electrician

mechanical engineer

sales engineer

electrical engineer

environmental engineer

telecommunication engineer

Airswift

<div>
 One of our clients, Major Oil&amp;Gas Company in Qatar, is hiring for Instrument Engineer to work for Operations and Readiness Department. Carry out roles as Instrument Engineer based in Onshore Facilities. Candidates should have extensive pre-commissioning, commissioning and start-up experience of Oil&amp;Gas facilities.
 
 
 
 Primary Purpose Of The Job
 
 
 
 Provide technical support and assure operations team in the Instrumentation &amp;, Control Systems, Telecommunication engineering for the assigned projects, in order to achieve the required technical
 
 
 quality and integrity of work while considering Projects, Operations, Maintenance, Asset Integrity, HSE, ICT, Cyber Security requirements and objectives in terms of safety, time and cost.
 
 
 
 Principal Accountabilities
 
 
 
 Responsible for provision of the required quality technical support in the area of Instrumentation, Control systems, Telecommunication engineering expertise through all stages of the project.
 
 
 Verify and review technical designs documents in accordance with approved standards and to meet Operations, Maintenance, Asset Integrity, HSE, ICT and Cyber Security requirements.
 
 
 Ensure Scope Preparation Completeness Review and hands on experience in DCS, ESD, Fire &amp; Gas, SCADA systems, SIL ratings, SIF, Field instrumentation, Cabling, Junction Boxes, Local control panels, Field HMIs, transmitters, Detectors, Vibration probes, thermowells, Fibre optic cables, Communication converters, Metering systems, Field panels, Control valves, Loop checks, Marshalling panels, system Cabinets, PLC cabinets, CPU IOs, Modbus, Operator consoles, PAGA system, RTU, RF, Microwave radios, switches, Servers, NTP Servers, GSM Modems etc.
 
 
 Plan and coordinate between Operations, Maintenance Asset Integrity, HSE, ICT and Cyber Security teams to ensure project requirements are met and aligned.
 
 
 Identifies potential hazards during Engineering activities (as applicable) such as Document Review, Design Safety Review workshop, HAZID, ENVID, HAZOP, QRA, FERA, etc., participates in technical meetings, commissioning activities, SAT, Plant pre-start up safety audits, performance tests raises punch lists and provide support to operations and maintenance teams in various stages of project activities.
 
 
 Coordinate with Engineering, Project execution departments and Operations &amp; Maintenance teamsduring projects&rsquo; FEED and EPIC stages to align Operations and Maintenance, Asset Integrity and HSE requirements.
 
 
 Coordinate with all relevant stakeholders and resolve relevant technical issues, punch lists during
 
 
 pre-commissioning and commissioning stages until the projects are successfully commissioned and handed over.
 
 
 Support Lead engineer or supervisor to ensure that all applicable environmental, process and safety technical policies are fully integrated and implemented.
 
 
 Ensure SIMOPS, Various Project Interfaces so that Shutdown Activities are properly planned for effective execution.
 
 
 Support development of Qatari team.
 
 
 
 Qualifications/Knowledge/Skills/Experience
 
 
 
 Bachelor&rsquo;s degree in Instrument &amp; Control Engineering. Chartered Engineer status or equivalent is preferable.
 
 
 Minimum 15 years relevant post graduate experience, of which 10 years in Oil &amp; Gas industry with an international reputable Operating company.
 
 
 Experience in operations and maintenance is mandatory.
 
 
 Skill / knowledge of International, Shell DEPs and/or QP standards related to his area of expertise and Design Software related to Instrument &amp; Control Engineering.
 
 
 Exposure with international consulting company, EPIC contractor with projects&rsquo; pre-commissioning, commissioning, start up and Hand-over activities is an added advantage.
 
 
 Possess sound fundamentals in his discipline area. Shall possess very good technical skills in his discipline.
 
