mechanical engineer

design engineer - wet utilities Jobs in Bahrain

design engineer - wet utilities

electrical & instrumentation engineer Jobs in Bahrain

electrical & instrumentation engineer

engineering technician

solution engineer

electrical instrumentation engineer

Bilfinger Middle East

<div>
 In the Middle East, Bilfinger is one of the leading service providers of engineering and consultancy services, project management, construction, maintenance O&amp;M and life cycle services. We enhance the efficiency of our client&rsquo;s assets, ensure a high level of availability and reduce maintenance costs. With our 4.000 employees, we are a leading German corporation where engineering excellence, safety and quality are part of our DNA. With four entities in the Middle East (Bilfinger Tebodin Middle East, Bilfinger Deutsche Babcock Emirates, Babcock Borsig Service Arabia, Babcock Borsig Steinm&uuml;ller Kuwait) and over 10 offices across the region, we offer job opportunities that allow you to utilize all your knowledge and experience. Are you looking for a chance to put your skills to their best-possible use? Then we have what you are looking for!
 
 
 
 Job Accountabilities/ Responsibilities:
 
 
 
 <ul>
 <li>
 The Electrical and Instrumentation Construction Supervisor is responsible for supervising all the E&amp;I construction activities at the project site, ensuring they are executed safely, efficiently, and in accordance with Company Standards, Project Specifications, Design drawings &amp; industry standards.
 </li>
 <li>
 A key responsibility of this role is the preparation and verification of redline mark-up drawings to reflect actual site modifications, ensuring alignment between construction and design deliverables documents.
 </li>
 <li>
 Review issued-for-construction (IFC) drawings and identify any design inconsistencies or constructability issues.
 </li>
 <li>
 Prepare, update, and maintain redline mark-up drawings to accurately capture all field modifications and deviations from IFC drawings.
 </li>
 <li>
 Coordinate with Construction, Engineering and design teams to review mark-ups and incorporate them into final as-built drawings.
 </li>
 <li>
 Verify that all changes made on-site are properly documented and approved according to project change management procedures.
 </li>
 <li>
 Ensure all redline updates are completed before project close-out and commissioning.
 </li>
 <li>
 Conduct joint inspections with QA/QC and client representatives for completed works.
 </li>
 <li>
 Support pre-commissioning and commissioning activities for electrical and instrumentation systems
 </li>
 <li>
 Participate in design reviews, constructability assessments, and field engineering discussions.
 </li>
 <li>
 EDDR / Master Engineering Documents Identification, Vendor Packages &amp; Documents Identification based on the Project Requirements.
 
 
 </li>
 </ul>
 To apply, please submit your CV in English through the system, containing as a minimum your contact details, education level, relevant experience and earliest possible start date.
 
 
 Any applicant must be aware that the selection of candidates is at the sole discretion of the employer. Applicants will not receive any communication unless they are selected for an interview. Only applicants that have responded to vacancies through the online form will be considered.
 
