electrical engineer

electrical technician

electrician

av technician

elv engineer

generator technician

Qatar Multitech Trading and Contracting W.L.L 

The Generator Technician performs preventive maintenance, diagnostics, repairs, and testing of diesel, gas, and standby generators. The role involves working with electrical, mechanical, and control systems to ensure generators operate safely and efficiently.Key Responsibilities<ul><li>Install, commission, and test generator systems.</li><li>Perform routine preventive maintenance according to manufacturer guidelines.</li><li>Diagnose and repair electrical, mechanical, fuel, cooling, and control system faults.</li><li>Conduct load bank testing and performance evaluations.</li><li>Inspect generators, transfer switches, batteries, and associated equipment.</li><li>Troubleshoot engine, alternator, and control panel issues.</li><li>Maintain service records and prepare technical reports.</li><li>Respond to emergency breakdowns and provide field service support.</li><li>Ensure compliance with safety regulations and company procedures.</li><li>Coordinate with customers, supervisors, and other technicians as required.</li></ul>Required Skills and Qualifications<ul><li>Diploma or technical certification in Electrical, Mechanical, or Electromechanical Engineering.</li><li>Experience with diesel and gas generators.</li><li>Knowledge of electrical systems, engines, alternators, and control circuits.</li><li>Ability to read electrical schematics and technical manuals.</li><li>Familiarity with troubleshooting tools and diagnostic equipment.</li><li>Strong problem-solving and communication skills.</li><li>Valid Qatar driving license.</li></ul>Preferred Experience<ul><li>Experience with generators from companies such as Cummins, Caterpillar (CAT), FG Wilson, or Perkins.</li><li>Knowledge of Automatic Transfer Switches (ATS) and generator synchronization systems.</li><li>Experience performing load bank testing and commissioning.</li></ul>Job Type: Full-timePay: From QAR4,000.00 per monthWork Location: In person

Generator Technician

Raytheon

<div>Date Posted:
2026-07-28
Country:
United States of America
Location:
US-TX-EL PASO-M2 ~ 7201 Montana Ave ~ BLDG M2
Position Role Type:
Onsite
U.S. Citizen, U.S. Person, or Immigration Status Requirements:
U.S. citizenship is required, as only U.S. citizens are authorized to access certain necessary systems.
Security Clearance Type:
None/Not Required
Security Clearance Status:
Not Required
At Raytheon, the foundation of everything we do is rooted in our values and a higher calling &ndash; to help our nation and allies defend freedoms and deter aggress ion. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today&rsquo;s mission and stay ahead of tomorrow&rsquo;s threat. Our team solves tough, meaningful problems that create a safer, more secure world.
The Qatar Patriot Sustainment Program provides support to a Foreign Military Sales Program in support of QEADF. 
We provide Patriot Air Defense Maintenance, logistical and training support. 
Our program upholds a strong relationship with the customer driven by strong values in support of the mission. 
What You Will Do:<ul><li>
The Power Generation Tech will use his in depth knowledge and field experience related to diesel powered generators to perform the refurbishment and sustainment of the Lechmotoren 150kW, 30kW and 15kW power generation equipment used with the Patriot System. This will include disassembly, cleaning, modification (as required), refurbishment and reassembly of power generator assemblies in accordance with applicable technical manuals (TMs) and refurbishment and upgrade procedures. Generator Tech must perform depot level diagnostic, fault isolation and repair capability for Lechmotoren generators. The Generator Tech will provide oversight on Organizational and Direct Support repairs in accordance with (IAW), US ARMY 10/20/30 PMCS Maintenance Standards. Generator Tech must perform maintenance inspections and repairs, to include parts ordering in accordance with applicable technical manuals and procedures. Must also complete records, maintain tools and equipment, and performs various clean-up and refurbishment activities. Additional responsibilities will include the initial setup and facilitization of the in-country work location required for the refurbishment effort. May work with, train, and advise local hire maintenance personnel on operational and technical aspects of aforementioned equipment. Must observe and follow all safety rules and procedures, including wearing required personal safety equipment. Perform other duties and activities as directed. This position is located in Qatar.</li></ul>
Qualifications You Must Have:<ul><li>
A graduate of the US Army Power Generation Equipment Repairer (MOS 52D) course or a graduate of a technical school or manufacturer's course of instruction on diesel power generation equipment, or equivalent On-the-Job Training (OJT) or work experience in troubleshooting, fault isolation, disassembly, repair, assembly and checkout of power generation equipment.</li><li>
Minimum of four (4) years of experience with electro-mechanical troubleshooting, fault isolation, and repair of 15, 30, or 150kW diesel powered power generation equipment.</li><li>
Demonstrated ability to test generators under changing load conditions for variations in performance to ensure all specifications are met or exceeded.</li><li>
Functionally test generators after making repairs to assure compliance with design specifications and standards.</li><li>
Individuals must possess mechanical skills including experience with the use of common hand and powered tools, fixtures, templates, and associated refurbishment and modification equipment.</li><li>
Demonstrated basic computer skills for record keeping and parts requisition.</li></ul>
Qualifications We Prefer: 
<ul><li>Middle East customer experience.</li><li>
Graduate of applicable Lechmotoren power generation equipment repair course.</li><li>
Graduate of diesel powered power generation equipment repair course.</li><li>
Demonstrated experience with Lechmotoren diesel powered 15, 30, or 150kW generators.</li><li>
Demonstrated basic knowledge of the Patriot refurbishment, modification, and system integration process.</li><li>
Demonstrated knowledge of Patriot peculiar Technical Manuals and associated drawings, schematics, and publications.</li><li>
Demonstrated ability to interact with leadership effectively &ndash; including customer, Raytheon, teammates, and suppliers.</li><li>
Previous experience in International Patriot FMS Programs.</li><li>
Experience living and working in an overseas location.</li></ul>
Required Education:
Bachelor&rsquo;s degree in a relevant field OR Equivalent experience (typically 2&ndash;4 years of related professional experience)
What We Offer:
Whether you&rsquo;re just starting out on your career journey or are an experienced professional, we offer a total rewards package that goes above and beyond with compensation; healthcare, wellness, retirement, and work/life benefits; career development and recognition programs. Some of the benefits we offer include parental (including paternal) leave, flexible work schedules, achievement awards, educational assistance, and child/adult backup care.
Additional Information:
Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products
#Patriot
As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.
The salary range for this role is 68,900 USD - 131,100 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate&rsquo;s work experience, location, education/training, and key skills.
Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement.
Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company&rsquo;s performance.
This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply.
RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window.
RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans&rsquo; Readjustment Assistance Act.
Privacy Policy and Terms:</div>

