component design engineer

Engineering Consultancy

MEP Design EngineerB.SC Electrical Engineer approved by DEWA &amp; DCD with minimum of 5 Years experience with the Consultant in Dubai, UAE.System Design: Create detailed blueprints and schematic diagrams for HVAC (heating, ventilation, air conditioning), electrical power distribution, lighting, and plumbing networks.Technical Calculations: Perform critical load calculations, such as heating/cooling requirements and electrical power demands, to size equipment correctly.Coordination &amp; Integration: Collaborate closely with architects and structural engineers to resolve &quot;clashes&quot; (e.g., ensuring a pipe doesn't go through a beam) using Building Information Modeling (BIM) software.Compliance &amp; Safety: Ensure all designs strictly adhere to local and international building codes (e.g., NFPA for fire safety, ASHRAE for HVAC) and safety regulations.Sustainability: Implement energy-efficient solutions and green building standards, often aiming for certifications like LEED or BREEAM.Coordination with the related authorities DEWA, SEWA, FEWA, DCD, SCD, ACD, Etisalat, DU and MEP Consultant for outsourced jobs.Project Oversight: Review contractor shop drawings, conduct site inspections to verify installation quality, and participate in the final testing and commissioning of systems.Pay: From AED7,000.00 per monthWork Location: In person

MEP Design Engineer

McDermott

<div>Job Overview:
The Senior Commissioning Engineer uses best practices and knowledge of internal or external issues to improve the Commissioning discipline within McDermott. They will act as a resource for colleagues with less experience and share their conceptual and practical expertise related to the Commissioning discipline. The Senior Commissioning Engineer solves complex problems and uses their discipline-specific knowledge to improve their products or services. They impact a range of customer, operational, project, or service activities with the Commissioning team and other related teams and ensure that they are working within the appropriate guidelines and policies.</div>
 <div><div>Our ingenuity fuels daily life. Together, we&rsquo;ve forged some of the most trusted partnerships across the energy value chain to make what was once just an idea a reality: laying subsea infrastructure thousands of feet below sea level, installing platforms hundreds of miles from shore, using our expertise to design and build offshore wind infrastructure, and reshaping the onshore landscape to deliver the energy products the world needs safely and sustainably.
 
 
For more than 100 years, we've been making the impossible possible. Today, we're driving the energy transition with more than 30,000 of the brightest minds across 54 countries.</div></div>
 <div>Key Tasks and Responsibilities:
<ul><li>Report to the Commissioning Manager and provide support to the Principal Commissioning Engineer in the preparation of home office deliverables
</li><li>At the site, the Senior Commissioning Engineer will participate in walk-down inspections, punch listing, and testing including troubleshooting of mechanical, electrical &amp; instrument component issues that can arise on the project
</li><li>Work collaboration within the Project team and with the Client to maintain positive relationships
</li><li>Required to support the commissioning team with performing any of the following activities as a minimum
<ul><li>Operate and maintain Manuals development
</li><li>Commissioning and Start-up Spares development
</li><li>First Fills and Consumables development
</li><li>Commissioning, and Start-Up Procedures
</li><li>Discipline Equipment system checks and tests
</li><li>Function testing of mechanical, electrical, and instrument systems
</li><li>Participate in Commissioning, Start-Up and Performance Testing
</li><li>Resolve operational and maintenance issues during Commissioning, Start-Up, and Performance Tests
</li></ul></li><li>Supervise craft personnel required for site pre-commissioning and commissioning activities
</li><li>Coordinate activities with other engineers in the commissioning team
 </li></ul>Reports to:
 
Project: Project Commissioning Manager
 
Functional: Function Commissioning Manager
 
Liaise with: Commissioning Manager, Discipline Lead Engineers, Project Engineers, Construction/Fabrication team
 
