civil engineer

assistant chief engineer

fit out engineer

general repair technician - mechanical Jobs in Jeddah

general repair technician - mechanical

junior mechanical engineer Jobs in Jeddah

junior mechanical engineer

mechanical engineer

WSP in the Middle East

<div>
 
 Job Description
 
 
 
 We are seeking an experienced
 
 Mechanical Engineer
 
 to join the supervision consultancy team for a large-scale infrastructure development project located approximately
 
 100 km north of Jeddah
 
 . The selected candidate will assist the Resident Engineer in supervising mechanical and utility works on site, ensuring compliance with project specifications, approved drawings, and quality standards.
 
 
 
 Responsibilities
 
 
 
 <ul>
 <li>
 Supervise and monitor mechanical and utility construction works on site in accordance with approved drawings and project specifications.
 </li>
 <li>
 Assist the Resident Engineer (Mechanical) in overseeing mechanical infrastructure works.
 </li>
 <li>
 Inspect and supervise installation of potable water supply networks.
 </li>
 <li>
 Monitor works related to firefighting systems and associated infrastructure.
 </li>
 <li>
 Supervise installation of gas distribution networks.
 </li>
 <li>
 Monitor construction of stormwater drainage and sanitary sewage systems.
 </li>
 <li>
 Supervise installation of irrigation systems and landscape-related mechanical works.
 </li>
 <li>
 Ensure contractor compliance with approved method statements, drawings, and quality standards.
 </li>
 <li>
 Review contractor submissions including shop drawings and material submittals.
 </li>
 <li>
 Conduct site inspections and quality checks to ensure proper construction practices.
 </li>
 <li>
 Assist in preparing inspection reports, site reports, and progress updates.
 </li>
 <li>
 Identify and report technical issues, non-conformances, and delays to the Resident Engineer.
 
 
 
 </li>
 </ul>
 
 Qualifications
 
 
 
 <ul>
 <li>
 Bachelor&rsquo;s Degree in Mechanical Engineering or equivalent.
 </li>
 <li>
 Minimum 8 years of experience in infrastructure construction or supervision projects.
 </li>
 <li>
 Experience in utility infrastructure projects including potable water, firefighting, gas distribution, stormwater drainage, sanitary sewage, and irrigation systems.
 </li>
 <li>
 Previous experience working with engineering consultancy firms in a supervision capacity is preferred.
 </li>
 <li>
 Good knowledge of construction supervision, inspection procedures, and quality control standards.
 </li>
 <li>
 Strong coordination, inspection, and reporting skills.
 
 
 
 </li>
 </ul>
 Imagine a better future for you and a better future for us all.
 
 
 Join our close-knit community of talented individuals who share your passion for making a positive impact. Our global team includes more than 69,000 employees, working together to make a difference in communities both close to home and around the world.
 
 
 With us, you can. Apply today.
</div>

Mechanical Engineer

Rawafid

<div>Rawafid is seeking a highly skilled Senior Mechanical Engineer to join our dynamic engineering team. In this role, you will lead the design, analysis, and implementation of advanced mechanical systems for various industrial and construction projects. You will oversee project execution, coordinate with multidisciplinary teams, and ensure compliance with technical standards and client requirements. Your expertise will contribute to delivering high-quality engineering solutions that meet project objectives on time and within budget.
Key Responsibilities<ul><li>
Prepare specifications and datasheets for rotating equipment including high-pressure pumps (&gt;60 bar), booster pumps, dosing pumps, and energy recovery devices
</li><li>Review static equipment design including pressure vessels in accordance with ASME VIII and heat exchangers per TEMA standards
</li><li>Select appropriate materials for seawater and brine service, including super duplex stainless steel (SS 2507), 6Mo stainless steel, titanium, GRP, and rubber-lined carbon steel
</li><li>Perform mechanical calculations such as shaft alignment, vibration analysis, and bearing life assessments
</li><li>Develop equipment layouts and arrangement drawings ensuring compliance with project and space requirements
</li><li>Conduct technical evaluation of vendor bids and provide technical recommendations
</li><li>Review vendor drawings and technical documentation for compliance with project specifications
</li><li>Participate in 3D model reviews from a mechanical engineering perspective to ensure design integrity and constructability
</li><li>Support development of piping material classes in coordination with piping engineering teams
</li><li>Prepare spare parts lists for rotating and static equipment
</li><li>Participate in HAZOP studies with focus on mechanical systems and process safety considerations</li></ul> 

