ac technician

equipment technician

heavy equipment mechanical technician Jobs in Egypt

heavy equipment mechanical technician

maintenance technician

aircraft technician

Air Arabia

<div>
 Date: 12 Nov 2025
 
 
 Company: Air Arabia Egypt (E5)
 
 
 Location:
 
 
 Cairo, EG
 
 
 Country: EG
 
 
 
 Job Purpose
 
 
 
 Assists the Engineer to perform Airframe, Engine, and avionics Maintenance tasks on assigned Air Arabia aircrafts including inspections, repairs and component replacement, performs and records work up to required standards and in accordance with Air Arabia and regulatory requirements.
 
 
 
 Key Result Responsibilities
 
 
 
 
 Operational Excellence
 
 
 
 <ul>
 <li>
 Reviews assigned tasks with the Engineer/Manager to gain full understanding of the work, priorities, documentation requirements and cautions, prior to starting work.
 </li>
 <li>
 Prepares and performs scheduled aircraft maintenance according to assignments from the Engineer-in-Charge ensuring that the required documentation, parts, tools and GSE are obtained and used per issued instructions.
 </li>
 <li>
 Carries out scheduled aircraft test and inspection tasks to the standard necessary to fully identify and record any defects or damage in accordance with approved maintenance procedures.
 </li>
 <li>
 Carries out servicing, repairs, component replacements and tests as directed by the Engineer-in-Charge and fully in accordance with approved data and procedures.
 </li>
 <li>
 Ensures proper tooling / equipment is drawn from stores to perform tasks, returning all of it in good condition following completion of work.
 </li>
 <li>
 Regularly reports the status of assigned tasks to the Engineer-in-Charge and alerts him/her to any problems with aircraft condition or with the execution of the work.
 
 
 </li>
 </ul>
 Key Result Responsibilities - Continued
 
 
 
 Safety
 
 
 
 <ul>
 <li>
 Manages the safety of own assigned maintenance tasks, ensuring all published mandatory precautions are taken prior to commencing work and during task execution.
 </li>
 <li>
 Takes positive steps to protect self and other persons in the area of the maintenance activity from any possible injury, including the use of proper GSE and protective equipment.
 </li>
 <li>
 Pays attention to human factors aspects of maintenance, ensuring that work interruption procedures are followed and that adequate access and lighting is used for maintenance and inspections.
 
 
 </li>
 </ul>
 
 Reputation and Teamwork
 
 
 
 <ul>
 <li>
 Internal Customer Service: provides helpful information and support to own team and to other department personnel involved with managing scheduled maintenance checks.
 </li>
 <li>
 Representing Air Arabia: presents a positive and competent image of technical professionalism to other companies&rsquo; personnel and RBG customers.
 
 
 </li>
 </ul>
 
 Cost Awareness
 
 
 
 <ul>
 <li>
 Maintains positive awareness to the cost of aircraft maintenance including use of time and materials. Minimises unnecessary waste of consumable material and part repair cost by avoiding unnecessary damage and repeat work during maintenance.
 
 
 </li>
 </ul>
 
 Qualifications (Academic, Training, Languages)
 
 
 
 <ul>
 <li>
 Qualified and experienced Civil Aircraft Maintenance Technician (Diploma is acceptable).
 </li>
 <li>
 Ability to use computer (Microsoft Office).
 </li>
 <li>
 Ability to obtain Egyptian Driver&rsquo;s License.
 
 
 </li>
 </ul>
 
 Work Experience
 
 
 
 
 External applicants
 
 
 
 <ul>
 <li>
 At least 2 years&rsquo; experience performing maintenance on large commercial aircraft, preferably Airbus types.
 </li>
 <li>
 At least 2 years&rsquo; experience in a Line or Base Maintenance environment.
 </li>
 <li>
 Able to demonstrate solid basic understanding of Aircraft Maintenance theory and practice.
 </li>
 </ul>
</div>

Aircraft Technician

Emirates

<div>
 
 
 Job Purpose
 
 
 
 A personality that shines, the ability to adapt to any situation and make people feel at ease. These are a few of the qualities we&rsquo;re looking for in our cabin crew.
 
 
 As the face of Emirates, you&rsquo;ll be the person customers turn to for help and direction when they fly with us, so you need to be friendly, observant and able to provide the right support.
 
 
 Being a member of the cabin crew is so much more than a service role - safety is our highest priority. You&rsquo;ll need to lead confidently and take control when it comes to managing aircraft services, security, and safety procedures. This comes from the world-class learning experience our crew receive at our state-of-the-art facility in Dubai.
 