Generator Technician-Qatar

Barq Group

Job SummaryThe ACMV Technician is responsible for the installation, testing, commissioning, preventive maintenance, troubleshooting, and repair of air conditioning and mechanical ventilation systems in commercial, residential, and industrial facilities. The technician ensures all ACMV systems operate efficiently, safely, and in accordance with company procedures, client requirements, and applicable standards.Key Responsibilities<ul><li>Perform preventive and corrective maintenance of ACMV systems.</li><li>Install, inspect, test, commission, and repair HVAC and ventilation equipment.</li><li>Troubleshoot electrical, mechanical, and control system faults.</li><li>Maintain and repair:</li><li>Chillers</li><li>AHUs (Air Handling Units)</li><li>FCUs (Fan Coil Units)</li><li>VRF/VRV Systems</li><li>Split and Package Units</li><li>DX Units</li><li>Exhaust and Fresh Air Systems</li><li>Ventilation Fans</li><li>Carry out refrigerant charging, vacuuming, leak detection, pressure testing, and gas recovery.</li><li>Clean and service evaporator coils, condenser coils, air filters, drain lines, and duct systems.</li><li>Monitor system performance and recommend improvements to optimize efficiency and reduce energy consumption.</li><li>Read and interpret mechanical drawings, wiring diagrams, and technical manuals.</li><li>Respond promptly to emergency maintenance and breakdown calls.</li><li>Ensure all maintenance activities comply with HSE regulations and company safety procedures.</li><li>Maintain service reports, maintenance records, and daily work logs.</li><li>Coordinate with supervisors, engineers, and other trades during maintenance activities.</li><li>Maintain tools, equipment, and spare parts in good working condition.</li><li>Report recurring equipment failures and recommend corrective actions.</li></ul>Job Type: Full-timePay: QAR1,800.00 - QAR2,000.00 per monthLicense/Certification:<ul><li>Driving license (Preferred)</li></ul>Work Location: In person