Supervises: Commissioning Engineers, Completions Specialists, Operation &amp; Maintenance specialists, Designers, and support
 
personnel within the function group</div>
 <div>Essential Qualifications and Education:
<ul><li>Bachelor&rsquo;s degree or equivalent in Engineering
</li><li>8-15 years of experience in oil and gas with a major contractor or consultant
</li><li>Requires a good understanding of concepts, principles, and practices in commissioning, completions, and training as well as basic knowledge of other functions, such as construction and operations &amp; maintenance
</li><li>Applies understanding of the industry to improve effectiveness
</li><li>Preferably possess a degree or diploma or equivalent in engineering
</li><li>Have a minimum of 5 years of experience in a chemical, refinery, or oil &amp; gas processing facility
</li><li>Prefer 2+ years of previous commissioning and start-up experience in the chemical, refinery, or oil &amp; gas industry
</li><li>Able to effectively communicate technical solutions and concepts to other engineers and non-engineers
</li><li>Must have good computer software skills in MS Word, Excel, PowerPoint, and Visio
</li><li>Must have good organizational skills and be adaptable to the needs of various discipline groups
</li><li>Must have the ability to assess and communicate project requirements and expectations in a clearly defined, positive, and productive manner
</li><li>Willing and able to travel to construction sites on assignments to international sites
</li>Proficiency in English, Multi-Language skills a plus 
<li>
</li></ul>#LI-AL2</div>

Senior Commissioning Engineer (Telecom)

Senior Commissioning Engineer

Laserix for Medical, Surgical Equipment & Instruments Trading Co. LLC

Laserix is seeking a highly skilled and experienced Electronics Repair Engineer to diagnose, repair, and restore electronic systems of aesthetic and medical laser equipment. The successful candidate must be capable of independently troubleshooting and repairing power supplies, motherboards, control boards, electronic modules, and other electrical components used in aesthetic medical devices without requiring constant supervision.This role is ideal for an electronics specialist with strong analytical and hands-on repair skills who enjoys solving complex technical problems down to the component level.Key ResponsibilitiesDiagnose, troubleshoot, and repair electronic failures on aesthetic and medical laser equipment.Perform component-level repair of:<ul><li>Switching Power Supplies (SMPS)</li><li>High Voltage Power Supplies (HVPS)</li><li>Motherboards</li><li>Main Control Boards</li><li>Driver Boards</li><li>Interface Boards</li><li>Communication Boards</li><li>Electronic Modules</li></ul>Identify defective components such as:<ul><li>MOSFETs</li><li>IGBTs</li><li>Capacitors</li><li>Transformers</li><li>Relays</li><li>Resistors</li><li>Diodes</li><li>Optocouplers</li><li>Integrated Circuits (ICs)</li><li>Microcontrollers</li></ul>Repair laser power systems, cooling systems, and electrical circuits.Read and interpret electrical schematics and PCB layouts.Perform soldering, desoldering, PCB repair, and component replacement.Use diagnostic equipment including:<ul><li>Digital Multimeter</li><li>Oscilloscope</li><li>LCR Meter</li><li>Function Generator</li><li>Power Supply Tester</li></ul>Conduct testing and calibration after repair.<ul><li>Maintain repair documentation and technical reports.</li><li>Ensure all repaired equipment meets safety and operational standards.</li><li>Support field service engineers with advanced electronic troubleshooting when required.</li><li>Recommend improvements to increase equipment reliability and reduce recurring failures.</li><li>Maintain inventory of electronic spare parts and repair components.</li></ul>Required Qualifications<ul><li>Bachelor's Degree or Diploma in Electronics Engineering, Electrical Engineering, Biomedical Engineering, Mechatronics Engineering, or equivalent technical qualification.</li><li>Minimum 5 years of experience repairing electronic boards and power supplies.</li><li>Experience with medical or aesthetic equipment is highly preferred.</li></ul>Strong knowledge of:<ul><li>Analog Electronics</li><li>Digital Electronics</li><li>PCB Repair</li><li>Power Electronics</li><li>High Voltage Systems</li><li>Electronic Troubleshooting</li><li>Ability to repair electronic boards at component level, not only board replacement.</li><li>Ability to work independently with minimal supervision.</li></ul>Technical SkillsThe ideal candidate should have experience repairing:<ul><li>Medical Laser Systems</li><li>IPL Systems</li><li>RF Equipment</li><li>HIFU Systems</li><li>Cryotherapy Systems</li><li>Cooling Machines</li><li>Medical Power Supplies</li><li>High Voltage Circuits</li><li>SMPS</li><li>HVPS</li><li>Laser Control Boards</li><li>Touch Screen Control Systems</li><li>Embedded Electronic Systems</li></ul>Preferred ExperienceExperience with one or more of the following brands is an advantage:<ul><li>Candela</li><li>Cynosure</li><li>Lumenis</li><li>Alma Lasers</li><li>Lutronic</li><li>Quanta System</li><li>Deka</li><li>Fotona</li><li>Zimmer</li><li>Hydrafacial</li><li>IRIS</li><li>BTL</li></ul>Personal Competencies<ul><li>Strong troubleshooting mindset</li><li>Excellent analytical skills</li><li>Detail-oriented</li><li>Self-motivated</li><li>Able to work under pressure</li><li>Independent decision-maker</li><li>Strong documentation skills</li><li>Team player with good communication skills</li><li>High integrity and professionalism</li></ul>What We Offer<ul><li>Competitive salary based on experience.</li><li>Opportunity to work with leading aesthetic medical technologies.</li><li>Career growth within a rapidly expanding medical equipment company.</li><li>Exposure to advanced laser and electronic repair technologies.</li><li>Professional and supportive working environment.</li></ul>Work Location: In person