 
 
 
 
 
 Qualifications &amp; Experience
 
 
 
 
 
 
 
 Here are some other things we look for in our cabin crew:
 
 
 <ul>
 <li>
 You&rsquo;ve had more than a year&rsquo;s experience in hospitality/customer service
 </li>
 <li>
 You have a positive attitude and the natural ability to provide excellent service in a team environment, dealing with people from many cultures
 </li>
 <li>
 Your minimum qualification is high school graduate (Grade 12)
 </li>
 <li>
 You need to be fluent in written and spoken English (ability to speak another language is an advantage)
 </li>
 <li>
 You&rsquo;re at least 160cm tall and can reach 212 cm while standing on tiptoes, to enable you to reach emergency equipment on all aircraft types
 </li>
 <li>
 No visible tattoos while you&rsquo;re in Emirates cabin crew uniform (without covering them with bandages or cosmetics)
 </li>
 <li>
 As Emirates cabin crew, you&rsquo;ll be based in Dubai and will need to meet the UAE's employment visa requirements
 </li>
 </ul>
 
 
 
 
 Aside from the requirements of the role, you should be determined to always perform to the highest standards, focus on being solution oriented, and be able to manage a demanding work schedule. You should have the ability to deliver an authentic experience to our customers. You&rsquo;ll be culturally aware and reflect the Emirates personality - professional, empathetic, progressive, visionary and cosmopolitan.
 
 
 
 
 
 Before clicking the Apply button, please keep the following
 
 documents
 
 ready to submit with your application:
 
 <ul>
 <li>
 Recent CV in English
 </li>
 <li>
 Recent photo
 </li>
 </ul>
 
 
 
 
 
 Salary &amp; Benefits
 
 
 
 
 
 
 Your pay is made up of three components:
 
 <ol>
 <li>
 a fixed basic salary,
 </li>
 <li>
 an hourly pay for operated flights and
 </li>
 <li>
 an overseas meal allowance.
 </li>
 </ol>
 
 
 
 
 Basic salary = AED 4,980 / month,
 
 
 Flying Pay = AED 69.60 / hour based on avg. 80-100 hours / month,
 
 
 Average Total Pay = AED 11,244 / month (~USD 3,100, EUR 2,600 or GBP 2,280)
 
 
 * These are approximate numbers for Grade II (Economy Class).
 
 
 
 
 
 Meal allowances for night stops are credited to the salary in arrears the following month.
 
 
 Hotel accommodation as well as transport to and from the airport is provided by the company.
 
</div>

Muscat Cabin Crew Opportunities (Dubai Based, Relocation Provided)

Etisalat

<div><div>Maintenance Engineer Cairo.SO - (250002SF)</div><div>
Description<div></div> 
Job Purpose<div><div>
To handle maintenance trouble-tickets for network, enterprise and ADSL services to resolve it within a service level agreement to deliver an efficient and reliable service.</div> 
</div>
Report To Position Name<div><div><div>
Network Tasks:<ul><li>
Reviews the ticketing &amp; mailing systems for any reported network issue or alarm to handle within the committed SLA.</li><li>
Contacts the concerned Field Maintenance Engineer and follow all appropriate action needed within established maintenance standards.</li><li>
Contacts Network teams and share technical information about network actions and issues.</li><li>
Set a periodic preventive maintenance plan for network nodes in a predefined standards criterion.</li><li>
Ensures the clearance of any reported alarm or PM actions completion.</li><li>
Provide periodic reports for Network statistics, status and PM plan results to the Principle Engineer concerning a specific zone or time window.</li></ul>
Enterprise / ADSL Tasks:<ul><li>
Reviews the Enterprise ticketing system daily to handle the assigned complains and ensure resolving it with its SLA.</li><li>
Contacts the Technician-Team leader to assign the concerned Technician/ Sr.Technician/ IT Specialist.</li><li>
Contacts and follow up with the assigned Technician/ Sr.Technician/ IT Specialist.to handle the appropriate field action to resolve the customer technical issue.</li><li>
Gives a clearance feedback to Enterprise/ADSL customer.</li><li>
Updates the Ticketing system with the case status until closing it.</li><li>
Provide periodic reports to the Principal engineer about the Enterprise/ADSL task statistics and queue status.</li></ul>
Fixed-Voice Tasks:<ul><li>
Reviews the new assigned installation Fixed-voice tasks and set suitable plan with the Technician-Team Leader to complete the physical installation.</li><li>
Contacts the Technician/Sr.Technician to follow up the installation procedures and complete it.</li><li>
Emails Telecom Egypt officers with any action needed to facilitate the installation tasks.</li><li>
Update the requester customer during the task and confirm with him the task completion.</li></ul></div></div></div><div> 
</div></div><div>
Qualifications<div></div> 
QUALIFICATIONS_ESSENTIAL
Unniversity Degree in telecommunication engineering.
QUALIFICATIONS_DESIRABLE
Problem Solving:
Perform the technical troubleshooting procedures to diagnose and eliminate the problem root cause and find a technical solution for the case.
Planning Ahead:
Daily Plan for the Enterprise/ADSL tasks in advance with alignment with Technician-Team Leader.
Daily Plan for the Network activities with alignment with Network teams and FM Engineer.
Weekly/Monthly for the Network PM plan.
Innovation:
Figures out the best resolution for the repeated/chronic technical issues and get it permanently solved.
Skills &amp; Abilities:
Microsoft office
Communication skills
Work under pressure
Ability to work in teams
Fast response to all given tasks.
EXPERIENCE_ESSENTIAL
1-3 Years of experience.
EXPERIENCE_DESIRABLE
N/A
CERTIFICATIONS_ESSENTIAL
N/A<div> 
</div></div><div>
Job: Engineer</div><div>
Organization: NOL Business Group</div><div>
 Non-Management</div><div>
Job Posting: 10/Nov/2025, 10:23:05 AM</div></div>

