analyst - plant accounting

risk manager

cost analyst

Saudi Aramco Total Refining and Petrochemical Company (SATORP)

<div>
 
 
 Scope:
 
 
 
 
 
 
 Responsibility for receiving budget and costs data from Maintenance divisions, preparing Maintenance operations budgets and cost estimates, tracking costs and expenditures and reporting on financial performance results.
 
 
 
 
 
 
 Key Duties, Responsibility &amp; Accountabilities
 
 
 
 
 
 <ol>
 <li>
 Develop and prepare Maintenance Divisions operating budgets and cost estimates in coordination with Routine Maintenance Team and Contract Admin Leader.
 </li>
 <li>
 Monitor actual expenditures versus planned budgets and forecasts and prepare deviation reports with explanations to the Contract Admin Leader.
 </li>
 <li>
 Provide other maintenance divisions with accurate information pertaining actual and planned budgets, forecasts, and expenditures.
 </li>
 <li>
 Identify areas of concern for potential cost overruns or under-spends; recommend actions or solutions where possible to maintain expenditure within budget.
 </li>
 <li>
 Participate in setting financial Key Performance Indicators for Maintenance Divisions and report on their performance or a regular basis.
 </li>
 <li>
 Monitor and review maintenance services&rsquo; Contractors expenditures in coordination with maintenance team and ensure that all contractors&rsquo; expenditures are within budget.
 </li>
 <li>
 Utilize the SAP system to support effective budget decision making and financial monitoring and management.
 </li>
 <li>
 Review Contractor&rsquo;s cost reports and work progress and provide comments and recommendations to budget holder
 </li>
 <li>
 Perform other related duties as assigned by the Contract Admin Leader.
 </li>
 <li>
 Invoice Verification
 </li>
 <li>
 Supporting Material and Services Procurement Division (MSPD) in commercial evaluations and providing feedback to MSPD for on-going contracts for cost optimization and better control.
 </li>
 <li>
 Providing accruals and other data to budget &amp; planning Analyst for Management reports.
 </li>
 <li>
 Covering Cost/Contracts Engineer during his absence.
 </li>
 <li>
 Writing instructions/procedures for invoicing in the light of contract.
 </li>
 </ol>
 
 
 
 
 
 Requirements:
 
 
 
 
 
 <ul>
 <li>
 Technical/ Vocational Diploma or, Associate Degree in the related field.
 </li>
 <li>
 8+ years of experience in similar technical/ industrial field of work.
 </li>
 <li>
 Strong knowledge of maintenance services budget and cost control.
 </li>
 <li>
 Ability to monitor all cost aspects of maintenance services.
 </li>
 <li>
 Ability to develop &amp; prepare Maintenance Operating Budget and Cost Estimates.
 </li>
 <li>
 Conversant with SAP and Microsoft Office applications.
 </li>
 <li>
 Monitor and review maintenance services&rsquo; Contractors expenditures.
 </li>
 </ul>
 
 
</div>

Cost Analyst

Air Products

<div>
 At Air Products, our purpose is to bring people together to reimagine what&rsquo;s possible, collaborate and innovate solutions to the world&rsquo;s most significant energy and environmental sustainability challenges. Grow with us as we embark on building tomorrow together by being the safest, most diverse and most profitable industrial gas company in the world.
 
 
 
 Reimagine What&rsquo;s Possible
 
 
 
 
 Job Description Summary
 
 
 
 Provide expert planning and project controls support for BHIG&rsquo;s Project Portfolio Organization, ensuring accurate scheduling, cost forecasting, and performance reporting. The role drives compliance with BHIG standards and customer requirements, enabling successful project delivery within scope, time, and budget.
 
 
 
 Key Responsibilities
 
 
 
 
 Planning &amp; Scheduling
 
 
 
 <ul>
 <li>
 Develop and maintain integrated project schedules using Primavera P6 or equivalent tools.
 </li>
 <li>
 Ensure alignment of engineering, procurement, and construction activities with overall project timelines.
 </li>
 <li>
 Perform schedule risk analysis and recommend mitigation strategies.
 
