hvac technician

a/c technician

cost control engineer

elv technician

technical manager

quality control technician

McDermott International, Ltd

<div>
 
 Job Description
 
 
 
 
 Job Overview:
 
 
 
 The Quality Operations Technician provides solutions to problems in the operations discipline without supervisory approval and will evaluate and select solutions from established operating procedures and scientific procedures. The Quality Operations Technician will support Quality Manager is assigned tasks and coordinate administrative scope in Quality Department.
 
 
 
 Responsibilities
 
 
 
 
 Key Tasks and Responsibilities:
 
 
 
 <ul>
 <li>
 Act as a focal point for relevant craft supervisors to access current information related to standards and codes, technical publications, inspection tools, and measuring instruments
 </li>
 <li>
 Ensure all inspection forms are off a standard format and completed monthly
 </li>
 <li>
 Maintain Quality records and relative Codes/Standards
 </li>
 <li>
 Focal point between facility/vessel and Administrative Office regarding the status of Corrective Action Register Issues
 </li>
 <li>
 Assist in establishing a process to measure non-conformances, i.e., production delays, unscheduled helicopter flights, redundant vessel movements, etc.
 </li>
 <li>
 Assist as directed with ISO:9001, ISO: 14001, ISM, and ISPS code audit prep and CAR closures
 </li>
 <li>
 Act as a focal point to help expedite facility issues relevant to Quality
 </li>
 <li>
 Assist with facility/vessel Key Performance Indicator measurements
 </li>
 <li>
 Maintain registers on the following: ladders, below hook lift devices, CAR, training, and MSDS
 
 
 </li>
 </ul>
 
 Qualifications
 
 
 
 
 Essential Qualifications and Education:
 
 
 
 <ul>
 <li>
 High school diploma or equivalent
 </li>
 <li>
 Strong computer skills
 </li>
 <li>
 Organized and disciplined individual with well-developed communication skills
 </li>
 <li>
 Strong interpersonal skills required to deal effectively with operational management throughout the organization
 
 
 </li>
 </ul>
 
 About Us
 
 
 
 Our ingenuity fuels daily life. Together, we&rsquo;ve forged some of the most trusted partnerships across the energy value chain to make what was once just an idea a reality: laying subsea infrastructure thousands of feet below sea level, installing platforms hundreds of miles from shore, using our expertise to design and build offshore wind infrastructure, and reshaping the onshore landscape to deliver the energy products the world needs safely and sustainably.
 
 
 For more than 100 years, we've been making the impossible possible. Today, we're driving the energy transition with more than 30,000 of the brightest minds across 54 countries.
 
 
</div>

Quality Ops Tech (Project Administrator)

<div>
 
 Job Description
 
 
 
 
 Job Overview:
 
 
 
 The Quality Operations Technician provides solutions to problems in the operations discipline without supervisory approval and will evaluate and select solutions from established operating procedures and scientific procedures.
 
 
 
 Responsibilities
 
 
 
 
 Key Tasks and Responsibilities:
 
 
 
 <ul>
 <li>
 Act as a focal point for relevant craft supervisors to access current information related to standards and codes, technical publications, inspection tools, and measuring instruments
 </li>
 <li>
 Ensure all inspection forms are off a standard format and completed monthly
 </li>
 <li>
 Maintain Quality records and relative Codes/Standards
 </li>
 <li>
 Focal point between facility/vessel and Administrative Office regarding the status of Corrective Action Register Issues
 </li>
 <li>
 Assist in establishing a process to measure non-conformances, i.e., production delays, unscheduled helicopter flights, redundant vessel movements, etc.
 </li>
 <li>
 Assist as directed with ISO:9001, ISO: 14001, ISM, and ISPS code audit prep and CAR closures
 </li>
 <li>
 Act as a focal point to help expedite facility issues relevant to Quality
 </li>
 <li>
 Assist with facility/vessel Key Performance Indicator measurements
 </li>
 <li>
 Maintain registers on the following: ladders, below hook lift devices, CAR, training, and MSDS
 
 
 </li>
 </ul>
 
 Qualifications
 
 
 
 
 Essential Qualifications and Education:
 
 
 
 <ul>
 <li>
 High school diploma or equivalent
 </li>
 <li>
 Strong computer skills
 </li>
 <li>
 Organized and disciplined individual with well-developed communication skills
 </li>
 <li>
 Strong interpersonal skills required to deal effectively with operational management throughout the organization
 
 
 </li>
 </ul>
 
 About Us
 
 
 
 Our ingenuity fuels daily life. Together, we&rsquo;ve forged some of the most trusted partnerships across the energy value chain to make what was once just an idea a reality: laying subsea infrastructure thousands of feet below sea level, installing platforms hundreds of miles from shore, using our expertise to design and build offshore wind infrastructure, and reshaping the onshore landscape to deliver the energy products the world needs safely and sustainably.
 