Maintenance Engineer Cairo.SO

Al-Mansour Automotive

<div>
 
 
 Company Overview:
 
 
 
 Mac for Mobility Manufacturing (MMM) is a new, state-of-the-art automotive plant in New 6th of October City, specializing in the production of vehicles via the Completely Knocked Down (CKD) process. We are committed to excellence, safety, and building high-quality vehicles for our customers. Our operational excellence is built on two non-negotiable foundations:
 
 People Safety and Built-In Quality.
 
 Our core principle governs everything we do:
 
 Don't Build, Ship, or Sell a Defect.
 
 
 
 
 
 
 
 Position Summary:
 
 
 
 The General Assembly (GA) Shop Manager is the on-the-ground leader for our final assembly process. You are accountable for the "Don't Build, Ship, or Sell a Defect" principle in General Assembly. You will create a shop floor culture where every technician is safe to speak up, empowered to stop the line for a quality or safety concern, and takes personal ownership that no defect is built in GA, passed to the next station, or allowed to leave your shop.
 
 
 
 
 
 
 Key Responsibilities:
 
 
 <ul>
 <li>
 
 Safety &amp; People (Our Foundation):
 
 </li>
 <li>
 Create and maintain a zero-incident culture within the GA shop, ensuring compliance with all safety procedures, especially for lifting, electrical work, and vehicle movement.
 </li>
 <li>
 Ensure every assembly station is ergonomically sound and free from safety hazards. A comfortable technician is a quality-focused technician.
 </li>
 <li>
 
 People (Our assets):
 
 </li>
 <li>
 Directly lead, coach, and develop the GA supervisory team and all assembly technicians.
 </li>
 <li>
 Foster a culture of engagement, teamwork, and continuous improvement on the line.
 </li>
 <li>
 Foster a team that sees no distinction between a safety near-miss and a quality escape&mdash;both are critical signals to improve the process.
 </li>
 <li>
 </li>
 <li>
 
 Quality (Our Promise):
 
 </li>
 <li>
 
 Absolute owner of "Don't BUILD a Defect" in GA
 
 through In-Station Process Control and strict adherence to standardized work. Empower every technician to be a quality inspector.
 </li>
 <li>
 
 Ensure "Don't SHIP a Defect from GA"
 
 by validating the quality of every vehicle before it leaves the assembly line through rigorous final checks.
 </li>
 <li>
 
 Support "Don't SELL a Defect"
 
 by ensuring your shop's quality performance meets final customer requirements, preventing any assembly-related issues from reaching the customer.
 </li>
 <li>
 Serve as the first point of contact for GA-related quality issues, working closely with the Quality team and his team to implement containment and permanent corrective actions.
 </li>
 <li>
 Champion the rapid response to any Andon pull, focusing on true root cause to prevent repeat stops for the same issue.
 </li>
 <li>
 
 Productivity:
 