 
 </li>
 </ul>
 
 Cost Control &amp; Forecasting
 
 
 
 <ul>
 <li>
 Prepare and monitor project budgets, cost forecasts, and cash flow projections.
 </li>
 <li>
 Track commitments, expenditures, and variances against approved budgets.
 </li>
 <li>
 Support monthly cost reporting and earned value analysis.
 
 
 </li>
 </ul>
 
 Project Controls Governance
 
 
 
 <ul>
 <li>
 Implement Air Products and BHIG project controls procedures.
 </li>
 <li>
 Maintain accurate progress measurement systems and performance dashboards.
 
 
 </li>
 </ul>
 
 Customer Expectation Management
 
 
 
 <ul>
 <li>
 Provide transparent reporting to customers and stakeholders on schedule and cost performance.
 </li>
 <li>
 Address concerns promptly and ensure alignment with contractual requirements.
 
 
 </li>
 </ul>
 
 Interface &amp; Coordination
 
 
 
 <ul>
 <li>
 Collaborate with engineering, procurement, and construction teams to validate progress data.
 </li>
 <li>
 Support change management processes and assess impact on schedule and cost.
 
 
 </li>
 </ul>
 
 Risk &amp; Change Management
 
 
 
 <ul>
 <li>
 Identify schedule and cost risks; develop mitigation plans.
 </li>
 <li>
 Evaluate change requests and incorporate approved changes into baseline plans.
 
 
 </li>
 </ul>
 
 Minimum Qualifications
 
 
 
 <ul>
 <li>
 Education: Bachelor&rsquo;s degree in engineering or related discipline.
 </li>
 <li>
 Experience: 8+ years in project planning and controls within oil &amp; gas or petrochemical projects.
 </li>
 <li>
 Technical Skills: Expertise in Primavera P6, cost control systems, and EPC execution practices; familiarity with Saudi Aramco standards.
 </li>
 <li>
 Certifications: PMP or equivalent preferred.
 
 
 </li>
 </ul>
 
 Core Competencies
 
 
 
 <ul>
 <li>
 Analytical and detail-oriented mindset.
 </li>
 <li>
 Stakeholder collaboration and communication.
 </li>
 <li>
 Problem-solving and continuous improvement.
 </li>
 <li>
 Planning and prioritization.
 </li>
 <li>
 Leading with influence.
 
 
 </li>
 </ul>
 
 Technical Competencies
 
 
 
 <ul>
 <li>
 Advanced scheduling and resource planning.
 </li>
 <li>
 Cost control and earned value management.
 </li>
 <li>
 Risk analysis and mitigation.
 </li>
 <li>
 Knowledge of international and Saudi Aramco standards.
 
 
 </li>
 </ul>
 
 KPIs
 
 
 
 <ul>
 <li>
 Accuracy of schedule and cost forecasts.
 </li>
 <li>
 Timely reporting and variance analysis.
 </li>
 <li>
 Schedule adherence and milestone achievement.
 </li>
 <li>
 Cost performance within approved limits.
 </li>
 <li>
 Client satisfaction.
 
 
 </li>
 </ul>
 
 Working Conditions
 
 
 
 <ul>
 <li>
 Site-based in Jubail (BHIG and customer sites) with occasional travel.
 </li>
 <li>
 Contractor role.
 
 
 </li>
 </ul>
 We are the world&rsquo;s largest hydrogen producer with over 80 years of industrial gas experience. We are hydrogen and industrial gas experts delivering safe, end-to-end solutions, investing in real, clean energy projects at scale, and driving the industry forward to generate a cleaner future.
 
 
 At Air Products, we work in an environment where we put safety first, diversity is essential, inclusion is our culture, and each person knows they belong and matter. To learn more, visit About Air Products.
 
 
</div>

Senior Project Planning & Controls Engineer

Alfanar Engineering Services

<div>
 
 
 About the Company
 
 
 
 
 
 
 
 
 
 Since 1976, Alfanar Projects has evolved into an integrated global project developer and engineering, construction, and technology solutions provider. With a strong track record in the energy, water, and infrastructure sectors, we work alongside governments and partners to deliver strategic projects that align with national priorities and long-term visions. Our global workforce of 10,000+ professionals drives our mission to shape a more sustainable future, delivering impact-driven solutions across borders.
 