Requirements 
<ul><li>
Bachelor's degree in Mechanical Engineering or related discipline.</li><li>
10 years of relevant experience in mechanical engineering roles, preferably within industrial or construction sectors</li><li>
5 years of experience in desalination (SWRO, MSF, MED) or water treatment plant projects, including equipment specification for seawater service
</li><li>Must be registered and certified with the Saudi Council of Engineers (SCE)</li><li>
Professional Engineer (PE) certification is preferred</li><li>
Strong knowledge of API standards (API 610, API 660, API 661) with familiarity with SWA technical standards</li><li>
Strong knowledge of mechanical systems design, materials, and manufacturing processes</li><li>
Excellent analytical, problem-solving, and leadership skills</li><li>
Effective communication and teamwork abilities</li><li>
Ability to manage multiple projects and meet deadlines under pressure</li></ul></div>

Senior Mechanical Engineer

LINES Design & Build

<div>
 
 
 Company Description
 
 
 
 LINES Design &amp; Build is a leader in full-service construction and fit-out solutions, specializing in delivering exceptional turnkey projects. From concept to completion, the company focuses on crafting spaces that embody excellence and transform visions into reality. Known for its expertise in design and build services, LINES Design &amp; Build is committed to superior craftsmanship and client satisfaction. Located in Jeddah, the organization continues to set benchmarks in the construction industry.
 
 
 
 
 
 We are seeking a motivated and detail-oriented
 
 Junior Mechanical Engineer
 
 to join our growing team in the construction and fit-out sector. This is an excellent opportunity for a recent graduate or early-career professional to gain hands-on experience in a dynamic project environment.
 
 
 🔧
 
 Key Responsibilities:
 
 
 <ul>
 <li>
 Assist in the design, review, and coordination of mechanical systems (HVAC, plumbing, and firefighting).
 </li>
 <li>
 Support project execution, site supervision, and progress tracking.
 </li>
 <li>
 Review shop drawings and ensure compliance with project specifications and standards.
 </li>
 <li>
 Coordinate with multidisciplinary teams (architectural, electrical, and civil).
 </li>
 <li>
 Participate in site inspections and report on project status.
 </li>
 </ul>
 
 🎯
 
 Requirements:
 
 
 <ul>
 <li>
 Bachelor&rsquo;s degree in Mechanical Engineering.
 </li>
 <li>
 0&ndash;2 years of experience (fresh graduates are encouraged to apply).
 </li>
 <li>
 Basic knowledge of HVAC and MEP systems.
 </li>
 <li>
 Familiarity with AutoCAD and MS Office.
 </li>
 <li>
 Strong communication and teamwork skills.
 </li>
 <li>
 Saudi nationality is preferred.
 </li>
 </ul>
 
 📍
 
 Location:
 
 Jeddah
 
 
 If you are eager to build your career in a fast-paced construction environment, we would love to hear from you.
 
 <ul>
 <li>
 📩
 
 Apply now
 
 or share your CV at: People@lines.com.sa
 </li>
 </ul>
</div>

Junior Mechanical Engineer

<div>Rawafid is seeking a Senior Process Engineer specializing in General and HVAC systems to join our dynamic engineering team. In this role, you will be responsible for designing, analyzing, and optimizing process systems to ensure efficient and effective HVAC operations across various projects. You will collaborate with multidisciplinary teams to develop process strategies, oversee engineering activities, and ensure compliance with industry standards and client specifications. Your expertise will contribute to enhancing system performance, sustainability, and reliability.
Key Responsibilities<ul><li>
Perform and verify process calculations, including heat and mass balance, hydraulic calculations, and pump sizing
</li><li>Support HVAC design by performing cooling load calculations for electrical rooms, MCC buildings, control rooms, and workshops, considering hot, humid, and coastal conditions (e.g., Ras Al-Khair environment)
</li><li>Design ventilation systems for chemical storage and hazardous areas
</li><li>Perform pressurization calculations for clean rooms, control rooms, and critical spaces
</li><li>Calculate utility consumption requirements, including compressed air, nitrogen, potable water, and service water systems
</li><li>Provide process engineering support for non-SWRO systems, including CIP systems, chemical storage, waste neutralization, and HVAC-related process interfaces
</li><li>Ensure HVAC and building services design compliance with SBC and ASHRAE standards
</li><li>Provide process input for datasheets and specifications of general utility equipment</li></ul> 