 
 Possess good communication, presentation skills and fluent in English language.
</div>

Instrument Engineer - Start-Up & Commissioning

C2HR LLP

Qualifications:<ul><li>Bachelor&rsquo;s Degree in Telecommunication Engineering or equivalent</li><li>Minimum 5 years of extensive experience in Fiber Optic Networks</li><li>Strong experience in:</li><li>Installation</li><li>Splicing</li><li>Testing</li><li>Commissioning</li><li>Hands-on experience with:</li><li>OTDR</li><li>Fusion Splicing Machine</li><li>Optical Power Meter</li><li>Laser Source</li><li>Must have attended certified Fiber Optic technical trainings</li><li>Preferred experience with:</li><li>Ooredoo</li><li>QNBN</li><li>Vodafone Qatar</li><li>Valid Qatar Driving License</li><li>Fluent English (Arabic is an advantage)</li><li>Computer literate (MS Office &amp; AutoCAD)</li></ul>Detailed Responsibilities:<ul><li>Operation &amp; Maintenance of Kahramaa Fiber Optic backbone network</li><li>Perform cable laying, jointing, termination &amp; splicing activities</li><li>Conduct OTDR testing and analyze attenuation reports</li><li>Execute Site Acceptance Tests (SAT)</li><li>Perform commissioning of new fiber links</li><li>Network route planning &amp; route survey coordination</li><li>Attend fiber cuts and emergency faults (24/7 standby)</li><li>Prepare technical reports &amp; testing documentation</li><li>Conduct preventive inspections and network audits</li><li>Coordinate with control centers and contractors</li></ul>Job Type: PermanentPay: QAR16,000.00 - QAR22,000.00 per monthApplication Question(s):<ul><li>Current Salary?</li></ul>Experience:<ul><li>Fiber Optic Networks: 5 years (Preferred)</li></ul>

Telecom Engineer – Fiber Optic

QatarEnergy

<div>
 
 Primary Purpose Of The Job
 
 
 
 The Telecom services systems engineer primary role to designs, develops, and implements state-of-the-art telecommunications technology architectures and solutions for optimal availability, resiliency, and scalability of telecommunication infrastructure to integrate and deliver telecommunication applications and services across the corporation. The incumbent logistically and technically coordinates and works with ICT divisions/units, corporate project managers, and external entities to deliver services and meet projected milestones in addition to an integral role in operation, management and support of related systems.
 
 
 
 Required Experience And Skills
 
 
 
 <ul>
 <li>
 Expert level of technical hands-on experience in implementation and operation of systems related to following technologies: SDH/PDH, DWDM, Microwave, Fibre Optics cables monitoring, CCTV, PAGA, ACS, Radios and NMS (Network Management System).
 </li>
 <li>
 7 to 10+ years of progressive combined technical experience in Telecommunication Systems, related standards, and protocols with a minimum of 4 to 7+ years professional hands-on experience in design, operation and support of complex telecommunication systems preferably related to the Oil and Gas industry and standards.
 </li>
 <li>
 Technical knowledge in IP Telephony services, TCP/IP suite, SCADA and industrial telecommunications systems.
 </li>
 <li>
 Strong Project management skills and ability to plan, execute, track and report progress for multiple projects.
 </li>
 <li>
 Analytical and methodical thought process skills for analyzing complex technical issues, making sound engineering decisions and executing effective actions.
 </li>
 <li>
 Experience with telecommunication infrastructure hardware installation, configuration, knowledge of IP convergence systems and services, service provider telecommunication systems, Microwave implementation and services, emerging infrastructure services, and general industrial-grade telecommunication technologies and systems.
 </li>
 <li>
 Excellent communication and writing skills with the ability to write technical blueprints, high and low level design documents, standards, processes, procedures, manuals, feasibility studies, and tendering proposals.
 </li>
 <li>
 Excellent computer office applications (Word, Excel, Project, Visio) skills.
 </li>
 <li>
 Ability to supervise and work closely and effectively with other engineers and focal points from various departments across organization.
 </li>
 <li>
 Maintain development and preservation of telecommunication services for integration onto a homogenous distributed common corporate telecommunication infrastructure serving both business and industrial-grade environments.
 </li>
 <li>
 Support optimization and efficient use of resources across the Department to improve delivery of telecommunication services.
 </li>
 <li>
 Ability to stay focused and promoting section goals and vision in handling and across multiple diverse and conflicting projects with telecommunication services requirements.
 </li>
 <li>
 Ability to collect, analyze and report relevant detailed telecommunication equipment technical logs, and data in reference to reported incidents.
 </li>
 <li>
 Provide technical conclusions, and suitable recommendations towards resolution of reported incidents based on analyzed technical data in a timely manner.
 </li>
 <li>
 Apply assigned technical recommendations and procedures as preventive or corrective measures related to sustained fault-free operation and update of telecommunication systems.
 </li>
 <li>
 Regular contact with various QP Departments and technical staff to ensure compliance and alignment of assigned tasks and projects with defined deliverables under overall division objectives.
 </li>
 <li>
 Daily interface and contact with team members for execution of assigned tasks and responsibilities, discussing projects updates, highlighting emerging issues and identifying action items.
 </li>
 <li>
 Intermittent contact with QP subsidiaries, affiliates technical focal point and project managers to execute QP services or resolve any issues related to provisioned solutions.
 </li>
 <li>
 Intermittent contact with internal and external auditors at request of supervisor to ensure transparency and enforce compliance with corporate policies and international standards.
 </li>
 <li>
 Provides required support and coordination to QP subsidiaries and Joint Venture companies, Government Organizations, Telecom Service operators, third parties, etc. on all matters related to telecommunications services.
 </li>
 <li>
 Regular contact with Materials Department staff to follow up procurement orders
 </li>
 <li>
 Practices and updates department procedures to enhance and implement the ISO procedures
 
