minimum 5 year in Front End Engineering Design (FEED)/ Engineering Experience.
  </li>
  <li>
   Good communicator and strong team player.
  </li>
  <li>
   Fluent in English; Written and Spoken.
   <br/>
   <br/>
  </li>
 </ul>
 <strong>
  About Us
  <br/>
  <br/>
 </strong>
 Wood is a global leader in consulting and engineering, helping to unlock solutions to critical challenges in energy and materials markets. We provide consulting, projects and operations solutions in 60 countries, employing around 35,000 people. www.woodplc.com
 <br/>
 <br/>
 <strong>
  Diversity Statement
  <br/>
  <br/>
 </strong>
 We are an equal opportunity employer that recognises the value of a diverse workforce. All suitably qualified applicants will receive consideration for employment on the basis of objective criteria and without regard to the following (which is a non-exhaustive list): race, colour, age, religion, gender, national origin, disability, sexual orientation, gender identity, protected veteran status, or other characteristics in accordance with the relevant governing laws.
</div>


Senior Piping Designer

<div><p><b>Remarkable people, trusted by clients to design and advance the world
</b></p><p>Wood is recruiting for an Omani Senior Piping to join our team in Oman, focusing on delivering across FEED and Detail design scopes of work.</p></div><p></p>
<br><div><p>Translate the limited information from the Concept Selection Report and/or Basis for Design (Select Phase) into Basis for Design and/or Front End Design and project specifications.
</p><p>Carry out the Piping Design FEED activities (Define stage) for a specific project in order to generate the Piping Design FEED deliverables on time to the required quality standard according to DCAF requirements.<br>
<br>
</p><p><b>Designing the future. Transforming the world
</b></p><p>Reflecting the market focus for the office in both brownfield and green field opportunities, multi-skilled personnel are sought, in particular those with experience in:
</p><p>Onshore Oil and Gas
</p><p><b>What we can offer
</b></p><ul><li><b>Meaningful and interesting projects </b>delivered to leaders of industry across oil and gas and emerging energy sectors
</li><li><b>Commitment to Diversity and Inclusion </b>; we are an organisation actively committed to diversity and inclusion across our business with employee networks committed to giving all employees a voice
</li><li><b>Competitive salary </b>with regular salary reviews to ensure we are rewarding at the right level in line with the market
</li><li><b>Employee Assistance Programme: </b>Allows you to feel comfortable knowing that you or your immediate family members can confidentially discuss any work or personal issues that are an inevitable part of life. The programme helps support your mental, physical, social &amp; financial well-being.
</li><li><b>Professional Memberships; </b>One professional membership, registration, subscription, certification and/or license cost per annum for all active Wood employees. The membership must be relevant to the role you are currently employed in or be part of a development plan. Reimbursement should be claimed via the expenses procedure system, with supporting evidence.
</li><li><b>Global connections </b>: join experts around the world who are at the leading edge of our industry, shaping the standards of our profession
</li></ul><p><b>Typical responsibilities
</b></p><ul><li>Contribute to Basis for Design (BfD).
</li><li>Develop Equipment Layout / Plot Plan based on PFS/UFS, Technical safety requirements.
</li><li>Develop Piping Layout based on PEFS / UEFS in 2D / 3D environment.
</li><li>Follow Quality Management System (QMS) requirements in line with ISO 9001-2015 and API Q2 2nd edition requirements.
</li><li>Inter-discipline co-ordination including exchange of input.
</li><li>Assist in progress monitoring
</li><li>Initiate and Check Design Activities &amp; Deliverables
</li><li>Have good relationship with other team members.
</li><li>Be able to work in a team environment where recognition of team performance as a whole is a greater priority than projecting individual contribution.
</li><li>Visit site for data gathering; identification of tie-ins; etc.
</li><li>Maintain standard drawing templates.
</li><li>Prove repeatability/constant improvement across a broad range of technical &amp; cultural differences.
</li><li>Develop/share best practices, work processes, etc. based on gained experience in projects.
</li><li>Establish/adopt new technologies and processes.
</li><li>Apply/maintain engineering processes, systems and tools (software).</li></ul></div>
<br><div><p><b>What makes you remarkable?
</b></p><p>At Wood, we are committed to equal opportunities and welcome all talented individuals to consider joining our team. So even if you don't match every statement below but feel you h
</p><ul><li>Diploma in Mechanical Engineering or equivalent.
</li><li>Minimum 12 years experience in Oil &amp; Gas Piping Design with 3 years experience in ACAD / 3D PDMS Design system
</li><li>Minimum 5 year in Front End Engineering Design (FEED)/ Engineering Experience.
</li><li>Good communicator and strong team player.
</li><li>Fluent in English; Written and Spoken.</li></ul></div>
<br><div><div>Wood is a global leader in consulting and engineering, helping to unlock solutions to critical challenges in energy and materials markets. We provide consulting, projects and operations solutions in 60 countries, employing around 35,000 people. www.woodplc.com<br>
</div><div></div><br>
<div><b>Diversity Statement
</b></div><div>We are an equal opportunity employer that recognises the value of a diverse workforce. All suitably qualified applicants will receive consideration for employment on the basis of objective criteria and without regard to the following (which is a non-exhaustive list): race, colour, age, religion, gender, national origin, disability, sexual orientation, gender identity, protected veteran status, or other characteristics in accordance with the relevant governing laws.</div></div>

