age electrical supervisor

e&i maint. engineer

electrical technician

electrical engineers

CRESCITA Contracting

Job SummaryWe are seeking a qualified Electrical Engineer with hands-on experience in medium-voltage switchgear and UPS systems (up to 3.3 kV). The role involves supporting OEM activities, supervising schematics, control wiring, and site execution, and ensuring compliance with technical and safety standards.Key Responsibilities<ul><li>Support switchgear and UPS OEMs during engineering, manufacturing, and site activities</li><li>Review, verify, and supervise electrical schematics, wiring diagrams, and control circuits</li><li>Supervise control wiring, panel wiring, and interconnections for 3.3 kV systems</li><li>Coordinate with OEM engineers, site teams, and contractors for technical clarifications</li><li>Ensure compliance with IEC/IEEE standards, project specifications, and safety regulations</li><li>Participate in FAT, SAT, testing, commissioning, and troubleshooting activities</li><li>Identify design or wiring issues and propose corrective actions</li><li>Prepare and review technical documentation, reports, and as-built drawings</li><li>Provide on-site supervision and technical support during installation and commissioning</li></ul>Required Qualifications &amp; Skills<ul><li>Bachelor&rsquo;s Degree in Electrical Engineering or equivalent</li><li>Proven experience with MV switchgear and UPS systems (up to 3.3 kV)</li><li>Strong knowledge of electrical schematics, control wiring, protection, and interlocking</li><li>Experience working directly with OEMs</li><li>Familiarity with testing &amp; commissioning of switchgear and UPS systems</li><li>Ability to read and interpret single-line diagrams, wiring diagrams, and GA drawings</li><li>Good understanding of electrical safety practices and standards</li><li>Strong communication and coordination skills</li></ul>Preferred Qualifications<ul><li>Experience with major switchgear/UPS OEMs</li><li>Site supervision experience in industrial, utility, or data center projects</li><li>Knowledge of PLC, relays, and protection systems</li></ul>Job Type: Full-time

Electrical Engineers

Job SummaryWe are looking for a skilled Electrical Technician with strong hands-on experience in panel wiring, cable glanding, and termination. The ideal candidate will support installation and execution activities for electrical panels and systems, ensuring quality workmanship, safety compliance, and adherence to drawings and standards.Key Responsibilities<ul><li>Execute panel internal wiring as per approved electrical schematics and wiring diagrams</li><li>Perform cable glanding and termination for power and control cables</li><li>Install and terminate cables in LV/MV panels, control panels, and UPS panels</li><li>Identify cables, ferrule wires, and ensure proper labeling as per standards</li><li>Ensure correct tightening, routing, dressing, and segregation of cables</li><li>Follow electrical safety procedures and site HSE requirements</li><li>Assist in testing, continuity checks, and pre-commissioning activities</li><li>Coordinate with supervisors and engineers for technical clarifications</li><li>Report workmanship issues and rectify wiring or termination defects</li></ul>Required Qualifications &amp; Skills<ul><li>ITI / Diploma in Electrical or equivalent qualification</li><li>Proven experience in panel wiring, glanding, and termination</li><li>Ability to read and understand electrical wiring diagrams and schematics</li><li>Experience with power and control cable termination</li><li>Knowledge of industrial electrical tools, crimping, and torque practices</li><li>Familiarity with electrical safety standards and PPE usage</li><li>Ability to work independently and as part of a team</li></ul>Preferred Qualifications<ul><li>Experience in switchgear, UPS, MCC, or control panels</li><li>Site experience in industrial plants, infrastructure, or data centers</li><li>Exposure to testing and commissioning support</li></ul>Job Type: Full-time

Electrical Technician

QatarEnergy

Primary Purpose of the Job: 
Plan all (Elect / Inst) maintenance/preventive and refurbishment works, conduct feasibility/technical studies of maintenance works and assist in new tenders and existing contracts and timely execution of services in compliances with HSE and Civil Defence requirements as advised by superiors. Supervise subordinates and contractor workforces to achieve scheduled objectives.
 
Required Experience and Skills: 
10 years experience in electrical and/or Instrumentation maintenance work out of which at least 5 years in a Senior position as Electrical Engineer dealing with costs, budgets and contracts and familiar with preparation of tender specifications, associated standards pertaining to local and international regulations. Experience of construction / maintenance works in GCC / Qatar and familiarity with works in oil and gas sector is desirable.
 