 
</div>

Electrical & Instrumentation Engineer

Virtu Thinko

Cybersecurity Control Engineer LocationKSA and BahrainEmployment Type[Full-time / Contract / Project-Based]Role PurposeWe are seeking an enthusiastic Instrumentation &amp; Control (I&amp;C) Engineer with strong hands-on experience in industrial control and safety systems and experience in OT cybersecurity principles. The role is execution-focused and supports live plant, commissioning, and brownfield environments across vendor-neutral DCS, PLC, and SIS platforms.OT Cybersecurity &amp; Risk Collaboration- Act as a technical interface between OT engineering, cybersecurity, and operations teams. - Support implementation of IEC 62443 principles (zones, conduits, defense-in-depth) from an engineering perspective. - Provide engineering validation for OT security monitoring alerts, anomalies, or incidents. - Support secure system migrations, upgrades, and remote engineering access.Embedded OT Cybersecurity Responsibilities- Ensure secure configuration baselines for controllers, HMIs, engineering workstations, and OT servers. - Validate user access controls, role-based privileges, and segregation of duties. - Enforce disciplined change management for logic, configuration, and HMI modifications. - Identify cyber-related risks impacting safety, availability, and operational reliability.OT Cybersecurity Awareness (Applied)- Understanding of OT-specific threat scenarios affecting control and safety systems. - Familiarity with IEC 62443 concepts at an engineering awareness level. - Awareness of secure remote access, patching constraints, and operational risk in OT environments.Control &amp; Safety Systems Engineering- Perform controller-to-field communication setup and verification, including redundant and fault-tolerant architectures (e.g., TMR). - Verify and reconcile controller databases with field instrumentation and HMI configurations. - Ensure consistency across controllers, applications, networks, and HMI layers in line with project engineering standards.Loop Checking &amp; Commissioning- Execute end-to-end loop checks from field instruments through marshaling, I/O, controllers, and HMIs. - Validate signal scaling, alarms, trips, interlocks, and fail-safe behavior. - Support FAT, SAT, pre-commissioning, and commissioning activities. - Document loop check results, deviations, punch lists, and corrective actions.HMI Configuration &amp; Modification- Perform HMI graphics updates, tag configuration, and display logic modifications. - Configure, verify, and rationalize alarms in alignment with operational requirements. - Ensure HMI changes are traceable, approved, and aligned with control logic and site standards.Embedded OT Cybersecurity Responsibilities- Ensure secure configuration baselines for controllers, HMIs, engineering workstations, and OT servers. - Validate user access controls, role-based privileges, and segregation of duties. - Enforce disciplined change management for logic, configuration, and HMI modifications. - Identify cyber-related risks impacting safety, availability, and operational reliability.Required Technical Competencies- Strong hands-on experience with industrial DCS, PLC, and/or SIS platforms . - Solid understanding of redundancy concepts (TMR, hot-standby, failover). - Proven execution experience in loop checking, commissioning, and HMI modification. - Strong knowledge of industrial instrumentation (pressure, flow, temperature, level, analyzers). - Ability to interpret P&amp;IDs, loop diagrams, cause &amp; effect charts, and control narratives.Qualifications &amp; Experience- Bachelor&rsquo;s degree in Instrumentation Engineering, Control Engineering, Electrical Engineering, or equivalent. - Minimum 2 years of relevant industrial experience. - Experience in commissioning, brownfield, migration, or live plant support projects is strongly preferred.Professional Attributes- Execution-driven, methodical, and detail-oriented. - Strong troubleshooting and root-cause analysis capability. - Able to operate effectively under commissioning timelines and operational constraints. - Clear communicator with engineering, operations, and cybersecurity stakeholders.Job Type: Temporary Contract length: 4 monthsPay: BD800.000 - BD1,200.000 per month

Cybersecurity Control Engineer

VINCI Energies

<div>
 Join Comsip Al' A'ali &mdash; Bahrain&rsquo;s trusted leader in electrical and instrumentation engineering
 
 
 
 Comsip Al A'Ali
 
 , a subsidiary of VINCI Energies, delivers
 
 innovative
 
 ,
 
 reliable
 
 , and
 
 customer-focused
 
 solutions that drive industrial and commercial progress across the Kingdom &mdash; all while maintaining the highest standards of safety, quality, and sustainability.
 
 
 
 Our expertise
 
 
 
 We provide
 
 turnkey solutions
 
 across the entire project lifecycle, with deep specialization in:
 
 
 <ul>
 <li>
 Electrical Engineering Services
 </li>
 <li>
 Instrumentation Contracting
 </li>
 <li>
 Medium-Voltage Switchgear &amp; Circuit Protection
 </li>
 <li>
 Industrial &amp; Commercial Sector Projects
 </li>
 <li>
 Technical Construction Services
 </li>
 <li>
 Architectural &amp; Engineering Consultancy
 
 
 </li>
 </ul>
 Backed by the strength of the VINCI Energies network and its brands &mdash;
 
 Actemium
 
 and
 
 Omexom
 
 &mdash; Comsip Al A&rsquo;Ali delivers
 
 agile
 
 ,
 
 locally adapted
 
 , and
 
 high-performance
 
 solutions, embracing a culture of sustainable innovation.
 
 
 If you&rsquo;re passionate about mechanical systems and enjoy working in a fast-paced environment, join us as a Maintenance Mechanical Engineer and help drive operational excellence through proactive maintenance.
 