Electronics Repair Engineer – Aesthetic Medical Equipment

Tate

<div>Location: UAE (Regional Travel Required)
Reporting to: Senior Solution manager
Duration of Role: Permanent
Company: Tate<h1 class="jobSectionHeader"> 
About Tate</h1> 
At Tate we are passionate about everything we do. As part of the Kingspan Group, Tate is a global leader in data centre infrastructure solutions. Across the Middle East, Tate supports rapid growth in hyperscale and enterprise data centres driven by digital transformation, cloud adoption, and major national programmes such as Vision 2030.<h1 class="jobSectionHeader"> 
About the Role</h1> 
The Sales Engineer provides technical leadership throughout the pre-sales cycle for liquid cooling solutions across the Middle East data centre market. This includes CDU integration, manifold systems, and facility-to-rack coolant distribution.
The role works closely with Sales, clients, and regional project stakeholders to translate hyperscale requirements into scalable, manufacturable solutions aligned with regional design practices and environmental conditions.<h1 class="jobSectionHeader"> 
Key Responsibilities</h1> 
 Partner with Sales Managers to qualify opportunities, analyse customer specifications, and define solution strategies.
 Participate in customer meetings, design reviews, and onsite walkthroughs to advise on manifold architecture and cooling integration.
 Develop concept-level solutions such as flow diagrams, manifold layouts, routing plans, and hydraulic assumptions.
 Prepare technical proposal content including P&amp;ID markups, flow/pressure calculations, material selections, and integration notes.
 Analyze thermal loads, supply/return temperatures, coolant types, delta-T requirements, and liquid-cooled rack densities.
 Size and specify manifold headers, branches, valves, quick connects, hoses, sensors, and monitoring components.
 Evaluate hydraulic performance (flow balancing, pressure drops, pump head requirements, redundancy strategies).
 Develop CDU integration concepts, including layout, piping, interconnects, and control interfaces.
 Assess manufacturability, modularization, shipping splits, assembly needs, and site installation constraints.
 Ensure compliance with hyperscale liquid cooling specifications (would omit if publishing)
 Work with Design and Engineering to validate sizing, materials, weld requirements, pressure ratings, and model performance.
 Collaborate with Estimating to ensure accurate pricing for materials, valves, hoses, welding, testing, and labor.
 Produce clear technical handover packages for downstream engineering and manufacturing teams.
 Stay up to date on hyperscale liquid cooling roadmaps, including D2C, RDHX, and facility water trends.
 Track competitors offer differentiation opportunities.
 Provide structured feedback to R&amp;D to support next-generation modular manifolds, piping skids, and scalable cooling platforms.
 Support internal standardization efforts (design kits, templated P&amp;IDs, component libraries, routing standards, installation guides).
 Contribute revenue and win-rate targets through accurate, compelling technical proposals.
 Maintain detailed notes, assumptions, risks, and customer feedback in CRM.
 Participate in bid reviews, technical clarifications, and RFI responses.
 Work seamlessly in a fast-paced, evolving technical environment with changing customer requirements.
 Communicate clearly and confidently with customers and internal teams, including non-technical stakeholders.
 Manage multiple projects simultaneously while maintaining high attention to detail.
 Proactively identify risks, gaps, or ambiguities in requirements and propose solutions.
 Support cross-team alignment to ensure manufacturability, quality, and deployment readiness. 
IMS Responsibilities 
 Adhere to the Employee Handbook, Group Code of Conduct, the Group Compliance Policy, the IMS Policy, and all other applicable company policies and procedures.
 Maintain awareness of the requirements of, and their individual contribution to and impact on the effectiveness of, the Integrated Management System (IMS), including Quality, Health &amp; Safety, Environmental and Product Compliance objectives and requirements.
 Report on unsafe acts, unsafe conditions, incidents, and injuries, quality issues, compliance concerns, violations to the appropriate personnel without delay.
 Participate in required training, audits, and continuous improvement initiatives.<h1 class="jobSectionHeader"> 
Qualifications, Experience &amp; Skills</h1><h2 class="jobSectionHeader"> 
Education</h2> 
Degree in Mechanical Engineering or related discipline<h2 class="jobSectionHeader"> 
Experience</h2> 
 3-7 years experience in cooling, HVAC, hydronics, or data centre engineering
 Experience in mission-critical or data centre projects
 Experience engaging with clients, consultants, and contractors
 Understanding of pre-sales and technical solution development<h2 class="jobSectionHeader"> 
Skills</h2> 
 Strong understanding of liquid cooling systems and hydraulics
 Ability to interpret P&amp;IDs and technical documentation
 Strong communication and presentation skills
 Ability to manage multiple projects and deadlines
 Highly organised and detail oriented</div>