Educational Qualifications: 
Bachelor Degree in Electrical or Instrument Engineering with good communication and computer skills.

E&I MAINT. ENGINEER

BAE Systems

<div>
 
 The AGE Electrical Supervisor reports to the
 
 
 Mechanical Workshop Controller and is
 
 
 an
 
 
 experienced and skilled supervisor, undertaking a range of detailed maintenance
 
 
 activities in the AGE bay demonstrating the ability to derive diagnostic electronic
 
 
 techniques.
 
 
 
 
 The
 
 
 post holder will be responsible for maintaining airworthiness through
 
 
 appropriate task delegation and authorisation on the electrical/ electronic AGE
 
 
 activities, and will be able to demonstrate awareness of broader external dependencies
 
 
 and identifies areas for continuous improvement.
 
 
 
 
 Core Activity
 
 
 
 <ul>
 <li>
 Undertaking detailed maintenance, inspection and supervision activities on the Electrical components in the AGE bay. Assuring work carried out has been completed in accordance with the work package using the relevant approved technical information. Resolving faults and maintenance issues, including an awareness of configuration management
 </li>
 <li>
 Undertaking and complete tasked maintenance &amp; diagnostic activities of Electrical components in the AGE bay which may include, as appropriate, component removals, inspections, repairs, modifications, fault rectifications, replacements and/or functional/system test. Demonstrates a flexible and proactive attitude to carrying out responsibilities appropriate to the role and takes direction appropriately
 </li>
 <li>
 Maintaining personal &amp; teams task authorisation for working on an aircraft AGE in accordance with regulatory requirements
 </li>
 <li>
 Ensuring staff are sufficiently competent and approved for the maintenance tasks allocated to them. Maintain personal &amp; teams task authorisation for working on components in accordance with AMC requirements
 </li>
 <li>
 Undertaking electrical support tasks within the AGE bay facility which are required to maintain compliance with the MOE and regulatory procedures (e.g. oversight checks, control of tooling / test equipment)
 </li>
 <li>
 Undertaking fault evaluation and raise ad hoc work cards for &lsquo;found faults&rsquo; during maintenance
 </li>
 <li>
 Responsible for meeting agreed delivery targets in the short to medium term through the supervision of others. Progress reporting against delivery targets to management.
 </li>
 <li>
 Maintaining a personal Log Book to demonstrate currency and recency, on completion of On the Job training (OJT) activities, sign other personnel&rsquo;s logbooks as appropriate within your trade and skills boundaries. If you are an approved designated assessor, undertake authorisation and task competency approvals, and check Pt 145 license application packs prior to submission
 </li>
 <li>
 Provide guidance and leadership to the team. Develop the team members using formal assessment processes, e.g. Performance Reviews, supports and sponsors training requests including &lsquo;on the job training&rsquo;. Demonstrates sound and comprehensive communication and people management skills in order to exchange complicated information.
 </li>
 <li>
 Ensuring timely Supervision of all maintenance activities including Technical Instructions related to electrical Aircraft Ground Equipment.
 
 
 </li>
 </ul>
 
 Key Accountabilities
 
 
 
 <ul>
 <li>
 Performance indicators &ndash; Ensure the effective management of Regulatory activities by setting delivery targets, monitoring progress and developing performance improvement programmes. Prioritises activities within/across teams to maximise efficiency. Responsible for the assessment of escalated issues for any impact on continuing airworthiness and generating effective resolution, or sponsoring escalation to management
 </li>
 <li>
 Procedure/standards &ndash; Comply with the regulatory framework, its associated procedures and standards and any other company procedures and standards, as applicable. Identify and propose changes, as required
 </li>
 <li>
 Safety Management System &ndash; Promote the application of human factors, error management, risk management and safety assurance within the Part 145 team, together with the proactive analysis, mitigation and management of hazards
 </li>
 <li>
 Completion of Activities &ndash; Ensure all Part 145 activities are appropriately documented and airworthiness records are maintained on relevant systems (IT/paper based). Ensure all Part 145 activities are performed by suitably qualified, experienced and authorised personnel. Provide support and guidance to the team
 </li>
 <li>
 Management System Assurance &ndash; Ensure maintenance activities are compliant with the Governance and Assurance framework, including supporting Process confirmations and independent assurance audits. Support the response to audit findings in a timely and appropriate manner and provide information to support the relevant reviews. Support the implementation of identified improvements to overcome any non-compliance and monitor effectiveness
 </li>
 <li>
 Statutory/Regulatory &amp; Legislative requirements &ndash; Able to demonstrate an appropriate level of understanding and application of the relevant continuing airworthiness regulatory framework. Support the implementation of any regulatory driven changes into the maintenance activities. Ensure compliance with all other requirements, e.g. ITAR, EaPW, ISO
 </li>
 <li>
 Contractual Requirements &ndash; Comply with all applicable contractual requirements
 