 
 </li>
 </ul>
 
 Educational Qualifications
 
 
 
 A minimum of a Bachelor degree in Network Engineering, Computer Engineering, Electrical/Electronic Engineering, or an equivalent Engineering field.
</div>

SYSTEMS ENGINEER

Starlink Qatar

<div>
 
 The Transmission &amp; Subsea Telecom Engineer is responsible for supporting the operations, configuration, and maintenance of transmission and submarine cable systems. The role includes the installation, configuration, commissioning, and operational support of active transmission networks such as SDH, DWDM, and OTN, as well as subsea cable equipment including Power Feed Equipment (PFE) and Submarine Line Terminal Equipment (SLTE).
 
 
 The engineer will help ensure high network availability, operational reliability, and service continuity across terrestrial and submarine transmission infrastructure.
 
 
 
 Key Responsibilities
 
 
 
 
 Transmission &amp; Subsea Network Operations
 
 
 <ul>
 <li>
 Operate, monitor, and support backhaul transmission systems (SDH, DWDM, OTN) and submarine cable systems (PFE, SLTE) in accordance with vendor standards and NOC procedures.
 </li>
 <li>
 Perform installation, configuration, and commissioning of optical transmission equipment from multiple vendors.
 </li>
 <li>
 Integrate new equipment into the existing transmission infrastructure to ensure seamless operation.
 </li>
 </ul>
 
 
 Testing, Monitoring &amp; Troubleshooting
 
 
 <ul>
 <li>
 Conduct end-to-end system testing and site acceptance to verify deployments meet design and performance standards.
 </li>
 <li>
 Monitor the health and performance of DWDM and SDH networks using Network Management Systems (NMS).
 </li>
 <li>
 Perform testing, troubleshooting, and L1/L2/L3 fault resolution.
 </li>
 <li>
 Support fault restoration, emergency repairs, and maintenance activities to maintain service continuity.
 </li>
 </ul>
 
 
 Network Performance &amp; Optimization
 
 
 <ul>
 <li>
 Monitor key performance indicators (KPIs) to ensure optimal network performance.
 </li>
 <li>
 Identify recurring issues and support network optimization activities, including traffic rerouting and protection path switching to improve resilience.
 </li>
 </ul>
 
 
 Operational Support
 
 
 <ul>
 <li>
 Provide on-site and remote support to the Cable System Network Operations Center (NOC).
 </li>
 <li>
 Conduct daily system health checks and preventive maintenance activities.
 </li>
 <li>
 Maintain configuration, commissioning, and operational documentation.
 </li>
 </ul>
 