Sales Engineer Liquid Cooling

McDermott International, Ltd

<div>
 
 Job Description
 
 
 
 
 Job Overview:
 
 
 
 The Senior Construction Support Engineer is responsible for interpreting internal or external business issues and recommending best practices. They will be tasked with solving complex Construction Support (Eng) -related problems and will work independently with minimal guidance. The Senior Construction Support Engineer may be responsible for leading functional teams or projects and is regarded as a specialist in Construction Support (Eng). As such, they must have in-depth expertise in Construction Support (Eng) as well as broad knowledge of the Construction Support (Eng) discipline within the Engineering function.
 
 
 
 Responsibilities
 
 
 
 
 Key Tasks and Responsibilities:
 
 
 
 <ul>
 <li>
 Perform conceptual, FEED, Studies, and detailed analyses and design as per design basis, project specifications, design codes, and standards
 </li>
 <li>
 Direct Engineering team as a Project Coordinator on small projects
 </li>
 <li>
 Apply knowledge and skills to a wide range of standard and nonstandard situations
 </li>
 <li>
 Prepare clear and accurate detailed design calculations and analyses including design reports and procedures
 </li>
 <li>
 Manage own time to meet agreed deadlines and budgets and develop plans for short-term work activities in own area
 </li>
 <li>
 Clearly communicate and explain complex issues and work to establish understanding
 </li>
 <li>
 Be fully familiar with the project scope of work, specifications, schedule, and all inter-discipline requirements; including identifying concerns as early as practicable and taking appropriate initiatives to address the issues
 </li>
 <li>
 Identify changes to scope and promptly raise change notifications, including providing any necessary supporting documentation and estimates Provide similar support for Variation Orders
 </li>
 <li>
 Interface with all disciplines to develop clash-free designs
 </li>
 <li>
 Interface with other departments to obtain input for discipline designs and drawings
 </li>
 <li>
 Maintain close cooperation with other engineering disciplines, Planning, Fabrication, Marine, and Project Management Teams, as required
 </li>
 <li>
 Document substantive communications (communications that result in significant decisions or assignment of actions) and forward copies to Discipline Lead Engineer and Discipline Manager
 </li>
 <li>
 Assist in the preparation of estimates for bid proposals, including technical query reviews, execution statements, and manhour estimates
 </li>
 <li>
 Raise technical queries to obtain missing information, clarify work scope, and maintain preferred McDermott procedures, specifications, standards, practices, and operational requirements
 </li>
 <li>
 Prepare Discipline engineering design basis, philosophies, and technical specifications, as required
 </li>
 <li>
 Participate in finalizing deliverables lists and deliverables, ensuring compliance with specifications and functional integrity
 </li>
 <li>
 Attend project review meetings, vendor meetings, engineering meetings, and offshore site surveys, as required
 </li>
 <li>
 Provide technical direction and review of Designers producing products related to Construction/Installation Support Engineering
 </li>
 <li>