 
 </li>
 </ul>
 
 Requirements
 
 
 
 <ul>
 <li>
 Completion of an Engineering Apprenticeship, ideally in Aeronautical Engineering or
 
 
 </li>
 </ul>
 
 Military Equivalent Apprenticeship / Qualifications. Academic Qualification For
 
 
 
 this role is a minimum of City &amp; Guilds 2675 or 2661 in Aeronautical
 
 
 Engineering and Maintenance or equivalent
 
 
 <ul>
 <li>
 Requires a minimum of 2 years working at Supervisor level prior to undertaking this role.
 </li>
 <li>
 Experienced and competent leader at this level.
 </li>
 <li>
 Demonstrating breadth of experience, currency &amp; recency capturing skills, knowledge and authorities
 </li>
 <li>
 Practical experience and expertise in the application of aviation safety standards and safe operating practices.
 </li>
 <li>
 A comprehensive knowledge of Expositions, Functionally Mandated Procedures and Management training.
 </li>
 <li>
 Leadership &ndash; Foundation.
 </li>
 <li>
 Human Factors- Standard Course Specification.
 </li>
 <li>
 E&amp;PW Awareness- Standard Course Specification.
 </li>
 <li>
 ITAR Awareness- Standard Course Specification.
 </li>
 <li>
 IT Literate
 </li>
 <li>
 Fire Training Awareness
 </li>
 <li>
 On the Job Training Instructional Techniques
 </li>
 <li>
 Driving license
 </li>
 </ul>
</div>