 
 For more than 100 years, we've been making the impossible possible. Today, we're driving the energy transition with more than 30,000 of the brightest minds across 54 countries.
 
 
</div>

Quality Ops Tech (Vendor Inspection Coordinator)

Zolo Real Estate LLC

Role OverviewThe Quality Control Officer is responsible for inspecting, verifying, and controlling the quality of architectural and finishing works following completion of structural and civil construction. The role focuses on workmanship, aesthetics, material application, interfaces, tolerances, and final presentation quality across all finishing trades prior to area acceptance, handover, or occupation.This position is activated once the project transitions into the finishing phase and plays a critical role in ensuring that all visible and user-facing elements of the project meet approved drawings, specifications, mock-ups, samples, and agreed quality benchmarks.Key Responsibilities1. Inspection Planning &amp; Request Handling&middot; Receive and review Requests for Inspection (RFI / WIR &ndash; Work Inspection Requests) submitted by the Construction Department for finishing works.&middot; Verify inspection readiness prior to attending inspections, including:1. Completion status of works2. Approved drawings and latest revisions3. Approved materials, samples, and mock-ups4. Availability of inspection checklists and ITP references&middot; Reject or reschedule inspection requests where works are incomplete, inaccessible, non-compliant, or insufficiently prepared, issuing formal remarks where required.&middot; Plan and sequence inspections by area, trade, and work package, aligned with project inspection and test plans (ITPs).2. Inspection of Finishing Works<ul><li>Inspect completed and ongoing finishing works to verify compliance with approved architectural drawings, specifications, and method statements.</li><li>Conduct detailed inspections of finishes including (but not limited to):</li></ul>1. Plaster and skim coats2. Painting systems3. Gypsum ceilings4. Floor and wall tiling5. Stone and cladding works6. Joinery, wardrobes, kitchens, and vanities7. Sanitary fittings and accessories8. Aluminum doors, windows, frames, and glazing&middot; Verify dimensions, alignment, levels, flatness, edge detailing, joints, transitions, and overall workmanship quality.&middot; Check interfaces betweenfinishes and MEP elements, ensuring alignment, coordination, and acceptable visual outcome.<ul><li>Ensure finishing works are completed to the required standard prior to snagging, handover, or occupation.</li></ul>3. Inspection Reporting &amp; Documentation&middot; Prepare and issue formal Inspection Reports following each inspection, clearly recording:1. Inspection scope and reference documents2. Observations and compliance status3. Identified defects or deviations4. Required corrective actions&middot; Maintain structured inspection checklists for each finishing trade and work package.&middot; Record comprehensive photographic evidence for:5. Non-conforming works6. Corrective actions7. Final acceptance conditions&middot; Maintain accurate inspection logs and traceability records aligned with project QMS requirements.4. Non-Conformance Management (NCR Process)&middot; Identify and formally raise Non-Conformance Reports (NCRs) for finishing works that do not comply with approved requirements.&middot; Classify non-conformances based on severity and impact (minor, major, repeat, or systemic).&middot; Coordinate with construction teams to define corrective and preventive actions.&middot; Track NCR status, deadlines, and responses until full closure.&middot; Re-inspect rectified works and formally verify compliance prior to NCR closure.5. Escalation &amp; Quality Control Authority&middot; Escalate unresolved or repeated quality issues to the Technical Manager in accordance with project escalation protocols.&middot; Flag high-risk workmanship issues that may impact:1. Aesthetic quality2. Durability3. Handover acceptance4. Claims, rework, or delays&middot; Recommend work suspension, additional mock-ups, or corrective sequencing where quality risks persist.&middot; Support audits and investigations related to finishing quality failures or disputes.6. Snagging, De-Snagging &amp; Handover Support&middot; Participate in systematic snagging inspections and preparation of snag lists.&middot; Verify completion and quality of de-snagging works prior to area acceptance.&middot; Support preparation of finishing-related handover documentation, including:1. Inspection records2. NCR logs and closure evidence3. Approved material and sample records&middot; Assist during consultant, client, and authority walkthroughs for finishing works.7. Coordination &amp; Site Interface&middot; Coordinate closely with:1. Site engineers2. Finishing supervisors3. Subcontractors4. Design and technical teams&middot; Communicate inspection findings clearly, technically, and formally.&middot; Ensure finished works are adequately protected from damage by subsequent activities.&middot; Promote quality awareness and finishing discipline during high-pressure close-out stages.8. Health, Safety &amp; Site Compliance&middot; Conduct inspections in full compliance with site HSE procedures.&middot; Identify and report unsafe practices, poor housekeeping, or inadequate protection of completed finishes.&middot; Ensure access, lighting, scaffolding, and work conditions are suitable for safe inspection.Qualifications &amp; Experience&middot; Diploma or Bachelor&rsquo;s degree in Civil Engineering, Architecture, Interior Design or related discipline.&middot; 10&ndash;12 years of experience, with demonstrated responsibility for finishing works quality control on large-scale projects.&middot; Strong technical knowledge of architectural finishing systems, tolerances, and workmanship standards.&middot; Proven experience managing:1. Inspection Requests (WIR/RFI)2. Inspection Reports3. NCRs and corrective action tracking4. Snagging and de-snagging processes&middot; High attention to detail, strong technical judgement, and consistency in quality assessment.&middot; Ability to assess quality holistically, considering interfaces, sequencing, and final presentation not isolated elements.Technical Skills &amp; Competencies&middot; Strong technical understanding of architectural and finishing works workmanship standards&middot; Demonstrated practical knowledge of finishing installation methods, tolerances, and sequencing&middot; Proven ability to interpret and apply drawings, details, specifications, and approved samples&middot; High level of competence in executing and controlling finishing ITPs and inspections&middot; Sound judgement in identifying, classifying, and resolving quality non-conformances&middot; Practical experience in managing WIRs, inspection outcomes, and follow-up actions&middot; Strong coordination capability across architectural and MEP finishing interfaces&middot; Ability to assess finishing quality holistically, including visual alignment and usability&middot; Effective communication of technical quality issues with site and subcontractor teamsJob Type: Full-time