 
 Inventory &amp; Vendor Coordination
 
 
 <ul>
 <li>
 Maintain an accurate inventory of Cable Landing Station (CLS) equipment and critical spares, including tracking usage, availability, and lifecycle status.
 </li>
 <li>
 Coordinate with equipment vendors for technical support, hardware replacements (RMA processes), and SLA-related matters.
 </li>
 </ul>
 
 
 Required Skills &amp; Qualifications
 
 
 
 
 Education
 
 
 <ul>
 <li>
 Bachelor&rsquo;s Degree in Telecommunications, Computer Science, or a related field
 </li>
 </ul>
 
 
 Experience &amp; Technical Skills
 
 
 <ul>
 <li>
 Experience in operations and maintenance of transmission systems and submarine cable networks.
 </li>
 <li>
 Strong knowledge of OTN, DWDM, SDH, IP networking, and submarine cable systems.
 </li>
 <li>
 Experience with network monitoring and management platforms (NMS).
 </li>
 <li>
 Proficiency in optical testing equipment such as:
 </li>
 <li>
 OTDR / COTDR
 </li>
 <li>
 Optical Spectrum Analyzers (OSA)
 </li>
 <li>
 BERT (Bit Error Rate Tester)
 </li>
 </ul>
 
 
 Competencies
 
 
 <ul>
 <li>
 Strong troubleshooting and problem-solving skills.
 </li>
 <li>
 Ability to work under pressure during network outages and operational incidents.
 </li>
 <li>
 Good communication and coordination skills for working with vendors and NOC teams.
 </li>
 </ul>
</div>

Telecom Engineer - Transmission & Subsea cabling

VOLTAGE ENGINEERING LIMITED

We are hiring for the following position! Interested candidates may send their CVs, mentioning the position applied for in the subject line.to: hr@velqatar.comJob Title: Design Engineer (SCS &amp; Telecom)Requirement &ndash; 1 No.Qualifications &amp; Requirements:Education: Bachelor&rsquo;s Degree in Electronics, Telecommunications, or Electrical Engineering.Experience: 5 to 7+ years of experience in an EPC environment, specifically handling SCS and Telecom design for utility substations up to the 400kV level.Technical Knowledge: Strong understanding of gateway data mapping, IEC 61850 protocols, and standard telecommunication practices for the power sector. Familiarity with local utility network standards is highly preferred.Key Responsibilities:Substation Control Systems (SCS):<ul><li>Design, configure, and modify SCS architectures for high-voltage substations up to 400kV.</li><li>Integrate Bay Control Units (BCUs) and ensure all critical substation alarms, controls, and status signals are accurately mapped to the National Control Center (NCC) and Emergency NCC (ENCC).</li><li>Support End-to-End testing between the substation and the control centers to verify reliable data transmission.</li></ul>Telecommunication &amp; Fiber Optics:<ul><li>Plan the routing, termination, and splicing of Fiber Optic networks, including 48-fiber approach cables and Optical Ground Wires (OPGW).</li><li>Coordinate and oversee Fiber Optic End-to-End testing between different substations to ensure robust communication links.</li><li>Design structured cabling systems to support IP telephony and secure communications across the substation buildings.</li></ul>System Integration &amp; Upgrades:<ul><li>Knowledge of multi-vendor control systems (including Siemens, ABB, Areva, and GE) to upgrade existing substations without disrupting live grid operations.</li><li>Integrate advanced monitoring networks, such as Digital Fault Recording Systems (DFRS) and online Dissolved Gas Analyzers (DGA) for transformers.</li><li>Configure secure network routers and firewalls to connect local substation data safely to central monitoring servers.</li></ul>Vendor Coordination &amp; Documentation:<ul><li>Review and assess vendor drawings, technical submittals, and equipment manuals to ensure they strictly align with the project's design intent and utility specifications.</li><li>Coordinate technical clarifications directly with relay and equipment manufacturers to resolve design discrepancies before manufacturing and delivery.</li></ul>Job Type: Full-time

Design Engineer (SCS & Telecom)