Global Business Solution and Business

<p><b>.Job Responsibilities:</b></p><ul><li>Operate, maintain, and repair laundry equipment including washers, dryers, presses, and steamers.</li><li>Conduct preventive maintenance and troubleshoot equipment issues to ensure smooth operations.</li><li>Replace and service components such as belts, valves, motors, and electrical parts as required.</li><li>Maintain accurate maintenance logs and report any recurring issues to the supervisor.</li></ul><p><b>Qualification</b>:</p><p>ITI in Electrical or Mechanical Engineering</p><p><b>Experience:</b></p><p>Minimum 5 years of hands-on experience in the Facility Management (FM) industry</p><p>Job Type: Full-time</p>

Laundry Technician

NAWA LLC

<div>
 <p>
  <strong>
   Company Description
  </strong>
 </p>
 <p>
  Nawa LLC specializes in comprehensive vehicle care, delivering expert services for both conventional and electric vehicles. From body repair and painting to mechanical works and advanced EV servicing, Nawa LLC ensures high standards of performance and reliability. The company caters to a diverse clientele, including individual customers, fleet operators, and government sectors. Nawa LLC is known for its commitment to excellence and customer satisfaction.
 </p>
 <p>
  <br/>
 </p>
 <p>
  <strong>
   Role Description
  </strong>
 </p>
 <p>
  This is a full-time, on-site role for an EV Maintenance Supervisor based in Muscat. The EV Maintenance Supervisor will oversee maintenance operations, coordinate preventive and corrective maintenance, and ensure optimal equipment functionality. Responsibilities include supervising maintenance teams, diagnosing and troubleshooting electrical and mechanical issues, managing repair schedules, and ensuring safety standards are maintained. The role requires collaboration with team members to meet service quality expectations.
 </p>
 <p>
  <br/>
 </p>
 <p>
  <strong>
   Qualifications
  </strong>
 </p>
 <ul>
  <li>
   Strong Supervisory Skills, including leadership, team coordination, and effective communication
  </li>
  <li>
   Proficiency in Equipment Maintenance and Preventive Maintenance practices
  </li>
  <li>
   Expertise in Maintenance &amp; Repair for both conventional and electric vehicles
  </li>
  <li>
   Proven ability in Troubleshooting to identify and resolve technical issues efficiently
  </li>
  <li>
   In-depth knowledge of EV systems and charging infrastructure is an advantage
  </li>
  <li>
   Ability to diagnose and repair battery packs, Battery Management Systems (BMS), inverters, and charging systems
  </li>
  <li>
   Familiarity with CAN bus networks, diagnostic software, and over-the-air updates
  </li>
  <li>
   Ability to inspect and repair complex cases for the EV vehicles and hybrid vehicles
  </li>
  <li>
   specialize in diagnosing, maintaining, and repairing high-voltage systems, electric motors, and battery management systems (BMS) in electric (EV) and hybrid electric vehicles (HEVs)
  </li>
  <li>
   Performing high-voltage system de-energization, insulation testing, and ensuring safety compliance
  </li>
  <li>
   Using diagnostic tools to interpret fault codes in lithium-ion batteries, motors, and inverters
  </li>
  <li>
   Repairing or replacing specialized EV/HV components, such as DC-DC converters and onboard chargers
  </li>
  <li>
   Excellent organizational and problem-solving skills
  </li>
 </ul>
 <p>
  <br/>
 </p>
 <p>
  <strong>
   Certifications and Experience:
  </strong>
 </p>
 <ul>
  <li>
   Minimum of a Diploma or Associate Degree in Automotive Technology, Electrical Engineering, or Mechatronics
  </li>
  <li>
   Level 3 or Level 4 Award in Electric/Hybrid Vehicle Diagnosis, Repair, and Replacement, or equivalent
  </li>
  <li>
   Minimum 4 years of relevant experience
  </li>
 </ul>
</div>