 
 
 Role &amp; Responsibilities
 
 
 
 Minimum 15 years of mechanical maintenance experience in the oil and gas (onshore/offshore) or refinery or petrochemical chemical Industry.
 
 
 <ul>
 <li>
 Minimum 15 years of mechanical maintenance experience in the oil and gas (onshore/offshore) or refinery or petrochemical chemical Industry.
 </li>
 <li>
 Experience in planning and execution of preventive, predictive, and corrective maintenance, Turnarounds, and shutdowns
 </li>
 <li>
 Hands-on experience with static equipment such as pressure vessels, heat exchangers, pipelines, and storage tanks.
 </li>
 <li>
 Extensive knowledge of rotating equipment, including pumps, compressors, turbines, and gearboxes.
 </li>
 <li>
 Experience conducting and supervising inspections using NDT techniques (e.g., UT, RT, PT).
 </li>
 <li>
 Familiarity with condition-based monitoring techniques (e.g., vibration analysis, thermography, oil analysis).
 </li>
 <li>
 Proficiency in SAP Plant Maintenance (PM) for:
 </li>
 <li>
 Proven ability to manage mechanical maintenance projects, including equipment overhauls and modifications.
 </li>
 <li>
 Experience in reviewing engineering designs and specifications for compliance with standards.
 </li>
 <li>
 Deep understanding of HSE regulations and industry standards (API, ASME, ISO).
 </li>
 <li>
 Experience conducting risk assessments and participating in safety audits and incident investigations.
 </li>
 <li>
 Planning, scheduling, and executing maintenance activities.
 </li>
 <li>
 Managing equipment history and work orders.
 </li>
 <li>
 Analyzing maintenance data to improve reliability and efficiency.
 </li>
 <li>
 Certified Maintenance and Reliability Professional (CMRP) preferred
 
 
 </li>
 </ul>
 
 Qualifications
 
 
 
 <ul>
 <li>
 Bachelors in mechanical engineering or related field.
 
 
 </li>
 </ul>
 
 Why join us?
 
 
 
 
 Our DNA
 
 : Trust, Entrepreneurial Spirit, Solidarity, Autonomy, Responsibility
 
 
 Joining us means becoming part of a large group while enjoying the agility and warmth of a human-sized company!
 
 
 A personalized onboarding journey from day one, with tailored career follow-up
 
 
 Opportunities for growth, training, and mobility within a fast-growing international group
 
 
 Close and supportive management
 
 
 Recognition of employee performance through a company savings plan
 
 
 Pride in shared achievements
 
 
 ☘️ Respect for the environment and local communities in the countries where we operate (Human Rights Guide)
 
 
 Commitment to the health and safety of our employees
 
 
 At VINCI Energies Oil &amp; Gas, CSR initiatives are deeply embedded in our activities, our ways of working, and ultimately, in our DNA
</div>