Requirements 
<ul><li>
Bachelor's degree in Mechanical Engineering, Chemical Engineering, or related discipline</li><li>
10 years of relevant experience in process engineering or HVAC design</li><li>
5+ years of relevant experience in desalination or water treatment projects, covering process calculations (heat balance, mass balance, hydraulics) and HVAC load calculations for industrial facilities in hot-humid coastal environments</li><li>
Must be registered and certified with the Saudi Council of Engineers (SCE)</li><li>
Professional Engineer (PE) certification is preffered</li><li>
Strong knowledge of HVAC design principles, system components, and industry standards (ASHRAE, SMACNA, etc.).</li><li>
Excellent problem-solving and analytical skills.</li><li>
Strong communication and interpersonal skills for effective collaboration across multidisciplinary teams.</li><li>
Ability to manage multiple projects and deadlines effectively.</li><li>
Professional certification or membership in relevant engineering bodies is a plus.</li></ul></div>

Process Engineer (General & HVAC)

King Abdullah University of Science and Technology

Department/Division: Research Translation HubJob Title: Research Translation Engineer - Water Desalination and DistributionReports to: Manager, Research TranslationPosition SummaryReporting to the Research Translation Manager, the Water Desalination &amp; Distribution Engineer will provide technical engineering expertise, design support, and research translation guidance across a broad range of water desalination, treatment, and distribution projects at KAUST. The engineer will contribute to the early-stage development, prototyping, and deployment of advanced technologies spanning seawater desalination (thermal, membrane, electrochemical), hydraulics and pipeline design, smart water distribution networks, wastewater treatment, and water chemistry processes. This role requires working collaboratively alongside researchers, engineers, technologists, and industrial partners to convert scientific innovations into functional engineered systems. Activities span early‑stage research translation, technology scale‑up, field deployment, pilot‑unit engineering, technical assessments, and system performance optimization.Major Responsibilities&middot; Lead and provide engineering support for desalination, water treatment, and water distribution research translation projects.&middot; Design, model, and optimize desalination systems including RO, MD, ED, and thermal processes.&middot; Work with the Research Translation team to prototype and fabricate desalination/hydraulics subsystems using KAUST workshops and external vendors.&middot; Evaluate performance of prototype systems and pilot units; identify improvement pathways and scaling potential.&middot; Develop and execute structured test plans for prototype and pilot systems, including KPI definition, data acquisition, and performance benchmarking against design targets&middot; Conduct design reviews ensuring alignment with engineering principles, safety standards, and project requirements.&middot; Create engineering documentation including system specifications, test plans, P&amp;IDs, process flow diagrams (PFDs), and mechanical drawings.&middot; Engage in resource recovery research, supporting development of water reuse, nutrient recycling, and energy recovery technologies.&middot; Lead and assist in developing technology maturity roadmaps (TRL-based) and conduct gap analyses for desalination/distribution innovations.&middot; Support risk assessments, troubleshooting, root‑cause analysis, and performance diagnostics for deployed systems.&middot; Contribute to project planning, cost estimation, and technical feasibility studies; track engineering milestones and communicate progress to project leads and stakeholders.Personal Requirements:Competencies&middot; Experience with RO, thermal desalination (VC, MSF, MED), electrodialysis, and membrane distillation.&middot; Understanding membrane performance, fouling behavior, and energy‑water optimization.&middot; Knowledge of high‑pressure pumping systems and membrane process hydraulics.&middot; Familiarity with brine management, disposal strategies, and environmental compliance.&middot; Knowledge of water‑network hydraulics, pipeline sizing, and pressure management.&middot; Experience using PIPENET or similar tools for hydraulic modeling.&middot; Familiarity with SCADA, IoT sensors, and real‑time monitoring for smart water networks.&middot; Knowledge of leak detection technologies and non-revenue water (NRW) reduction strategies.&middot; Understanding water reuse, nutrient recovery, and energy capture.&middot; Mechanical design of high‑pressure pipelines, pump housings, and treatment‑unit components.&middot; Ability to interpret drawings, P&amp;IDs, and mechanical schematics.&middot; Experience with pilot‑unit fabrication, commissioning, and troubleshooting.&middot; Familiarity with relevant standards and codes (e.g., AWWA, ASME, ISO 24512) for water infrastructure design&middot; Understanding activated sludge, nutrient removal, and sludge processes.&middot; Experience with MBRs, membrane fouling, and cleaning strategies.&middot; Knowledge of adsorption, photocatalysis, and advanced oxidation processes.&middot; Familiarity with water‑quality parameters and contaminant‑removal mechanisms.&middot; Ability to translate research into engineered systems and prototypes.&middot; Strong analytical, communication, and documentation skills.&middot; Ability to work across multiple projects and interdisciplinary teams&middot; Experience preparing technical reports, reviewing grant proposals, or regulatory submissionsQualifications&middot; Degree in Environmental, Chemical, Water Resources, or Mechanical Engineering with relevant industry experienceExperience&middot; 6 to 10 years of relevant research/engineering experience in an industry setting&middot; Demonstrated working knowledge in concept prototyping, skid mounted pilot plants and product development.&middot; Execute technology transfer projects, resolve processing issues, and conduct technical assessments on process/product impact due to changes in equipment, scale, and raw materials.&middot; Experience analyzing engineering diagrams, specifications, related data, and drawings to determine design factors such as scale, shape, and arrangement of unit operations.&middot; Experience with desalination process design, membrane technologies, or thermal systems.&middot; Experience in water distribution system engineering, hydraulics, or pipeline design.&middot; Demonstrated experience executing technology transfer or research translation projects, including resolving processing issues and assessing impact of changes in equipment, scale, or raw materials.&middot; Proven ability to interpret and produce engineering diagrams, mechanical layouts, and water‑process unit operations.&middot; Industry experience ensuring systems are reliable, manufacturable, and cost‑efficient.&middot; Knowledge of technology readiness levels, prototyping methodologies, and translational research pathways.Work Location: In person