 Prepare and review design reports and procedures
 </li>
 <li>
 Assist in providing necessary design inputs to other disciplines to enable them to proceed with their deliverables
 </li>
 <li>
 When assigned, assist procurement personnel in producing Discipline equipment, materials, and services; ensuring that work produced complies with customer objectives and procedures Procurement assistance includes preparing and reviewing requisitions, evaluating technical quotations and preparing queries, compiling bid tabulations and recommendations, preparing purchase requisitions, and coordinating with Procurement to expedite vendor documents, as directed by Discipline Lead Engineer
 </li>
 <li>
 Check engineering performed by others within the Discipline
 </li>
 <li>
 Perform design verification through single-discipline check/inter-discipline check (IDC)
 </li>
 <li>
 Provide technical support to all fabrication queries, including identifying defect/rectification requirements
 </li>
 <li>
 Keep the Lead engineer apprised of all activities and concerns, technical, budgetary, and manpower related
 </li>
 <li>
 Assist in providing inputs for actual, planning, and forecasting progress reports including associated productivity
 </li>
 <li>
 Participate in internal, Customer, and third-party technical audits on engineering deliverables and vendor documents
 </li>
 <li>
 Assist Lead engineer with responses to Customers and other agencies (such as certifying authorities, auditors, third parties, etc.) on their review and approval
 </li>
 <li>
 Capture lessons learned and enter into MDR&rsquo;s Lessons Learned system
 </li>
 <li>
 Act as a resource for colleagues with less experience
 </li>
 <li>
 Guide less experienced engineers on MDR and Discipline procedures, standards, worksheets, design calculations, software, requisitions, technical bid evaluations, technical queries, etc.
 </li>
 <li>
 Be aware of costs related to own work and of the discipline
 </li>
 <li>
 In FabCSE, perform/review designs, analyses, evaluations, calculations, and procedures such as:
 </li>
 <ul>
 <li>
 Erection sequences for jackets, topsides, and other structures
 </li>
 <li>
 Loadout procedures and guidance during the operations
 </li>
 <li>
 Construction lift analyses and procedures for activities such as floatover, stackings roll-ups, etc.
 </li>
 <li>
 Weighing procedures
 </li>
 <li>
 Design and detailing of miscellaneous fabrication yard items
 </li>
 <li>
 Crane arrangements and rigging arrangements
 </li>
 <li>
 Trailer arrangements/operations, including drawings and procedures
 </li>
 </ul>
 <li>
 Assist the Lead Engineer in coordinating critical operations pre-activity meetings and attend yard critical operations
 </li>
 <li>
 Additional skills (preferred, not mandatory) - perform/review Pipeline Installation Engineering designs, analyses, evaluations, calculations, and procedures for transportation and installation:
 </li>
 <ul>
 <li>
 Submarine pipelines
 </li>
 <li>
 Risers
 </li>
 <li>
 Spools
 </li>
 <li>
 PLETS and manifolds
 </li>
 <li>
 Cables
 
 </li>
 </ul>
 </ul>
 Reports to:
 
 
 Functional: Discipline Lead Engineer
 
 
 Liaise With: All Engineering disciplines, Fabrication Group, Safety Dept, Document Control, Procurement Group, Project
 
 
 Management Team, Subcontractors and Vendors, and Customers.
 