 
 
 
 
 
 
 
 
 About the Role
 
 
 
 
 
 <ul>
 <li>
 Should be Level 2/3 Vibration Analyst.
 </li>
 <li>
 Performing Vibration spectrum analysis is mandatory.
 </li>
 <li>
 Detailed knowledge in mechanical fundamentals of rotating electrical equipment (Motors &amp; Generators).
 </li>
 <li>
 Vibration and acoustics Data collection for electrical rotating equipment&rsquo;s.
 </li>
 <li>
 Trouble shoots the faults and root cause analysis skill.
 </li>
 <li>
 Preparation of report and interact with clients.
 </li>
 <li>
 Knowledge &amp; experience in motor or generator&rsquo;s shaft vibration data collection and data analysis and ability to recommend the type of repairs required.
 </li>
 <li>
 Knowledge &amp; experience in motor or generator&rsquo;s bearing condition assessment by data collection and data analysis and ability to recommend the Scope.
 </li>
 <li>
 Knowledge of the CSI 2130, CSI 2140 &amp; Bently ADRE software usage and applications.
 </li>
 <li>
 Working knowledge of routine and advanced data acquisition techniques, knowledge in spectral, time waveform, and Peak view analysis.
 </li>
 <li>
 Knowledge and experience in online balancing and laser alignment of rotating equipment.
 </li>
 <li>
 Detailed knowledge of general mechanical fundamentals, such as fits and tolerances.
 </li>
 <li>
 Knowledge of other rotating machinery fundamentals (pumps, gearboxes, blowers, compressors, etc.).
 </li>
 <li>
 Infrared, ultrasound, lubrication, mechanical repair and bearing replacement experience.
 </li>
 <li>
 Ability to plan, schedule and manage travel, appointments and activities at SITE.
 </li>
 </ul>
 
 
 
 
 
 
 
 Qualifications:
 
 
 
 
 
 <ul>
 <li>
 Minimum Qualifications: Bachelor&rsquo;s degree in mechanical engineering with experience in related fields.
 </li>
 <li>
 Minimum Experience: 5-10 years in the field of Vibration data Analysis of rotating equipment&rsquo;s.
 </li>
 </ul>
 
 
</div>

Vibration Engineer- HT Motor

<div>
 
 
 Job Location:
 
 Saudi Arabia
 
 
 
 
 
 
 JOB PURPOSE
 
 
 
 To execute vibration testing, condition monitoring, and diagnostic analysis of rotating electrical machines (motors and generators) at workshop and site locations, ensuring equipment operates within acceptable vibration limits, improving reliability, and minimizing unplanned failures through industry-standard vibration analysis practices.
 
 
 
 Function:
 
 Supervision &amp; Technical Support for Workshop &amp; On-site Services
 
 
 
 KEY ACCOUNTABILITIES
 
 
 <ul>
 <li>
 Perform vibration data acquisition, monitoring, and analysis for electrical rotating equipment (LV &amp; HV motors and generators).
 </li>
 <li>
 Conduct vibration spectrum analysis, time waveform analysis, phase analysis, and PeakVue/advanced diagnostics.
 </li>
 <li>
 Perform fault diagnosis and root cause failure analysis (RCA) for rotating machinery.
 </li>
 <li>
 Interpret vibration trends and provide corrective maintenance recommendations.
 </li>
 <li>
 Assess shaft vibration behavior and bearing condition using advanced diagnostic techniques.
 </li>
 <li>
 Prepare detailed technical reports and present findings to clients and stakeholders.
 </li>
 <li>
 Recommend repair scopes including balancing, alignment, bearing replacement, or overhaul requirements.
 </li>
 <li>
 Perform online/offline balancing and laser alignment of rotating equipment.
 </li>
 <li>
 Support condition monitoring activities using infrared thermography, ultrasound, lubrication analysis, and mechanical inspections.
 </li>
 <li>
 Ensure proper planning and execution of site activities including scheduling, travel, and resource coordination.
 </li>
 <li>
 Maintain compliance with safety procedures and site regulations during all field activities.
 </li>
 <li>
 Provide technical guidance and support to junior engineers and technicians when required.
 </li>
 </ul>
 