Research Translation Engineer - Water Desalination and Distribution

Al Shrouq Engineering

Ready to grow your engineering career with real project experience, supportive mentorship, and competitive rewards? At Al Shrouq Engineering, you&rsquo;ll work on major construction projects, build your skills on site, and be part of a collaborative team that values your contribution.What You&rsquo;ll DoYou&rsquo;ll be on the front lines of project delivery &mdash; coordinating, inspecting, communicating, and solving problems to help projects succeed.Key Responsibilities<ul><li>Assist with site supervision and day‑to‑day construction activities</li><li>Coordinate with contractors, suppliers, and internal teams</li><li>Inspect work for quality, safety, and compliance with plans/specs</li><li>Track progress and prepare site reports</li><li>Support scheduling, material tracking, and documentation</li><li>Help resolve technical/site challenges promptly</li><li>Maintain site safety standards at all times</li><li>Communicate updates to project leads and stakeholders</li></ul>Skills for This RoleTechnical Capabilities<ul><li>Reading and interpreting construction drawings</li><li>Knowledge of civil/mechanical/electrical site processes</li><li>Quality control and inspection</li><li>Basic quantity measurement and reporting</li><li>Site safety best practices</li></ul>Tools &amp; Communication<ul><li>Construction software (e.g., AutoCAD, MS Project, Excel)</li><li>Clear verbal and written reporting</li><li>Coordination with multidisciplinary teams</li><li>Problem‑solving attitude</li><li>Time management on site</li></ul>Salary, Benefits &amp; ScheduleWe believe in transparency and balance:Competitive Salary: (negotiable based on experience)Benefits You&rsquo;ll Love<ul><li>Health insurance coverage</li><li>End‑of‑service benefits per Saudi labor law</li><li>Paid annual leave</li><li>Accommodation support or housing allowance</li><li>Transportation support</li></ul>Work Schedule<ul><li>Sunday to Thursday (standard KSA work week)</li><li>Flexible start times where possible</li><li>Overtime offered with compensation</li></ul>About Al Shrouq EngineeringWe&rsquo;re a fast‑growing engineering and construction company delivering high‑impact infrastructure and building projects across Saudi Arabia. Teamwork, integrity, and excellence are core to how we deliver strong results for clients and long‑term career growth for our people.Why Work With UsAt Al Shrouq, you&rsquo;ll enjoy:<ul><li>Real project experience that accelerates your engineering journey</li><li>Mentorship from senior engineers who invest in your success</li><li>A supportive team culture built on respect and learning</li><li>Clear career paths &mdash; grow into Site Lead or Project Engineer roles</li><li>Recognition and rewards for performance</li></ul>Who We&rsquo;re Looking ForWe welcome candidates who are:<ul><li>Passionate about building and learning</li><li>Team players with clear communication skills</li><li>Organized and proactive on site</li><li>Ready to take ownership of tasks</li><li>Enthusiastic about continuous professional growth</li></ul>Qualifications (Realistic &amp; Inclusive)<ul><li>Diploma or Bachelor&rsquo;s in Civil, Mechanical, or related Engineering</li><li>Internship or some site exposure preferred (not required)</li><li>Willingness to learn and adapt on site</li><li>Professional attitude and safety focus</li></ul>Ready to Build Your Future?If you&rsquo;re excited to take your engineering skills to the next level, we want to hear from you! Apply now with your resume &mdash; let&rsquo;s build great things together!نوع الوظيفة: دوام كامل, دائمالراتب المدفوع: ﷼٦٬٠٠٠٫٠٠&nbsp;لكل شهرموقع العمل: بشكل شخصي

