civil engineer

qa/qc engineer

architectural inspector

environmental inspector

civil inspector

certified welding inspector

EMKAN ENGINEERING

Job Summary:We are seeking a CSWIP 3.2.2 Certified QC Inspector &ndash; Welding to oversee and ensure quality compliance of all fabrication and welding activities carried out in the fabrication workshop, in accordance with approved drawings, WPS, client specifications, and applicable international standards.Key Responsibilities:<ul><li>Inspect and monitor fabrication and welding activities in the workshop as per approved WPS, ITP, QCP, and fabrication drawings.</li><li>Perform visual inspection (VT) of materials, joint fit-up, welding, and completed welds.</li><li>Verify welder qualifications (WPQ) and ensure compliance with approved procedures.</li><li>Ensure proper control, storage, baking, and traceability of welding consumables.</li><li>Check material identification, heat numbers, and traceability throughout fabrication stages.</li><li>Monitor preheat, inter-pass temperature, and post-weld requirements.</li><li>Coordinate and witness NDT activities (RT, UT, MT, PT) within the workshop.</li><li>Review and verify NDT reports against applicable acceptance criteria.</li><li>Raise NCRs, follow up corrective actions, and ensure closure.</li><li>Maintain weld maps, inspection reports, NDT logs, and quality dossiers.</li><li>Liaise with client inspectors, third-party agencies, and production teams.</li><li>Support internal and external quality audits related to fabrication activities.</li></ul>Qualifications &amp; Certifications:<ul><li>CSWIP 3.2.2 Welding Inspector Certification &ndash; Mandatory</li><li>Diploma or Degree in Mechanical / Metallurgical Engineering or equivalent</li><li>Additional NDT Level II certifications are an advantage</li></ul>Experience Requirements:<ul><li>Minimum 5 years of experience as a Welding QC Inspector in a fabrication workshop</li><li>Experience in piping, structural steel, skids, tanks, pressure parts fabrication</li><li>Exposure to Oil &amp; Gas, Petrochemical, or Industrial fabrication projects preferred</li></ul>Technical Knowledge:<ul><li>Welding processes: SMAW, GTAW, GMAW, FCAW, SAW</li><li>Codes &amp; Standards: ASME Sec IX, ASME B31.3, AWS D1.1, API, ISO</li><li>Ability to read and interpret fabrication drawings and welding symbols</li></ul>Skills &amp; Competencies:<ul><li>Strong inspection, documentation, and reporting skills</li><li>Good coordination with workshop production teams</li><li>Attention to detail and quality-focused mindset</li><li>Ability to work independently</li></ul>Job Type: Full-timeWork Location: In person

QC Inspector (CSWIP 3.2.2 Certified)

Inspec Energy Trading and Contracting WLL

Position: Welding InspectorLocation: QatarContract Duration: 6 months (extendable based on project requirements)Working Hours: 10 hours/day, 6 days/weekMobilization: Immediate after interviewJob Overview:We are seeking a highly skilled Welding Inspector to join our client&rsquo;s project in Qatar. The ideal candidate will have strong technical expertise in welding inspection, with extensive oil &amp; gas sector experience and recognized certification.Key Responsibilities:Conduct welding inspections as per project specifications, codes, and standards.Ensure compliance with approved welding procedures, WPS, and international codes.Verify welder qualifications and monitor performance during welding activities.Review and maintain welding-related documentation, reports, and quality records.Identify non-conformities and recommend corrective actions.Liaise with client representatives, site supervisors, and QA/QC team for quality assurance.Qualifications &amp; Requirements:Diploma or higher in Mechanical Engineering.Minimum 7+ years of experience in oil &amp; gas industry.Experience with fabrication of offshore structures like modules, topside, platforms is mandatory.AWS or CSWIP 3.1 certification is mandatory.Strong knowledge of international welding codes and standards.Excellent communication and reporting skills.Employment TermsSalary: Competitive (inclusive of all benefits, including leave salary &amp; gratuity).Type: Contract Basis.Job Type: Contract Contract length: 6 monthsPay: QAR12,000.00 - QAR18,000.00 per month