 
 TOOLS &amp; SYSTEMS KNOWLEDGE
 
 
 <ul>
 <li>
 CSI 2130 / CSI 2140 vibration analyzers
 </li>
 <li>
 Bently Nevada ADRE / System 1 (if applicable)
 </li>
 <li>
 Condition monitoring software and data analysis tools
 </li>
 <li>
 Laser alignment systems (e.g., SKF / Fixturlaser or equivalent)
 </li>
 <li>
 Balancing equipment and field diagnostic tools
 </li>
 </ul>
 
 
 QUALIFICATIONS, EXPERIENCE &amp; SKILLS
 
 
 
 
 Minimum Qualification:
 
 
 <ul>
 <li>
 Bachelor&rsquo;s Degree in Mechanical Engineering (or related discipline)
 </li>
 </ul>
 
 
 Minimum Experience:
 
 
 <ul>
 <li>
 5&ndash;10 years of experience in vibration analysis and condition monitoring of rotating equipment (motors, generators, pumps, compressors, gearboxes)
 </li>
 </ul>
 
 
 Technical Skills:
 
 
 <ul>
 <li>
 Level 2/3 Vibration Analyst certification (ISO 18436 or equivalent preferred)
 </li>
 <li>
 Strong knowledge of rotating machinery fundamentals
 </li>
 <li>
 Expertise in vibration diagnostics and condition-based maintenance
 </li>
 <li>
 Experience in shaft alignment, balancing, and machinery troubleshooting
 </li>
 <li>
 Knowledge of mechanical fits, tolerances, and machinery assembly practices
 </li>
 </ul>
 
 
 Soft Skills:
 
 
 <ul>
 <li>
 Strong analytical and problem-solving skills
 </li>
 <li>
 Self-motivated and proactive
 </li>
 <li>
 Team player with leadership capability
 </li>
 <li>
 Ability to work under pressure and extended working hours when required
 </li>
 <li>
 Strong reporting and client communication skills
 </li>
 </ul>
 
 
 COMPETENCIES
 
 
 <ul>
 <li>
 Strong technical expertise in vibration analysis and rotating machinery
 </li>
 <li>
 Hands-on field experience in testing and diagnostics
 </li>
 <li>
 Ability to supervise and guide technical teams
 </li>
 <li>
 Strong commitment to safety and quality standards
 </li>
 <li>
 Flexibility for site work, travel, and extended assignments
 </li>
 </ul>
</div>

Vibration Engineer – Motors

Saudi Services For Electro Mechanic Works Co. SSEM

<div>
 
 
 About SSEM
 
 
 
 Saudi Services for Electro Mechanic Works Co. (SSEM) is a 100% Saudi-owned closed joint stock company and a member of the Al-Rashid Group. Established in 1976, originally under the name Saudi Swiss Electro Mechanic Works Co. Ltd., the company became wholly owned by Al-Rashid Group in 1981 and has since grown into one of the Kingdom's leading EPC contractors.
 
 
 SSEM specializes in the turnkey execution of large-scale Engineering, Procurement, and Construction (EPC) and Operation &amp; Maintenance (O&amp;M) projects, operating as a Main Contractor, Consortium Leader, or Joint Venture Partner. The company holds
 
 Grade 1 classification
 
 for both Electrical and Mechanical Works in Saudi Arabia.
 
 
 
 
 
 
 Role Summary
 
 
 
 The Risk Manager is responsible for establishing and maintaining the project's risk management process in accordance with PMI standards and ISO 31000. The role ensures that threats and opportunities affecting cost, schedule, scope, quality, and HSE objectives are systematically identified, analyzed, and managed throughout the project lifecycle.
 