Qatar Multitech Trading and Contracting W.L.L 

Job Summary:The NOC Engineer is responsible for network monitoring, troubleshooting, and support for telecom services. The role ensures the stability, security, and performance of network infrastructure by identifying and resolving network issues, coordinating with field engineers, and maintaining communication with stakeholders.Key Responsibilities:1. Network Monitoring &amp; Management:Monitor network performance using specialized tools and software.Ensure the telecom network, including voice, data, and fiber systems, operates optimally.Proactively detect, diagnose, and escalate network issues and alarms.2. Issue Resolution:Identify and troubleshoot telecom network outages, latency, and connectivity issues.Collaborate with network engineers and field technicians to resolve hardware and software issues.Perform root cause analysis and implement solutions to prevent future issues.3. Maintenance &amp; Support:Execute routine network maintenance tasks like software updates, hardware upgrades, and configuration changes.Support service provisioning, testing, and deployment activities.Liaise with service providers to ensure service-level agreements (SLAs) are met.4. Documentation &amp; Reporting:Maintain and update network documentation, including configurations and issue resolution procedures.Generate daily, weekly, and monthly reports on network performance and incident trends.5. Incident Management:Actively participate in incident response and resolution to minimize service impact.Escalate critical issues to senior engineers or management as necessary.Manage ticketing systems for incident tracking and resolution.6. Collaboration &amp; Communication:Work closely with telecom vendors, service providers, and internal teams for efficient service delivery.Provide updates and information to customers or stakeholders about network performance or service outages.7. Security &amp; Compliance:Ensure the security of telecom infrastructure by following industry-standard security practices.Perform regular security checks to prevent unauthorized access and maintain compliance with telecom regulations.Job Type: Full-timePay: From QAR3,000.00 per monthWork Location: In person

NOC Engineer-Telecom services

We are hiring for the following position! Interested candidates may send their CVs, mentioning the position applied for in the subject line.to: hr@velqatar.comJob Title: Overhead Line Design Engineer (OHL up to 400kV)Requirement &ndash; 1 No.EHV Transmission (Overhead Lines)Qualifications &amp; Skills:<ul><li>Education: Bachelor&rsquo;s Degree in Electrical Engineering.</li><li>Experience: 5 to 7+ years of dedicated OHL design experience in an EPC environment, with a strong background in transmission projects up to 400kV.</li><li>Technical Knowledge: Good understanding of local utility standards and crossing regulations for highways and energy sectors.</li><li>Software: High proficiency in PLS-CADD and PLS-TOWER.</li><li>Teamwork: Excellent communication skills with a proven ability to coordinate seamlessly with civil, electrical, and construction teams.</li></ul>Deep Expertise: Overhead Line Design Key Responsibilities:Line Routing &amp; Modeling:<ul><li>Perform mechanical design and layout work to determine the accurate center line, elevations, and tower spotting for transmission lines.</li><li>Utilize industry-standard software, such as PLS-CADD and PLS-TOWER, to create line profiles and tower designs.</li><li>Calculate and maintain strict, safe ground clearances where overhead lines cross highways, existing power lines, railway networks, and major energy pipelines.</li><li>Design necessary safety measures for these crossings, including guard wires, concrete crash posts for towers near roads, and protection slabs over pipelines.</li><li>Select and design systems using steel lattice towers, composite insulators, and high-capacity phase conductors (such as Quadruple or Twin bundles) for circuits up to 400kV.</li><li>Incorporate optical ground wires (OPGW) into the design to support telecommunication and protection networks.</li><li>Design the final transition points into substations, coordinating outdoor terminal compounds, structural gantries, and the down-droppers that connect the overhead lines to underground cables.</li><li>Ensure all designs meet aviation safety regulations by including tower and conductor marking lights and warning spheres.</li></ul>Vendor Coordination &amp; Documentation:<ul><li>Review and assess vendor drawings, technical submittals, and equipment manuals to ensure they strictly align with the project's design intent and utility specifications.</li></ul>Coordinate technical clarifications directly with relay and equipment manufacturers to resolve design discrepancies before manufacturing and delivery.Job Type: Full-time

Overhead Line Design Engineer (OHL up to 400kV)

Explore 330+ Telecommunication engineer in Doha this March. Find roles across top companies and apply now to boost your career.