Site Engineer / Junior Engineer

KONE

<div>Certified as a Top Employer; KONE is dedicated to a better world of work and exhibits this through excellent people practices. We are committed to fostering a great work culture and inspiring the highest standards of quality and efficiency from the team putting our people first and creating a workplace that nurtures collaboration, diversity, growth, and wellbeing.
It's time to make a move. Join our flow.
We are looking for Senior Installation Engineer to manage and control projects from sales/installation hand-over to completion at handover to client and Maintenance. Supervisor is in charge of leading and managing the installation team to ensure safe, high quality, complete-on-time delivery of KONE solutions within budget. He/she acts as the KONE interface to customer and other stakeholders throughout the Fulfil process. In addition to this supervisor is expected to support the sales team in pre-tender and tender activities as requested.
What will you do?
Site supervision process:
<ul><li>Accountable for the delivery of the installation project
</li><li>Accountable for Site Safety.
 </li><li>Responsible for securing efficient management of environmental aspects of the installation.
</li><li>Accountable for the financial result of the project
</li><li>Participates to the sales/installation hand-over and validates the term of the order received from the customer together with the salesperson.
 </li><li>Responsible for planning and organizing the delivery and storage of materials and tools to the site and placing the orders to subcontractors and Non KONE factory material suppliers.
</li><li>Responsible for site preparations and follow-up of site readiness
</li><li>Accountable for use of correct KONE installation methods throughout the installation
</li><li>Collaborates with Accounts payable / Controlling to ensure site activities are planned and executed in accordance with contractual payment terms and actual payments received.
</li><li>Accountable for final testing of the equipment and handover to maintenance.
</li></ul>Customer and Sub-contractor Relationship Management:
<ul><li>Accountable for customer satisfaction and quality of installation.
</li><li>Accountable for Sub-contractor quality and Safety performance
</li><li>Single point of contact towards the customer during installation regarding site management, responsible for internal and external communication during the project 
 
</li></ul>People management / Leadership:
<ul><li>Accountable for people (site operatives) development and wellbeing and managing the performance of the team and individuals.
</li><li>Determines objectives, plans as well as organizes, communicates, controls, and motivates the installation team
</li><li>Identifies field operative training needs and manages training plans
</li></ul>Are you the one?
<ul><li>Bachelor&rsquo;s degree in electrical or mechanical engineering
</li><li>3-5 years of experience in elevator &amp; escalator industry.
</li><li>Strong project management skills.
</li><li>Excellent problem-solving abilities.
</li><li>Effective communication and negotiations with contractors, clients, and stakeholders.
</li><li>Leadership skills for managing on-site teams.
</li><li>Excellent verbal and written English and Arabic language skills.
</li><li>Keen attention to detail for design, safety, and regulations.
</li></ul>What do we offer?
<ul><li>Great dynamic team promoting a collaborative environment.
</li><li>Total reward elements that engage and motivate our employees and help us make KONE a great place to work.
</li><li>Comprehensive learning and development programs covering a wide range of professional skills.
</li><li>Engaging job with position description and clear targets.
</li><li>Regular feedback through performance discussions.
</li><li>Opportunities for individual development.
</li><li>Mentoring and coaching programs.
</li><li>Flexibility, trust and respect.
</li><li>Value-based culture, behaviors and ethics.
</li><li>Sustainability and innovation.
</li><li>Working for a successful organization.
</li></ul>At KONE, we are focused on creating an innovative and collaborative working culture where we value the contribution of each individual. Employee engagement is a key focus area for us and we encourage participation and the sharing of information and ideas. Sustainability is an integral part of our culture and the daily practice. We follow ethical business practices and we seek to develop a culture of working together where co-workers trust and respect each other and good performance is recognized. In being a great place to work, we are proud to offer a range of experiences and opportunities that will help you to achieve your career and personal goals and enable you to live a healthy and balanced life.
Read more on https://careers.kone.com/en/</div>

Senior Installation Engineer

Explore 49+ Mechanical engineer in Jeddah this April. Find roles across top companies and apply now to boost your career.