 
 
 Key Responsibilities
 
 
 <ul>
 <li>
 Develop, implement, and maintain the Project Risk Management Plan and supporting procedures.
 </li>
 <li>
 Facilitate risk identification workshops with project stakeholders and maintain the project risk register.
 </li>
 <li>
 Conduct qualitative and quantitative risk analysis, including Monte Carlo schedule and cost risk analysis.
 </li>
 <li>
 Monitor risk triggers, track mitigation actions, and report risk exposure to project management and the client.
 </li>
 <li>
 Integrate risk outputs with the project schedule, cost baseline, change management, and contingency processes.
 </li>
 <li>
 Provide risk input to monthly reporting, forecasts, and management reviews.
 </li>
 <li>
 Liaise with contractors and subcontractors to ensure alignment on risk reporting and mitigation.
 </li>
 <li>
 Promote risk awareness and a structured risk culture across the project organization.
 </li>
 </ul>
 
 
 Minimum Qualifications
 
 
 <ul>
 <li>
 Bachelor's degree in Engineering, Construction Management, or a related discipline.
 </li>
 <li>
 7 to 10 years minimum of demonstrated experience as a Risk Engineer or Risk Manager on large-scale infrastructure or EPC projects.
 </li>
 <li>
 3 Years as a lead minimum
 </li>
 <li>
 
 PMI-RMP (Risk Management Professional) certification is mandatory.
 
 </li>
 <li>
 Working knowledge of PMI PMBOK and ISO 31000 risk management standards.
 </li>
 <li>
 Proficiency with risk analysis software (Primavera Risk Analysis, Safran Risk, @RISK, or ARM) and Primavera P6.
 </li>
 </ul>
 
 
 Core Competencies
 
 
 <ul>
 <li>
 Technical expertise in quantitative risk analysis
 </li>
 <li>
 Strong analytical and decision-support capability
 </li>
 <li>
 Effective communication and stakeholder management
 </li>
 <li>
 Negotiation and influencing skills
 </li>
 <li>
 Accountability and results orientation
 </li>
 </ul>
 
 
</div>

Risk Manager

Alkhorayef Industries Company

<div>
 
 
 Supply Chain Operations:
 
 
 <ul>
 <li>
 Collecting and analyzing supply chain data
 </li>
 <li>
 Recommending improvements to boost performance and reduce costs
 </li>
 <li>
 Coordinating with other professionals to implement changes and new systems
 </li>
 <li>
 Work closely with key functional leaders in supporting areas (Supply Chain, IT, Finance, BU's, etc.) in developing and implementing process improvements, including documenting procedures and user training.
 </li>
 <li>
 Build, develop and implement key performance indicators for Supply Chain Services
 </li>
 <li>
 Create processes and methods to gather supply chain data
 </li>
 <li>
 Coordinate monthly budgetary spending plan for the Supply Chain
 </li>
 <li>
 Analyze data to identify problematic areas and suggest improvements
 </li>
 <li>
 Plan and implement supply chain optimization projects (e.g. warehouse-slotting, route planning)
 </li>
 <li>
 Discover the most cost-effective shipping methods and schedules up stream and down stream
 </li>
 <li>
 Evaluate vendor operations (e.g. freight forwarders) according to quality standards
 </li>
 <li>
 Collaborate with IT professionals to implement effective systems
 </li>
 <li>
 Track KPIs and report on supply chain&rsquo;s performance
 </li>
 <li>
 Evaluation, coordination, and implementation of operational and functional supply chain improvement initiatives
 </li>
 </ul>
 
 
 Policies, Processes and Procedures:
 
 
 <ul>
 <li>
 Follow all relevant Supply Chain policies, processes, standard operating procedures and instructions so that work is carried out in a controlled and consistent manner
 </li>
 <li>
 Contribute to the identification of opportunities for continuous improvement of systems, processes and practices taking into account leading practices, improvement of business processes, cost reduction and productivity improvement Promote the implementation and adherence to policies, processes and operating procedures to others within AIC
 </li>
 </ul>
 
 
 Safety, Health and Environment:
 
 
 <ul>
 <li>
 Comply with all relevant safety, health and environmental management policies, procedures and controls to ensure a healthy and safe work environment
 </li>
 <li>
 Participate in incident and accident investigations as required in line with agreed safety, health and environment policies, procedures and controls Report on changes within AIC that impact relevant safety, health and environmental management policies, procedures and controls
 </li>
 </ul>
</div>