Quality Control Officer – Finishing Works

Reel

<div>RME Machinery &amp; Equipment Trading LLC is an affiliate Company of REEL International whose head office is in France. The Company is specialized in the industrial supply of complex bulk materials handling solutions and serving a worldwide portfolio of established clients. 
 
<h2 class="jobSectionHeader">Position:
</h2>We are seeking a focused and diligent QA/QC Engineer to be an integral part of our Aluminium industry project in the Middle East. With a strong foundation in mechanical engineering, and an appreciation for electrical systems, the successful candidate will be responsible for reviewing and approving Inspection and Test Plans (ITPs) and other project related quality documents, overseeing the quality of local fabrication, and ensuring the quality of construction throughout the project execution. 
Key Responsibilities 
<ul><li>
Review, approve, and oversee the implementation of fabrication and construction Inspection and Test Plans (ITPs) in accordance with project and industry standards</li><li>
Conduct rigorous quality inspections and audits on local fabrication processes to ensure compliance with quality requirements</li><li>
Collaborate closely with fabrication shops to address and rectify any quality-related issues promptly</li><li>
Establish and maintain quality standards for the construction phase of the project, ensuring that construction activities meet project specifications and standards</li><li>
Lead and coordinate the QA/QC inspections for all stages of the project, assuring the quality of workmanship and materials</li><li>
Streamline communication between project management, engineering, and construction teams to uphold quality objectives</li><li>
Monitor and verify the quality of all manufactured goods</li><li>
Facilitate the correction of non-conformance issues and implement preventive measures to avoid recurrence</li><li>
Ensure quality documentation is maintained accurately and prepare quality reports for project management review</li><li>
Act as the main point of contact for all QA/QC matters related to local fabrication and construction quality, providing guidance and support to the project team</li></ul><h2 class="jobSectionHeader"> 
Requirements:
</h2>Qualifications<ul><li>
Bachelor&rsquo;s degree in mechanical engineering, with Electrical Engineering knowledge considered advantageous</li><li>
A minimum of 8 years of experience in QA/QC, particularly with a focus on construction and fabrication within industrial sectors</li><li>
Certified Quality Inspector (CQI) or equivalent certification in Quality Management; substantial experience with ITPs</li><li>
Comfortable with the interpretation of engineering drawings and technical specifications</li><li>
Awareness of quality control practices, standards, and compliance requirements specific to the Aluminium industry</li><li>
Experience with regulatory compliance and adherence to international standards such as ISO 9001 or comparable.</li></ul> 
Skills<ul><li>
Strong attention to detail and commitment to quality</li><li>
Analytical mindset with the ability to troubleshoot and solve complex problems</li><li>
Excellent communication skills, both verbal and written, with the ability to coordinate with various teams</li><li>
Proven ability to manage priorities in a fast-paced, dynamic environment</li><li>
Leadership skills with a hands-on approach to training and development</li></ul><h2 class="jobSectionHeader"> 
Other information:
</h2>Working Conditions<ul><li>
The role is based on-site and requires adherence to all safety regulations and company policies</li><li>
Work will require entering construction areas with exposure to noise, machinery, and other conditions typical of an industrial environment</li><li>
Usage of safety gear and compliance with safety protocols is always mandatory</li></ul> 
Job is located at Dubai, UAE</div>