Maintenance Engineer- Mechanical

Omada Rail Systems

<div><ul><li>Permanent Contract
</li></ul><ul><li>Mid-Senior Level
</li></ul><ul><li>Manama
</li></ul><ul><li>Technical Engineering</li></ul></div>
 <div>About Us 
Egis is an international player active in architecture, consulting, construction engineering and mobility services. We create and operate intelligent infrastructures and buildings that respond to the climate emergency and contribute to more balanced, sustainable and resilient territorial development. Operating in 100 countries, Egis puts the expertise of its 19,500 employees at the service of its clients and develops cutting-edge innovations accessible to all projects. Through its wide range of activities, Egis is a key player in the collective organisation of society and the living environment of citizens all over the world.
With 3,500 employees across 8 countries in the Middle East, Egis has delivered over 700 complex development projects, stimulating economic growth and enhancing quality of life. Ranked among the top ten firms in the Middle East by Engineering News Record (ENR), Egis is committed to sustainable development. The Group&rsquo;s operations in the Middle East are built on strategic acquisitions and a deep understanding of local market conditions. Egis&rsquo; long history of providing comprehensive engineering, consulting, and project management services makes it a trusted partner for regional governments, investors, and developers. 
About the Role 
We are seeking an experienced Mechanical Design Engineer to join our utilities team. The successful candidate will be responsible for designing pump stations and pressurized distribution networks for potable water, firefighting systems, and TSE (treated sewage effluent) systems. The role requires technical leadership across detailed design, hydraulic calculations, equipment selection, specification writing, coordination with multidisciplinary teams, and support through procurement and construction. The ideal candidate has hands-on experience with hydraulic modelling software, pump selection, system commissioning, and local standards for water and fire systems. 
<ul><li>
Lead design of pump stations from concept through detailed design.</li><li>
Design pressurized networks for potable water, firefighting, and TSE systems: layout, sizing, hydraulic zoning, pressure management, and isolation schemes.</li><li>
Perform hydraulic calculations and network analysis (head-loss, flow capacity, pump duty points, system curves, transient/ surge analysis where required).</li><li>
Develop pump selection and pump curve matching; specify motors, drivers (VFDs), control strategies, and instrumentation (pressure/flow/level sensors).</li><li>
Prepare detailed equipment specifications, datasheets, bill of materials, and bid documents for pumps, valves, actuators, hydrants, strainers, and related mechanical equipment.</li><li>
Create and review mechanical drawings (P&amp;IDs, general arrangement, piping and instrumentation, isometrics) and coordinate with civil, electrical, instrumentation, and structural teams.</li><li>
Define and specify piping materials, fittings, supports, expansion joints, cathodic protection and corrosion mitigation strategies.</li><li>
Ensure design compliance with applicable codes, standards and regulations.</li><li>
Evaluate energy efficiency and propose optimization measures (efficient pump selection, VFD control, pressure management, leak reduction).</li><li>
Provide technical support during procurement (tender clarifications, vendor evaluation), factory acceptance tests (FAT), site installation, start-up, commissioning and performance testing.</li><li>
Prepare technical reports, calculation notes, and design deliverables; present design reviews and progress to stakeholders.</li><li>
Identify operational and maintenance considerations; prepare O&amp;M manuals and training materials for operations teams.</li><li>
Participate in risk assessments, value engineering, and QA/QC reviews.</li></ul> 
What do we need from you 
<ul><li>
Bachelor&rsquo;s degree in Mechanical Engineering. Relevant postgraduate qualifications are advantage.</li><li>
Minimum 10 years of practical design experience in mechanical design of water infrastructure, pump stations and pressurized networks.</li><li>
Proven experience with pump selection and hydraulic design for potable water, fire-fighting and wastewater/TSE systems.</li><li>
Hands-on experience with hydraulic/network modeling software WaterGEMS</li><li>
Required experience in surge/transient analysis for pressurized systems using industry-standard tools (e.g Bentley HAMMER, or comparable software) and interpretation of results to recommend appropriate mitigation.</li><li>
Strong knowledge of design standards and codes.</li><li>
Proficient in CAD (AutoCAD Civil 3D) and familiarity with BIM workflows is preferred.</li><li>
Solid technical writing skills and experience producing design reports and specifications.</li><li>
Good project management skills including time management, prioritization and the ability to work under tight deadlines.</li><li>
Strong communication skills and ability to coordinate with clients, authorities and multidisciplinary teams.</li></ul></div>

Mechanical Engineer

Egis

<div>
 
 Egis is an international player active in architecture, consulting, construction engineering and mobility services. We create and operate intelligent infrastructures and buildings that respond to the climate emergency and contribute to more balanced, sustainable and resilient territorial development. Operating in 100 countries, Egis puts the expertise of its 19,500 employees at the service of its clients and develops cutting-edge innovations accessible to all projects. Through its wide range of activities, Egis is a key player in the collective organisation of society and the living environment of citizens all over the world.
 
 
 
 
 With 3,500 employees across 8 countries in the Middle East, Egis has delivered over 700 complex development projects, stimulating economic growth and enhancing quality of life. Ranked among the top ten firms in the Middle East by Engineering News Record (ENR), Egis is committed to sustainable development. The Group&rsquo;s operations in the Middle East are built on strategic acquisitions and a deep understanding of local market conditions. Egis&rsquo; long history of providing comprehensive engineering, consulting, and project management services makes it a trusted partner for regional governments, investors, and developers.
 