Welding Inspector with Offshore Structure experience

CRESCITA Contracting

The QC (Quality Control) Inspector &ndash; Piping &amp; Welding is responsible for ensuring all piping fabrication, welding, and related construction activities comply with applicable codes, project specifications, and quality standards. The role involves conducting inspections, reviewing documentation, ensuring proper material traceability, and verifying that all work meets safety and quality requirements.Key Responsibilities1. Inspection &amp; Quality Assurance<ul><li>Perform fit-up, dimensional, and visual inspections on piping spools and welded joints.</li><li>Conduct in-process and final inspection of welding activities according to WPS (Welding Procedure Specifications).</li><li>Verify compliance with applicable codes such as ASME, API, AWS, and project-specific standards.</li><li>Ensure proper welding consumables handling and storage.</li><li>Inspect material identification, heat numbers, and traceability.</li></ul>2. Documentation &amp; Reporting<ul><li>Prepare inspection reports, punch lists, and non-conformance reports (NCRs).</li><li>Review and approve WPS, PQR, and welder qualification records.</li><li>Maintain all QC records, including weld logs, test certificates, and inspection forms.</li><li>Ensure proper documentation for hydro-test, pneumatic test, and reinstatement activities.</li></ul>3. Coordination &amp; Communication<ul><li>Coordinate inspections with construction, welding supervisors, NDT teams, and clients.</li><li>Monitor NDT (RT, UT, MPI, DPI) activities and verify results.</li><li>Attend project quality meetings and provide updates on inspection status.</li><li>Assist QA/QC Lead in quality-related audits.</li></ul>4. Technical Oversight<ul><li>Verify correct pipe preparation, joint configuration, and weld parameters.</li><li>Check alignment, orientation, and dimensional tolerance per engineering drawings.</li><li>Monitor welder performance and report any deviations.</li><li>Ensure correct application of welding processes (SMAW, GTAW, FCAW, etc.).</li></ul>Qualifications &amp; SkillsEducation &amp; Certifications<ul><li>Diploma/Degree in Mechanical Engineering or related field.</li><li>CSWIP 3.1 / AWS-CWI certification (preferred).</li><li>NDT Level II in RT/UT/MPI/DPI desirable.</li><li>Knowledge of ASME Section IX, B31.3, B31.1, API standards.</li></ul>Technical Skills<ul><li>Strong understanding of welding processes, metallurgy, and fabrication practices.</li><li>Ability to read and interpret engineering drawings, isometrics, and P&amp;IDs.</li><li>Familiar with QA/QC procedures, inspection techniques, and test requirements.</li></ul>Soft Skills<ul><li>Good communication and coordination abilities.</li><li>Attention to detail and strong analytical skills.</li><li>Ability to work independently and under pressure.</li></ul>Experience<ul><li>5-7 years of experience in piping, welding inspection, or construction QC roles.</li><li>Experience in oil &amp; gas, petrochemical, power plant, or related industries is an advantage.</li></ul>Job Types: Temporary, Contract Contract length: 6 monthsPay: From QAR7,000.00 per monthLocation:<ul><li>Doha (Required)</li></ul>

QC Inspector - Piping & welding - CSWIP 3.1

AL SANPOK TRADING, SERVICES & CONTRACTING CO

We are hiring for QC Inspectors - (Welding) for an Oil&amp;Gas project. - Must be readily available in Qatar. - Valid QID and NOC documents to apply for Gate Pass. - Minimum 8 years of experience in relavent roles. - CSWIP 3.1 Certificate MandatoryJob Type: Full-timePay: From QAR10,000.00 per month