AGE Electrical Supervisor

<div><div>The AGE Electrical Supervisor reports to the 
Mechanical Workshop Controller and is an 
experienced and skilled supervisor, undertaking a range of detailed maintenance 
activities in the AGE bay demonstrating the ability to derive diagnostic electronic 
techniques.</div> 
<div></div>
<div>
The 
post holder will be responsible for maintaining airworthiness through 
appropriate task delegation and authorisation on the electrical/ electronic AGE 
activities, and will be able to demonstrate awareness of broader external dependencies 
and identifies areas for continuous improvement.</div>
<div></div><div>Core Activity</div>
<ul><li>Undertaking detailed maintenance, inspection and 
supervision activities on the Electrical components in the AGE bay. Assuring 
work carried out has been completed in accordance with the work package using 
the relevant approved technical information. Resolving faults and maintenance 
issues, including an awareness of configuration management 
</li>
<li>Undertaking and complete tasked maintenance &amp; 
diagnostic activities of Electrical components in the AGE bay which may 
include, as appropriate, component removals, inspections, repairs, 
modifications, fault rectifications, replacements and/or functional/system 
test. Demonstrates a flexible and proactive attitude to carrying out 
responsibilities appropriate to the role and takes direction appropriately 
</li>
<li>Maintaining personal &amp; teams task authorisation for 
working on an aircraft AGE in accordance with regulatory requirements 
</li>
<li>Ensuring 
staff are sufficiently competent and approved for the maintenance tasks 
allocated to them. Maintain personal &amp; teams task authorisation for working 
on components in accordance with AMC requirements 
</li>
<li>Undertaking electrical support tasks within the AGE bay 
facility which are required to maintain compliance with the MOE and regulatory procedures (e.g. oversight checks, 
control of tooling / test equipment) 
</li>
<li>Undertaking fault evaluation and raise ad hoc work cards 
for &lsquo;found faults&rsquo; during maintenance 
</li>
<li>Responsible 
for meeting agreed delivery targets in the short to medium term through the 
supervision of others. Progress reporting against delivery targets to management. 
</li>
<li>Maintaining a 
personal Log Book to demonstrate currency and recency, on completion of On the 
Job training (OJT) activities, sign other personnel&rsquo;s logbooks as appropriate 
within your trade and skills boundaries. If you are an approved designated assessor, 
undertake authorisation and task competency approvals, and check Pt 145 license 
application packs prior to submission 
</li>
<li>Provide 
guidance and leadership to the team. Develop the team members using formal 
assessment processes, e.g. Performance Reviews, supports and sponsors training 
requests including &lsquo;on the job training&rsquo;. Demonstrates sound and comprehensive 
communication and people management skills in order to exchange complicated 
information.</li>
<li>Ensuring timely Supervision of all maintenance 
activities including Technical Instructions related to electrical Aircraft 
Ground Equipment.</li>
</ul><div></div><div>Key Accountabilities</div>
<ul><li>Performance 
indicators &ndash; Ensure the effective 
management of Regulatory activities by setting delivery targets, monitoring 
progress and developing performance improvement programmes. Prioritises 
activities within/across teams to maximise efficiency. Responsible for the 
assessment of escalated issues for any impact on continuing airworthiness and 
generating effective resolution, or sponsoring escalation to management 
</li>
<li>Procedure/standards &ndash; Comply with the regulatory framework, its associated 
procedures and standards and any other company procedures and standards, as 
applicable. Identify and propose changes, as required 
</li>
<li>Safety 
Management System &ndash; Promote the application of human factors, error management, risk 
management and safety assurance within the Part 145 team, together with the 
proactive analysis, mitigation and management of hazards 
</li>
<li>Completion of 
Activities &ndash; Ensure all 
Part 145 activities are appropriately documented and airworthiness records are 
maintained on relevant systems (IT/paper based). Ensure all Part 145 activities 
are performed by suitably qualified, experienced and authorised personnel. 
Provide support and guidance to the team 
</li>
<li>Management 
System Assurance &ndash; Ensure maintenance activities 
are compliant with the Governance and Assurance framework, including supporting 
Process confirmations and independent assurance audits. Support the response to 
audit findings in a timely and appropriate manner and provide information to 
support the relevant reviews. Support the implementation of identified 
improvements to overcome any non-compliance and monitor effectiveness 
</li>
<li>Statutory/Regulatory &amp; Legislative 
requirements &ndash; Able to demonstrate an appropriate level of understanding 
and application of the relevant continuing airworthiness regulatory framework. Support the implementation of any regulatory 
driven changes into the maintenance activities. Ensure compliance with all 
other requirements, e.g. ITAR, EaPW, ISO 
</li>
<li>Contractual Requirements &ndash; 
Comply with all applicable contractual requirements</li></ul><div></div> 

<h3 class="jobSectionHeader">Requirements</h3>
<ul><li>Completion 
of an Engineering Apprenticeship, ideally in Aeronautical Engineering or 
Military equivalent apprenticeship / qualifications. Academic qualification for 
this role is a minimum of City &amp; Guilds 2675 or 2661 in Aeronautical 
Engineering and Maintenance or equivalent 
</li>
<li>Requires 
a minimum of 2 years working at Supervisor level prior to undertaking this 
role. 
</li>
<li>Experienced 
and competent leader at this level.
 
</li><li>Demonstrating 
breadth of experience, currency &amp; recency capturing skills, knowledge and 
authorities 
</li>
<li>Practical 
experience and expertise in the application of aviation safety standards and 
safe operating practices. 
</li>
<li>A comprehensive 
knowledge of Expositions, Functionally Mandated Procedures and Management 
training. 
</li>
<li>Leadership 
&ndash; Foundation. 
</li>
<li>Human Factors- Standard Course 
Specification. 
</li>
<li>E&amp;PW Awareness- Standard Course 
Specification. 
</li>
<li>ITAR Awareness- Standard Course 
Specification. 
</li>
<li>IT Literate 
</li>
<li>Fire 
Training Awareness 
</li>
<li>On 
the Job Training Instructional Techniques 
</li>
<li>Driving license</li></ul></div>

Explore 5+ Electrical engineers in Dukhan this February. Find roles across top companies and apply now to boost your career.

5 electrical engineers jobs IN Dukhan

Electrical Engineers

Electrical Technician

E&I MAINT. ENGINEER

AGE Electrical Supervisor

AGE Electrical Supervisor