Senior Supply Chain Planner

Chevron Phillips Chemical Company

<div>
 
 Description
 
 
 
 Saudi Industrial Investment Group (SIIG) with Chevron Phillips Chemical Company LLC, through a wholly owned affiliate Arabian Chevron Phillips Petrochemical Company (ACP), has two 50/50 joint venture projects in the Eastern Province Industrial City of Al-Jubail: Saudi Chevron Phillips Company (SCP) and Jubail Chevron Phillips Company (JCP). A third joint venture, Saudi Polymers Company (SPCo), is jointly owned by ACP and National Petrochemical Company (Petrochem).
 
 
 
 
 Purpose/Introduction
 
 
 
 
 The purpose of the role is to perform transactional accounting activities for a plant. Scope of work includes but not limited to analyzing trends, costs, Inventory, &amp; material consumption incurred to be used further to predict future revenues, expenses, creation of financial statements and analysis.
 
 
 
 Responsibilities
 
 
 
 <ul>
 <li>
 Review and perform accounting transactions and reporting for all of S-Chem manufacturing plants, includes addressing material price, projects &amp; work order settlement variances.
 </li>
 <li>
 Provide general accounting support for monthly, quarterly, and annual closings including inventory accuracy, cost review and classification/reclassification, product cost build-up, reconciliation of assigned balance sheet accounts (assets/inventory) and inventory net change.
 </li>
 <li>
 Analysis of monthly operating variances and records explanations through coordination with the plant operations and maintenance teams to justify the fluctuations in volume/amounts in context to budget and other internal, seasonal or market impacts.
 </li>
 <li>
 Monitor inventory data to physical accuracy and completeness through facilitation of monthly inventory counts and reconciliations at all production plants.
 </li>
 <li>
 Work with projects and maintenance teams to ensure accuracy of fixed asset listings, this may include addition, deletion and asset disposition, depreciation and capitalization requirements followed by internal policies.
 </li>
 <li>
 Reviews production and feedstock consumption data to ensure accuracy of records, its entry in the system and to perform variance analysis.
 </li>
 <li>
 Review open PO and GRIRs and follow up with concerned functions for timely closure.
 </li>
 <li>
 Contributes toward full cycle budgeting process, through collection of data from various departments, its analysis (variance justification), and embedding management directions for approvals and necessary budget cuts.
 </li>
 <li>
 Assist with annual review and audit of internal control procedures to maintain compliance and to minimize financial risk to the plant.
 </li>
 <li>
 Analyze and report the product offering, their pricing strategies, and profitability aspects in comparison to the market through engagement with third party firms and participating in the surveys.
 </li>
 <li>
 Strictly follows internal policies, accounting standards and practices or other compliance requirements in all activities performed.
 </li>
 <li>
 Undertakes accountabilities in the operational excellence process &amp; continuous process improvement for the area assigned.
 </li>
 <li>
 Performs any other relevant task as directed direct Section Head Plant Accounting.
 
 
 </li>
 </ul>
 
 Required Qualifications
 
 
 
 Academic Qualification: Bachelor&rsquo;s degree in accounting
 
 
 
 Experience
 
 
 
 Total Experience 2-8 Years
 
 
 Relevant: 0-2
 
 
 
 Preferred Qualifications
 
 
 
 Specialty in Cost Accounting
 
 
 Work experience in petrochemical sector
 
 
 
 
 Skills/Performance Indicators
 
 
 
 
 <ul>
 <li>
 Applied knowledge of accounting and auditing standards and practices.
 </li>
 <li>
 Must have exposure to ERP System &ndash; SAP or related.
 </li>
 <li>
 Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations. Ability to write reports, business correspondence, and procedure manuals. Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public.
 
 
 </li>
 </ul>
 S-Chem is considered one of the pioneer companies in developing the industrial foundation of the Kingdom of Saudi Arabia, specifically the petrochemical industry. The objective is to lead the way for the private sector to invest through the petrochemical industry.
</div>

Analyst - Plant Accounting

Explore 10+ Cost analyst in Al Jubayl this May. Find roles across top companies and apply now to boost your career.