 
 Supervises: Engineers
 
 
 
 Qualifications
 
 
 
 
 Essential Qualifications and Education:
 
 
 
 <ul>
 <li>
 Bachelor&rsquo;s degree in Naval Architecture, Civil / Structural / Mechanical Engineering (Master&rsquo;s degree preferred)
 </li>
 <li>
 8-15 years of experience in oil and gas with a major contractor or consultant predominantly performing construction and installation design
 </li>
 <li>
 Strong working knowledge of many design techniques and analysis methods, and detailed knowledge of the content and application of standards codes and guidelines as applicable for onshore and offshore construction
 </li>
 <li>
 Preferably Registered Professional Engineer or member of a professional engineering society
 
 
 </li>
 </ul>
 
 About Us
 
 
 
 Our ingenuity fuels daily life. Together, we&rsquo;ve forged some of the most trusted partnerships across the energy value chain to make what was once just an idea a reality: laying subsea infrastructure thousands of feet below sea level, installing platforms hundreds of miles from shore, using our expertise to design and build offshore wind infrastructure, and reshaping the onshore landscape to deliver the energy products the world needs safely and sustainably.
 
 
 For more than 100 years, we've been making the impossible possible. Today, we're driving the energy transition with more than 30,000 of the brightest minds across 54 countries.
 
 
</div>

Senior Construction Support Engineer

<div><div>Job Overview:
</div>The Principal Structural Engineer is responsible for interpreting internal or external business issues and recommending best practices. They will be tasked with solving complex structural-related problems and will work independently with minimal guidance. The Principal Structural Engineer may be responsible for leading functional teams or projects and is regarded as a specialist in the field of structural engineering. As such, they must have in-depth expertise in structural engineering as well as broad knowledge of the structural discipline within the engineering function.</div>
 <div><div>Our ingenuity fuels daily life. Together, we&rsquo;ve forged some of the most trusted partnerships across the energy value chain to make what was once just an idea a reality: laying subsea infrastructure thousands of feet below sea level, installing platforms hundreds of miles from shore, using our expertise to design and build offshore wind infrastructure, and reshaping the onshore landscape to deliver the energy products the world needs safely and sustainably.
 