Wanted Urgently ACMV Technician

Confidential

A leading facilities management organization is seeking an experienced AV Technician for a temporary contract (approximately 3 months) to support operations within a prestigious hospitality environment.The successful candidate will be responsible for the installation, maintenance, operation, and troubleshooting of audiovisual systems, satellite TV (SMATV) infrastructure, and event support to ensure uninterrupted services across guest rooms, meeting spaces, and conference facilities.<h3>Key Responsibilities</h3><ul><li>Install, configure, maintain, and troubleshoot audiovisual and SMATV systems.</li><li>Carry out preventive and corrective maintenance of AV equipment.</li><li>Monitor RF distribution networks and TV signal quality.</li><li>Install and terminate coaxial, Cat5e/Cat6, fibre optic, and HDMI cabling.</li><li>Set up and operate AV equipment for meetings, conferences, banquets, and special events.</li><li>Configure projectors, LED displays, LCD TVs, microphones, speakers, amplifiers, digital mixers, and presentation systems.</li><li>Conduct sound checks, equipment testing, and system verification before events.</li><li>Provide on-site technical support during live events.</li><li>Maintain AV equipment inventory and maintenance records.</li><li>Ensure all work complies with company safety procedures and manufacturer guidelines.</li></ul><h3>Requirements</h3><ul><li>Diploma or ITI in Electronics, Electrical, AV Technology, or a related field.</li><li>Minimum 2 years' experience in an AV Technician role.</li><li>Experience with SMATV systems and professional audiovisual equipment.</li><li>Knowledge of RF distribution systems and structured cabling.</li><li>Experience supporting conferences, meetings, and live events.</li><li>Strong troubleshooting and fault-finding skills.</li><li>Good communication and customer service skills.</li><li>Able to work flexible hours when required.</li></ul><h3>Preferred</h3><ul><li>Previous experience within hotels, hospitality, or facilities management.</li><li>Experience supporting conference and banquet operations.</li><li>AV-related certifications are an advantage.</li></ul><h3>Contract Details</h3><ul><li>Contract Type: Temporary (approximately 3 months)</li><li>Start Date: Immediate</li><li>Location: Qatar</li></ul>

AV Technician

Swan Global

<div>
 
 Job Title:
 
 Training Technician &ndash; Water
 
 
 
 Job Location
 
 :Doha, Qatar
 
 
 
 
 
 
 
 Job Summary:
 
 
 
 We are seeking a
 
 Training Technician &ndash; Water
 
 to support the delivery of practical technical training by preparing and maintaining laboratory equipment, tools, and training facilities. The successful candidate will ensure laboratory readiness, maintain water treatment equipment and instruments, and assist trainers during practical sessions while ensuring compliance with safety and maintenance standards.
 
 
 
 
 
 
 Mandatory Requirements &amp; Qualifications:
 
 
 
 
 Experience:
 
 
 <ul>
 <li>
 Minimum
 
 2 years of relevant experience
 
 in water treatment plants, utilities, laboratory operations, equipment maintenance, or technical training support.
 </li>
 </ul>
 
 
 Education:
 
 
 <ul>
 <li>
 Diploma or Higher Diploma in Mechanical Engineering, Electrical Engineering, Water Technology, or a related technical discipline.
 </li>
 <li>
 Higher Diploma in Mechanical or Electrical Engineering is an advantage.
 </li>
 </ul>
 
 
 Technical Skills:
 
 
 <ul>
 <li>
 Knowledge of preventive and corrective maintenance of laboratory and mechanical equipment.
 </li>
 <li>
 Hands-on experience with pumps, valves, pipelines, flowmeters, and water treatment systems.
 </li>
 <li>
 Ability to calibrate, troubleshoot, and repair laboratory instruments and monitoring equipment.
 </li>
 <li>
 Good understanding of laboratory safety practices and equipment handling procedures.
 </li>
 <li>
 Basic knowledge of maintenance documentation and equipment record keeping.
 </li>
 </ul>
 
 
 
 
 
 Mandatory Criteria:
 
 
 <ul>
 <li>
 Experience supporting laboratory operations or technical training environments.
 </li>
 <li>
 Ability to maintain laboratory equipment and respond to equipment failures efficiently.
 </li>
 <li>
 Strong problem-solving and troubleshooting skills.
 </li>
 <li>
 Good communication and teamwork abilities.
 </li>
 <li>
 Ability to work independently while maintaining high safety standards.
 </li>
 </ul>
 
 
 
 
 
 Key Responsibilities:
 