EV Maintenance Supervisor

Bonyan Architectural

<p><i><b>Responsibilities:</b></i></p><p>Supervise MEP works as per drawings &amp; schedule<br/>Ensure quality &amp; compliance with standards<br/>Monitor material usage &amp; support cost control<br/>Enforce HSE &amp; maintain safe site<br/>Coordinate with project teams, subcontractors, and consultants to ensure smooth workflow and resolve technical issues</p><p>Train the site staffs</p><p>Requirements :</p><p>5+ years GCC experience as MEP Supervisor</p><p>Diploma/Bachelor&rsquo;s in Mechanical or Electrical Engineering</p><p>Strong knowledge of MEP site execution and Drawings</p><p>Good communication and coordination abilities</p><p>Valid Oman Driving License</p><p>Job Type: Full-time</p><p>Pay: RO200.000 - RO300.000 per month</p>

MEP Supervisor

Enerflex

<div><div><div><div><div><b>Business Unit: </b>Eastern Hemisphere
</div></div></div></div><div><div><div><div><b>Location:
</b>Muscat, OM
</div></div></div></div><div><div><div><div><b>Travel: </b>None
</div></div></div></div><div><div><div><div><b>Req ID: </b>3602
</div></div></div></div><div><div><div><div><p>Driver I
</p></div></div></div></div><div><div><div><div><ul><li>Pickup and drop off staff from site to accommodation and vice versa</li>
<li>Conduct daily maintenance checks on assigned vehicles, maintain a logbook of the vehicle service, and report any issues to the supervisor</li>
<li>Follow the driving plans and schedules provided by the Logistic Coordinator</li>
<li>Load and unload pickup trucks with project-related inventory parts and materials and verify the contents against shipping documents when needed</li>
<li> Participate in purchased materials deliveries and component repairs across the Oman if and when required</li>
<li>Assist the team leader in reviewing spare parts for corrective, preventive, and predictive maintenance jobs and record keeping as required</li>
<li>Report delays, accidents, or other traffic and transportation situations in a prompt manner using the agreed upon communication devices</li>
<li>Obey traffic laws and always follow established traffic and transportation procedures</li>
<li>Comply with all Enerflex HR, Quality, HSE, and all the Company policies, procedures, processes, work instructions and guidelines</li>
</ul>
<div>Perform all other duties as assigned by Supervisor / Manager</div><div><div><div><div><b>
Summary</b></div>
</div><div><ul><li>Pickup and drop off staff from site to accommodation and vice versa</li>
<li>Conduct daily maintenance checks on assigned vehicles, maintain a logbook of the vehicle service, and report any issues to the supervisor</li>
<li>Follow the driving plans and schedules provided by the Logistic Coordinator</li>
<li>Load and unload pickup trucks with project-related inventory parts and materials and verify the contents against shipping documents when needed</li>
<li> Participate in purchased materials deliveries and component repairs across the Oman if and when required</li>
<li>Assist the team leader in reviewing spare parts for corrective, preventive, and predictive maintenance jobs and record keeping as required</li>
<li>Report delays, accidents, or other traffic and transportation situations in a prompt manner using the agreed upon communication devices</li>
<li>Obey traffic laws and always follow established traffic and transportation procedures</li>
</ul></div></div><div><div><div><b>Principle Responsibilities and Duties</b></div>
</div></div><div></div><div><div><div><b>Qualifications</b></div>
</div><div><ul><li>Valid Oman driving license</li>
<li>Minimum 5 years of driving experience using a light-duty vehicle in Oman</li>
<li>Experience and knowledge of mechanical equipment maintenance and parts is preferable</li>
<li>Team player with a positive attitude and strong time management skills</li>
</ul>
<div>Proficiency in English language. Arabic is a plus.</div></div></div><div><div><div><b>
Physical Requirements</b></div>
</div></div></div><div></div><div>
Enerflex grants equal employment opportunity to all qualified persons without regard to race, color, sex, age, national origin, religion, genetic information, mental or physical disability, or any other characteristic protected by applicable federal, state or local law. Equal employment opportunities are provided in recruitment, hiring, promotions, wages, benefits, and other terms, conditions and privileges of employment.</div></div></div></div></div></div><p></p>

Driver I

Explore 58+ Preservation supervisor mechanical piping in Muscat this February. Find roles across top companies and apply now to boost your career.

58 preservation supervisor mechanical piping jobs In Muscat

Preservation Supervisor – Mechanical/Piping

Senior Piping Designer

Senior Piping Designer

Laundry Technician

EV Maintenance Supervisor

MEP Supervisor

Driver I