 
For more than 100 years, we've been making the impossible possible. Today, we're driving the energy transition with more than 30,000 of the brightest minds across 54 countries.</div></div>
 <div>Key Tasks and Responsibilities:
<ul><li>Perform conceptual, FEED, and detailed analyses and design as per design basis, project specifications, design codes, and standards
</li><li>Apply in-depth skills and broad knowledge of the business to address complex problems and nonstandard situations
</li><li>Prepare clear and accurate detailed design calculations and analyses including design reports and - procedures
</li><li>Manage own time to meet objectives and (as Lead Engineer) forecast and plan resource requirements
</li><li>Clearly communicate and explain difficult concepts and persuade others to adopt a point of view
</li><li>When acting as Lead Engineer, in addition:
<ul><li>Direct medium or large Engineering team as a Lead Engineer
</li><li>Lead the Discipline engineering design of the assigned work area and complete it within the planned schedule and budget, in accordance with standards, MDR, and project-specific procedures and to a high professional standard
</li><li>Plan, organize, and direct all aspects of Discipline execution on the assigned project including scope, deliverables, schedule, and all manpower resources - agree allocations with the Discipline Manager
</li><li>Ensure interfaces and deliverables are clearly identified
</li><li>Maintain responsibility for progress and productivity, identifying any required corrective action
</li><li>Act as project representative for the Discipline during meetings with Project Team,
</li><li>Customer discipline lead and relevant agencies such as certifying authorities, auditors, third parties, etc.
</li></ul></li><li>Train/mentor other employees in the department
</li><li>Assist and monitor MOPEX offices on projects
</li><li>Has a good understanding of the other engineering departments
</li><li>Initiate interface with other disciplines to obtain input for discipline designs
</li><li>Has a good understanding of construction/fabrication yard and client requirements
</li><li>Has commercial insight
</li><li>Helps to maintain unifi
</li><li>Prepare bid from sketching data, using experience
</li><li>Supervise engineers and designers
</li><li>Define scopes of work for engineering/construction fabrication yard
</li><li>Provide engineering support as required
</li><li>Perform engineering checks of drafting
</li><li>Perform engineering checks prepared by others within the discipline
</li><li>Perform design verification through single discipline check and assist with inter-discipline checks (IDC)
</li><li>Prepare MTOs of structures
</li><li>Prepare specifications
</li><li>Prepare subcontract
</li><li>Review of vendor data
</li><li>Prepare technical bid evaluations
</li><li>Assist in furthering the department
</li><li>Tasks as Engineering Specialist:
<ul><li>Coordinate and check the work of senior and junior engineers
</li><li>Conduct peer reviews on request
</li><li>Provide technical assistance where required
</li><li>Prepare structural analyses and reports on calculations or perform specialist tasks (i.e., architectural designs, underground piping designs, complex structures, topsides, jackets, weight control reports, the center of gravity reports)
</li><li>Is specialized in several fields (geotechnical, steel, concrete, dynamic calculations, FEM, fatigue calculations, earthquake, jackets, FPSOs, blast, hydrodynamics, architectural, &hellip;)
</li><li>Is specialized in several design codes (EC, ACI/AISC/API, GOST, &hellip;)
</li><li>Check designs for operational requirements, constructability, and maintainability
</li><li>Prepare project engineering guides
</li></ul></li><li>Tasks as Lead Engineer:
<ul><li>Work as Lead Engineer on medium to large-size EPC projects
</li><li>Responsible for all engineering and design work on any project
</li><li>Has full control and manages work hours, materials, progress
</li><li>Work in close liaison with the Design Coordinator
</li><li>Set up all engineering computer systems
</li><li>Assist Project Manager in:
<ul><li>Preparing deliverable control
</li><li>Preparing schedule
</li><li>Preparing progress reports
</li><li>Preparing man-hour and capital expenditure estimates
</li></ul></li></ul></li><li>Coordinate with project management
</li><li>Train personnel under their supervision
</li><li>Is responsible for discipline within the engineering group
</li><li>Manage (design) subcontracts
</li><li>Identify and manage changes in the scope of work
</li><li>Is responsible for filing of engineering work
</li><li>Give relevant feedback to the department
 </li></ul>Reports to:
 
Project: Lead Engineer, Project Engineering Manager, or Project Manager
 
Functional: Supervising Department Manager
 
Liaise with: All Engineering disciplines, Construction site/Fabrication Group, Safety Dept, Project Management Team,
 
Document Control, Project Planner, Project Cost Controller, QC and Certification Group, Procurement Group, Subcontractors
 
and Vendors, and Customers
 
Supervises: Senior Engineers, Engineers and Designers</div>
 <div>Essential Qualifications and Education:
<ul><li>Bachelor's Degree or Master's Degree in engineering
</li><li>15-20 years of experience in oil and gas with a major contractor or consultants predominantly performing detail design
</li><li>Preferably Registered Professional Engineer or member of professional engineering society as applicable
</li><li>Seasoned structural knowledge
</li><li>Very good organizer, motivator, and supervisor
</li><li>Able to solve problems without assistance
</li><li>Keen on improving the effectiveness of the work
</li><li>HSE, TQM and cost-conscious
</li><li>Fluent in English, both oral and written
</li><li>Understanding and supporting company goals and work processes
</li><li>Show flexibility and ensure proper hand-over with regards to:
</li><li>The reassignment to other departments/construction sites/fabrication yards
</li><li>The reassignment to other McDermott offices
</li><li>The replacement of colleagues during illness and holidays
</li><li>The provision of assistance to other colleagues with heavy workloads (also other projects) when possible/desirable
</li><li>The managing/learning of future current working methods and software applications
</li><li>Detailed knowledge of design techniques and analysis methods, and detailed knowledge of the theory, content, and application of standards, codes, and guidelines as applicable
</li><li>Knowledgeable in project coordination and execution skills
</li></ul>#LI-MW2</div>

Principal Structural Engineer

Explore 321+ Component design engineer in Dubai this July. Find roles across top companies and apply now to boost your career.