 
 
 
 
 
 Job Description
 
 
 
 
 We are seeking an experienced Mechanical Design Engineer to join our utilities team. The successful candidate will be responsible for designing pump stations and pressurized distribution networks for potable water, firefighting systems, and TSE (treated sewage effluent) systems. The role requires technical leadership across detailed design, hydraulic calculations, equipment selection, specification writing, coordination with multidisciplinary teams, and support through procurement and construction. The ideal candidate has hands-on experience with hydraulic modelling software, pump selection, system commissioning, and local standards for water and fire systems.
 
 
 
 
 
 
 
 <ul>
 <li>
 Lead design of pump stations from concept through detailed design.
 </li>
 <li>
 Design pressurized networks for potable water, firefighting, and TSE systems: layout, sizing, hydraulic zoning, pressure management, and isolation schemes.
 </li>
 <li>
 Perform hydraulic calculations and network analysis (head-loss, flow capacity, pump duty points, system curves, transient/ surge analysis where required).
 </li>
 <li>
 Develop pump selection and pump curve matching; specify motors, drivers (VFDs), control strategies, and instrumentation (pressure/flow/level sensors).
 </li>
 <li>
 Prepare detailed equipment specifications, datasheets, bill of materials, and bid documents for pumps, valves, actuators, hydrants, strainers, and related mechanical equipment.
 </li>
 <li>
 Create and review mechanical drawings (P&amp;IDs, general arrangement, piping and instrumentation, isometrics) and coordinate with civil, electrical, instrumentation, and structural teams.
 </li>
 <li>
 Define and specify piping materials, fittings, supports, expansion joints, cathodic protection and corrosion mitigation strategies.
 </li>
 <li>
 Ensure design compliance with applicable codes, standards and regulations.
 </li>
 <li>
 Evaluate energy efficiency and propose optimization measures (efficient pump selection, VFD control, pressure management, leak reduction).
 </li>
 <li>
 Provide technical support during procurement (tender clarifications, vendor evaluation), factory acceptance tests (FAT), site installation, start-up, commissioning and performance testing.
 </li>
 <li>
 Prepare technical reports, calculation notes, and design deliverables; present design reviews and progress to stakeholders.
 </li>
 <li>
 Identify operational and maintenance considerations; prepare O&amp;M manuals and training materials for operations teams.
 </li>
 <li>
 Participate in risk assessments, value engineering, and QA/QC reviews.
 
 
 
 </li>
 </ul>
 
 Qualifications
 
 
 
 <ul>
 <li>
 Bachelor&rsquo;s degree in Mechanical Engineering. Relevant postgraduate qualifications are advantage.
 </li>
 <li>
 Minimum 10 years of practical design experience in mechanical design of water infrastructure, pump stations and pressurized networks.
 </li>
 <li>
 Proven experience with pump selection and hydraulic design for potable water, fire-fighting and wastewater/TSE systems.
 </li>
 <li>
 Hands-on experience with hydraulic/network modeling software WaterGEMS
 </li>
 <li>
 Required experience in surge/transient analysis for pressurized systems using industry-standard tools (e.g Bentley HAMMER, or comparable software) and interpretation of results to recommend appropriate mitigation.
 </li>
 <li>
 Strong knowledge of design standards and codes.
 </li>
 <li>
 Proficient in CAD (AutoCAD Civil 3D) and familiarity with BIM workflows is preferred.
 </li>
 <li>
 Solid technical writing skills and experience producing design reports and specifications.
 </li>
 <li>
 Good project management skills including time management, prioritization and the ability to work under tight deadlines.
 </li>
 <li>
 Strong communication skills and ability to coordinate with clients, authorities and multidisciplinary teams.
 </li>
 </ul>
</div>