 </li>
 <li>
 Execute the daily production schedule for the GA shop, achieving target units per hour (UPH) and on-time completion.
 </li>
 <li>
 Monitor and improve key metrics like line speed, cycle time, and first-time-through (FTT).
 </li>
 <li>
 Collaborate with the Lean team to optimize line layout, material presentation, and workflow using lean tools.
 </li>
 <li>
 
 Cost:
 
 </li>
 <li>
 Manage the GA shop budget, controlling costs for labor, tools, and consumables.
 </li>
 <li>
 Minimize waste, damage, and rework costs within the assembly process.
 </li>
 <li>
 Ensure proper handling and usage of expensive components (e.g., infotainment systems, engines, transmissions).
 </li>
 <li>
 
 Environment:
 
 </li>
 <li>
 Ensure proper handling and disposal of wastes generated in GA (e.g., packaging, minor fluids, batteries).
 </li>
 <li>
 Comply with all environmental standards for the shop.
 </li>
 </ul>
 
 
 
 
 
 Qualifications &amp; Experience:
 
 
 <ul>
 <li>
 Associate or Bachelor's degree in Engineering (Mechanical, Industrial, Automotive) or a related field.
 </li>
 <li>
 Minimum of 5-7 years of experience in automotive assembly, with at least 3 years in a supervisory or management role within a General Assembly shop.
 </li>
 <li>
 Direct experience with CKD assembly processes is highly preferred.
 </li>
 <li>
 Strong knowledge of vehicle systems (electrical, powertrain, interior trim).
 </li>
 <li>
 Proven ability to troubleshoot assembly issues and implement countermeasures.
 </li>
 <li>
 Experience with lean manufacturing principles and a continuous improvement mindset.
 </li>
 </ul>
 
 
</div>

General Assembly Shop Manager

German International University

<div><div>Vacancy for: Faculty of Engineering
Scope &amp; Purpose 
 
Under direct supervision of the Head of the Mechanical Engineering department and general supervision of the engineering faculty, the Lab Technician provides supplemental support to small groups of students enrolled in the related undergraduate tutorials and labs. Employees in this classification will develop, organize, and support student activities in the lab sections with guidance/direction from the department&rsquo;s head and supervise student interactions. The Lab Technician will also be directly responsible for the upkeeping and maintenance of lab equipment. The Lab Technician for operating the designated machines. 
 
Essential Duties &amp; Responsibilities 
 
 
 
 
Promotes safety inside the laboratory
 
Prepares laboratory equipment on a weekly basis for related sections and practice hours 
Operates the laboratory equipment 
Expertise in Machining processes, Welding processes, Sheet metal processes and Casting processes. 
Sets and operates CNC machines 
Expertise in writing M/G code for CNC machines 
Trains and supervises other laboratory staff as needed 
Conducts functionality checks of critical lab equipment on a day to day basis 
Maintains, calibrates and tests all the equipment in the laboratory 
Undertakes in-house fixing of damages in the laboratory equipment when applicable 
Where necessary, liaises with the equipment vendors on matters of installation, and maintenance 
Remains available for various lab sessions throughout the semesters 
Updates equipment software from time to time as needed, with the help of IT 
Attends meetings as and when required
 
Undertakes other duties activities as assigned by the supervisor(s)
 
Perform inventory control and help in preparing quotations for existing and new equipment 
Supervise students&rsquo; workers in the lab and validates their time sheets 
Helps in organizing Capstone Design Projects, and other lab events 
Conducts orientation for new faculty members and TAs related to the existing equipment 
 
Qualifications
 
 
Certifications of expertise in CNC machines / Machining processes / Welding processes / Sheet metal processes / Casting processes. 
Diploma in Manufacturing or equivalent. Bachelor&rsquo;s degree in Mechanical Engineering or equivalent is preferred. 
 
Experience
 
 
At least three (3) years* of experience in handling a technical laboratory in an academic setting. 
 
Skills
 
 
Technical skills with manufacturing processes / production technology laboratory equipment 
Expertise in CAD/CAM
 
Computer skills
 
Knowledge of instruments related to measurements and material testing 
Written and spoken communication skills both in Arabic and English (German is a plus)
<div><div>Post Date: Monday, November 10, 2025</div></div> 
 
 
<div><div><div>Apply Now!</div></div></div></div></div>

Lab Technician – Manufacturing / Mechanical Engineering

Talent 360 ME

<div>
 
 About Us
 
 
 
 At Space Fitness Solutions, we are proud to be one of Egypt&rsquo;s leading distributors of premium commercial fitness equipment. Partnering with some of the world&rsquo;s most respected fitness brands, we deliver innovative solutions to the local market. Our commitment to service excellence positions us as a trusted fitness technology partner.
 