QC Inspector- Welding

DIME INTERNATIONAL MECHANICAL ENGINEERING

Objective of the RoleThe Quality Inspector &ndash; Multi Discipline is responsible for supporting the Lead QA/QC Engineer in implementing the QA/QC plan and ensuring that all project activities comply with inspection and testing requirements. The role covers welding, materials, piping, and painting/coating inspections, as well as reviewing reports, monitoring site quality, and coordinating with clients and contractors.Key Responsibilities<ul><li>Conduct in-process and final inspections for welding, painting, and dimensional control.</li></ul><ul><li>Prepare, Review and verify Welding Procedure Specifications (WPS), PQRs, and Welder Qualifications (WQT) in accordance with project requirements.</li></ul><ul><li>Monitor welding parameters and ensure compliance with ASME, AWS, or other applicable standards.</li></ul><ul><li>Carry out surface preparation and painting inspection in line with BGAS/NACE standards, including DFT, WFT, climate condition checks, and holiday testing.</li></ul><ul><li>Review and verify Material Test Certificates (MTC), consumables, and storage practices.</li></ul><ul><li>Issue and follow up on Non-Conformance Reports (NCRs), Site Instructions, and implement Corrective &amp; Preventive Actions (CAPA).</li></ul><ul><li>Maintain and update inspection and test records, ITPs, and quality logs.</li></ul><ul><li>Participate in internal and external audits, including client and third-party inspections.</li></ul><ul><li>Coordinate with Engineering, Production, and Project Teams to ensure smooth inspection workflows.</li></ul><ul><li>Ensure proper documentation and traceability for all QC activities, including test packages and handover dossiers.</li></ul><ul><li>Promote a culture of quality awareness and continuous improvement within the fabrication shop.</li></ul>Qualifications &amp; Certifications:<ul><li>Diploma/Degree in Mechanical Engineering or equivalent.</li></ul><ul><li>Certified CSWIP 3.1 / 3.2 (Welding Inspector).</li></ul><ul><li>Certified BGAS Grade 2 / NACE Level 1 or 2 (Coating Inspector).</li></ul><ul><li>Familiar with QCS, ISO 9001, ASME, API, AWS, BS/EN, and project-specific standards.</li></ul>Job Types: Full-time, Permanent

QA/QC ENGINEER MULTI

Atlas Dias

Position : Piping InspectorLocation: Mesaieed, QatarContract: 3&ndash;4 months (extendable)Requirements:CSWIP 3.1 certifiedExperience in CRE, Carbon Steel &amp; Rotating EquipmentQatar Energy approval mandatoryGood English communicationResponsibilities:Inspect mechanical equipment and pipingCheck welding, fabrication, and installation qualityPrepare inspection reports and NCRsEnsure compliance with project standards and codesJob Types: Full-time, Contract Contract length: 4 monthsApplication Question(s):<ul><li>Do you have a freelance visa?</li><li>Do you require any Notice period? </li></ul>Experience:<ul><li>Piping Inspector : 10 years (Preferred)</li></ul>License/Certification:<ul><li>CSWIP 3.1 Certificate (Preferred)</li><li>Qatar Energy Approval (Preferred)</li></ul>

Piping Inspector - CSWIP 3.1

We are Hiring:Job Title: QA/QC Mechanical Inspector &ndash; 3 PositionsLocation: Mesaieed, QatarContract: 3&ndash;4 months (extendable)Requirements:CSWIP 3.1 / 3.2 certifiedExperience in CRE, Carbon Steel &amp; Rotating EquipmentQatar Energy approval mandatoryGood English communicationResponsibilities:Inspect mechanical equipment and pipingCheck welding, fabrication, and installation qualityPrepare inspection reports and NCRsEnsure compliance with project standards and codesJob Types: Full-time, Contract Contract length: 4 monthsPay: QAR10,000.00 - QAR14,000.00 per monthApplication Question(s):<ul><li>Do you have a freelance visa?</li><li>Do you require any notice period? If, yes how many days? </li></ul>Experience:<ul><li> QA/QC Mechanical Inspector: 10 years (Preferred)</li></ul>License/Certification:<ul><li>CSWIP 3.1 or 3.2 Certificate (Preferred)</li><li>Qatar Energy approval (Preferred)</li></ul>

QA/QC Mechanical Inspector

Explore 163+ Certified welding inspector in Doha this January. Find roles across top companies and apply now to boost your career.