Egis Group

<div>Company Description 
Egis is an international player active in architecture, consulting, construction engineering and mobility services. We create and operate intelligent infrastructures and buildings that respond to the climate emergency and contribute to more balanced, sustainable and resilient territorial development. Operating in 100 countries, Egis puts the expertise of its 19,500 employees at the service of its clients and develops cutting-edge innovations accessible to all projects. Through its wide range of activities, Egis is a key player in the collective organisation of society and the living environment of citizens all over the world.
With 3,500 employees across 8 countries in the Middle East, Egis has delivered over 700 complex development projects, stimulating economic growth and enhancing quality of life. Ranked among the top ten firms in the Middle East by Engineering News Record (ENR), Egis is committed to sustainable development. The Group&rsquo;s operations in the Middle East are built on strategic acquisitions and a deep understanding of local market conditions. Egis&rsquo; long history of providing comprehensive engineering, consulting, and project management services makes it a trusted partner for regional governments, investors, and developers. 
Job Description 
We are seeking an experienced Mechanical Design Engineer to join our utilities team. The successful candidate will be responsible for designing pump stations and pressurized distribution networks for potable water, firefighting systems, and TSE (treated sewage effluent) systems. The role requires technical leadership across detailed design, hydraulic calculations, equipment selection, specification writing, coordination with multidisciplinary teams, and support through procurement and construction. The ideal candidate has hands-on experience with hydraulic modelling software, pump selection, system commissioning, and local standards for water and fire systems. 
<ul><li>
Lead design of pump stations from concept through detailed design.</li><li>
Design pressurized networks for potable water, firefighting, and TSE systems: layout, sizing, hydraulic zoning, pressure management, and isolation schemes.</li><li>
Perform hydraulic calculations and network analysis (head-loss, flow capacity, pump duty points, system curves, transient/ surge analysis where required).</li><li>
Develop pump selection and pump curve matching; specify motors, drivers (VFDs), control strategies, and instrumentation (pressure/flow/level sensors).</li><li>
Prepare detailed equipment specifications, datasheets, bill of materials, and bid documents for pumps, valves, actuators, hydrants, strainers, and related mechanical equipment.</li><li>
Create and review mechanical drawings (P&amp;IDs, general arrangement, piping and instrumentation, isometrics) and coordinate with civil, electrical, instrumentation, and structural teams.</li><li>
Define and specify piping materials, fittings, supports, expansion joints, cathodic protection and corrosion mitigation strategies.</li><li>
Ensure design compliance with applicable codes, standards and regulations.</li><li>
Evaluate energy efficiency and propose optimization measures (efficient pump selection, VFD control, pressure management, leak reduction).</li><li>
Provide technical support during procurement (tender clarifications, vendor evaluation), factory acceptance tests (FAT), site installation, start-up, commissioning and performance testing.</li><li>
Prepare technical reports, calculation notes, and design deliverables; present design reviews and progress to stakeholders.</li><li>
Identify operational and maintenance considerations; prepare O&amp;M manuals and training materials for operations teams.</li><li>
Participate in risk assessments, value engineering, and QA/QC reviews.</li></ul> 

Qualifications 
<ul><li>
Bachelor&rsquo;s degree in Mechanical Engineering. Relevant postgraduate qualifications are advantage.</li><li>
Minimum 10 years of practical design experience in mechanical design of water infrastructure, pump stations and pressurized networks.</li><li>
Proven experience with pump selection and hydraulic design for potable water, fire-fighting and wastewater/TSE systems.</li><li>
Hands-on experience with hydraulic/network modeling software WaterGEMS</li><li>
Required experience in surge/transient analysis for pressurized systems using industry-standard tools (e.g Bentley HAMMER, or comparable software) and interpretation of results to recommend appropriate mitigation.</li><li>
Strong knowledge of design standards and codes.</li><li>
Proficient in CAD (AutoCAD Civil 3D) and familiarity with BIM workflows is preferred.</li><li>
Solid technical writing skills and experience producing design reports and specifications.</li><li>
Good project management skills including time management, prioritization and the ability to work under tight deadlines.</li><li>
Strong communication skills and ability to coordinate with clients, authorities and multidisciplinary teams.</li></ul></div>

Explore 110+ Electrical instrumentation engineer in Bahrain this March. Find roles across top companies and apply now to boost your career.

110 electrical instrumentation engineer jobs In Bahrain

Electrical & Instrumentation Engineer

Electrical & Instrumentation Engineer

Cybersecurity Control Engineer

Maintenance Engineer- Mechanical

Mechanical Engineer

Mechanical Engineer

Mechanical Engineer