 
 <ul>
 <li>
 Maintain custody of laboratory equipment, tools, instruments, and training materials.
 </li>
 <li>
 Prepare laboratory equipment, tools, and practical training materials before each training session.
 </li>
 <li>
 Support trainers and lecturers during laboratory practical sessions, demonstrations, and trainee assessments.
 </li>
 <li>
 Perform preventive maintenance, routine servicing, and minor repairs on laboratory equipment and machinery.
 </li>
 <li>
 Respond promptly to equipment breakdowns, leaks, and emergency maintenance requirements.
 </li>
 <li>
 Operate, inspect, and maintain pumps, valves, flowmeters, pipelines, and water treatment equipment.
 </li>
 <li>
 Calibrate, troubleshoot, modify, and repair laboratory instruments, recorders, and water quality monitoring equipment.
 </li>
 <li>
 Ensure laboratory facilities comply with safety, housekeeping, and operational standards.
 </li>
 <li>
 Maintain maintenance logs, calibration records, equipment inventories, and related documentation.
 </li>
 <li>
 Assist in setting up laboratory experiments and ensuring training resources are available and operational at all times.
 </li>
 </ul>
 
 
 
</div>

Training Technician – Water

Fire Solutions

The Technician is responsible for carrying out technical installation, maintenance, troubleshooting, and repair work while also safely transporting employees, materials, tools, and equipment to project sites. The role requires adherence to company policies, client requirements, and all applicable safety regulations.Key ResponsibilitiesTechnical Duties<ul><li>Perform installation, maintenance, testing, and repair work as assigned.</li><li>Inspect equipment and identify faults or defects.</li><li>Troubleshoot technical issues and carry out corrective actions.</li><li>Complete daily work reports and service documentation.</li><li>Follow all safety procedures and use the required Personal Protective Equipment (PPE).</li></ul>Experience<ul><li>Minimum 2&ndash;3 years of experience in a similar technical role.</li><li>Rady to join immediately</li><li>Transferable visa with NOC</li><li>Fluent in English</li></ul>QualificationDiploma/HSCWork Location: In person

TECHNICIAN CUM DRIVER

Minor Hotels

<div>
 
 Job Location:
 
 
 
 Souq Waqif Boutique Hotel By Tivoli
 
 
 
 Overview
 
 
 
 Minor Hotels is an international hotel owner, operator and investor, currently with a diverse portfolio of over 530 properties designed intelligently to appeal to a variety of travellers, serving new passions as well as personal needs. Through our Anantara, Avani, Elewana, Oaks, NH Hotels, NH Collection, nhow and TIVOLI properties, Minor Hotels operates in 50+ countries across Asia Pacific, the Middle East, Africa, the Indian Ocean, Europe and South America.
 
 
 <ul>
 <li>
 As an AC Technician you are responsible to install, service and repair temperature and air quality control systems and your role will include key responsibilities such as:
 </li>
 <li>
 Repair, maintain and provide technical attention to all electrical and mechanical refrigeration systems of the hotel - freezer, fridges, ice makers, fan coil units, chiller, etc.
 </li>
 <li>
 Maintain preventively all air-conditioning and refrigeration systems within the hotel
 </li>
 <li>
 Check on performance of refrigeration systems and components
 </li>
 <li>
 Verify all door closing systems on walk in coolers / freezer (door gaskets / latches)
 </li>
 <li>
 Check and maintain all defrosting systems and automation of ice makers
 </li>
 <li>
 Work on maintenance requests from all departments
 </li>
 <li>
 Ensure routine cleaning of fan coil units and air-handling unit filters
 </li>
 <li>
 Check on performance of air-conditioning and chill water systems
 </li>
 <li>
 Cooperate with all engineering colleagues in detention of failures of air-condition and refrigeration system and function set up
 </li>
 <li>
 Strict control on venting of CFC&rsquo;s to atmosphere
 </li>
 <li>
 Overhauling of air-condition / refrigeration equipment and systems
 </li>
 <li>
 Check all refrigeration and oil levels and control of major repairs
 </li>
 <li>
 Cooperate and inform Engineering Storekeeper on purchase of parts
 </li>
 <li>
 Carry out all works as per the country technical regulations and safety standards
 
 
 </li>
 </ul>
 
 Qualifications
 
 
 
 <ul>
 <li>
 Must have the appropriate documented training from a technical/vocational institute.
 </li>
 <li>
 One year operating experience in a hotel engineering department.
 </li>
 <li>
 Must be able to read and interpret blueprints and electrical schematics.
 </li>
 <li>
 VRF/VRV system experience is a plus.
 
 
 </li>
 </ul>
 Not the right fit? Set up email alerts as new job postings become available that meet your interest!
</div>

HVAC Technician

Explore 8+ Generator technician in Doha this August. Find roles across top companies and apply now to boost your career.