 
 Role Overview
 
 
 We are seeking a detail-oriented and technically skilled Maintenance Engineer &ndash; Fitness Equipment to join our Technical Services team. This role is critical in supervising maintenance operations, ensuring customer satisfaction, and analyzing service data to optimize performance. The Maintenance Engineer will oversee technician performance, support preventive and corrective maintenance activities, and contribute to service quality improvements.
 
 
 Key Responsibilities
 
 
 <ul>
 <li>
 Analyze technical documentation, including manuals and schematics, to ensure accurate installation, maintenance, and troubleshooting of fitness equipment.
 </li>
 <li>
 Supervise and guide field technicians to maintain high service standards.
 </li>
 <li>
 Monitor and evaluate technician performance through regular reviews, site visits, and feedback analysis.
 </li>
 <li>
 Interpret customer maintenance reports to identify recurring issues, service trends, and opportunities for improvement.
 </li>
 <li>
 Review and verify spare parts requirements based on service data and usage patterns.
 </li>
 <li>
 Support the development and execution of preventive maintenance schedules.
 </li>
 <li>
 Act as a point of escalation for complex technical service issues.
 </li>
 <li>
 Collaborate with customer service teams to ensure timely responses to service requests.
 </li>
 <li>
 Maintain accurate records of service activities, spare parts usage, and customer interactions.
 </li>
 <li>
 Deliver training and technical support to technicians on MATRIX Fitness equipment and updated service practices.
 </li>
 <li>
 Contribute to service improvement initiatives to enhance customer satisfaction and operational efficiency.
 
 
 
 </li>
 </ul>
 
 Qualifications &amp; Requirements
 
 
 
 <ul>
 <li>
 Bachelor&rsquo;s degree or diploma in Mechanical, Electrical Engineering.
 </li>
 <li>
 0-2 years of experience in technical service or maintenance, preferably with fitness or electromechanical equipment.
 </li>
 <li>
 Fluent in English (spoken and written); confident communicator and presenter.
 </li>
 <li>
 Prior supervisory or lead technician experience is preferred.
 </li>
 <li>
 Strong analytical skills with the ability to interpret service data and maintenance reports.
 </li>
 <li>
 Excellent communication and leadership abilities.
 </li>
 <li>
 Good understanding of fitness equipment functionality and technical specifications.
 </li>
 <li>
 Familiarity with spare parts planning and inventory coordination.
 </li>
 <li>
 Proficient in Microsoft Excel, service management tools, or ERP systems.
 </li>
 <li>
 Valid driver&rsquo;s license with flexibility to travel to customer sites.
 
 
 
 </li>
 </ul>
 
 Preferred Skills
 
 
 
 <ul>
 <li>
 Knowledge of commercial fitness equipment and related technologies.
 </li>
 <li>
 Customer-focused mindset with a proactive problem-solving approach.
 </li>
 <li>
 Basic understanding of networked fitness systems and diagnostic tools.
 
 
 
 </li>
 </ul>
 Work Conditions
 
 
 <ul>
 <li>
 Location: Mohandseen, Cairo, Egypt
 </li>
 <li>
 Working Hours: 8 Hours (9:00 AM - 5:00 PM / 10:00 AM - 6:00 PM)
 </li>
 <li>
 Working Days: 5 Days (On Site)
 </li>
 <li>
 Days Off: Fridays &amp; Saturdays
 </li>
 <li>
 Company: Space Fitness Solutions &ndash; Egypt&rsquo;s Premier Distributor of Commercial Fitness Equipment
 </li>
 </ul>
</div>

Maintenance Engineer [Fitness Equipment]

HSE Contractors Inc

Mechanical Heavy Equipment Technician &ndash; Marsa Alam (Gold &amp; Diamond Drilling)Requirements:Minimum 3 years of experience in heavy equipment maintenance and repairExperience in drilling or mining projects is an advantageWilling to work on remote sites (underground &amp; surface)Location: Marsa Alam, Egypt To apply,send your CV to: Rec.uni2@uni-serve.meJob Type: Full-timePay: E&pound;15,000.00 - E&pound;25,000.00 per month

Heavy Equipment Mechanical Technician

Explore 30+ Aircraft technician in Egypt this November. Find roles across top companies and apply now to boost your career.