Quality Control (QA/QC) Engineer

Eye for Talent

Roles and Responsibilities-<ul><li>Coordinate logistics, QC, and operations for inbound material inspections; prepare reports.</li><li>Set packaging standards with procurement to meet global requirements.</li><li>Ensure inbound materials pass QC and are shipment ready.</li><li>Conduct preloading inspections with 3rd party warehouse.</li><li>Prepare QAR and NCR reports for out-of-spec products.</li><li>Monitor inventory aging; revalidate shelf life.</li><li>Participate in bulk loading at 3rd party/supplier sites to ensure compliance.</li><li>Investigate NCRs with the technical team; submit reports.</li><li>Inspect production operations periodically for SOP adherence.</li><li>Assist senior Chemist in R&amp;D, Technical Service, Complaint Handling, QC, Revalidation, etc.</li><li>Incoming Consignments:</li><li>Train team on ERP matching and report issues.</li><li>Inspect consignments per supplier grade.</li><li>Coordinate QC sampling; update ERP for relabelling</li><li>Outgoing Consignments:</li><li>Verify loading matches sales orders; prevent damage.</li><li>Supervise relabelling; ensure process accuracy.</li><li>Resolve process issues and coordinate inspections.</li></ul>Job Type: Full-timeApplication Question(s):<ul><li>Do you have a degree in Chemical engineering or related field ?</li><li>Do you have any experience in Quality Assurance / Quality Control in a Chemical manufacturing Company.</li></ul>Education:<ul><li>Bachelor's (Required)</li></ul>

Chemical Engineer - QA /QC

GOLD PRIME FZCO

We are looking for skilled and detail-oriented QC Technicians to join our team. The ideal candidate should have strong knowledge of Dr.Fone software or experience in manual grading and quality checking of iPhones. Proficiency in Dr.Fone is highly important for this role.Key Requirements:<ul><li>Experience in iPhone quality checking or grading</li><li>Good knowledge of Dr.Fone software</li><li>Ability to handle bulk devices with accuracy and speed</li><li>Strong attention to detail and responsibility</li></ul>How to Apply: Interested candidates can WhatsApp their details to 0549949606.Job Types: Full-time, Permanent, Contract Contract length: 24 months

QC Technician

We are looking for skilled and detail-oriented QC Technicians to join our team. The ideal candidate should have strong knowledge of Dr.Fone software or experience in manual grading and quality checking of iPhones. Proficiency in Dr.Fone is highly important for this role.Key Requirements:<ul><li>Experience in iPhone quality checking or grading</li><li>Good knowledge of Dr.Fone software</li><li>Ability to handle bulk devices with accuracy and speed</li><li>Strong attention to detail and responsibility</li></ul>How to Apply: Interested candidates can WhatsApp their details to 0549949606.Job Types: Full-time, Permanent, Contract, Fresher Contract length: 24 months

QC Technicians

Explore 3232+ Quality control technician in Dubai this March. Find roles across top companies and apply now to boost your career.