planning engineer

electrical engineer

mechanical engineer

facility engineer

field engineer

control systems engineer

Lana Al Arab Contracting

Instrumentation and Control Engineer<ul><li>B. Sc Engineering , preferably in Instrumentation</li><li>5 Years of Experience</li><li>Candidate should have experience in interpret loop diagrams, wiring diagrams, and technical specifications</li><li>Familiarity with control systems, such as PLCs (Programmable Logic Controllers) and SCADA (Supervisory Control and Data Acquisition) systems</li><li>Duration: 4 Months</li><li>Location: Doha, Qatar</li><li>Candidates must be in Qatar with a valid QID</li></ul>Job Type: Temporary Contract length: 1 monthApplication Question(s):<ul><li>Have you worked in Water Treatment / Desalination Plants project?</li><li>Are you ready to work for 4 months project?</li><li>Are you available to join immediately?</li></ul>Education:<ul><li>Bachelor's (Required)</li></ul>Experience:<ul><li>Instrumentation and Control Engineer: 5 years (Required)</li></ul>

Instrumentation and Control Engineer

Venture Gulf Engineering W.L.L

SCOPE OF JOBTo supervise the installation, maintenance, engineering and testing of a wide range of Metering package installations, instrumentation, control and automation systems for the assigned area or facilities.RESPONSIBILITIES<ul><li>Supervises the daily maintenance activities according to plans, work request priorities, and resource and material availabilities. Manages the planned completion time for each job. Ensures efficient and cost-effective completion of the metering system maintenance and engineering jobs of the assigned area/facilities.</li><li>Supervise during the accuracy verification testing on all Fiscal and internal balance measurement systems of both Gas and Crude Oil and Natural Gas Liquids.</li><li>Supervise during the routine CM &amp; PM of Fiscal, Custody Transfer, Check and Back-up metering systems.</li><li>Pocesses updated information and Understanding of measurement international standards</li><li>Able to guide technicians to work, maintaining, validation and troubleshoot faults on different types of flow computers, HMI&rsquo;s controller in different metering systems.</li><li>Able to guide technicians to work, maintaining, validation and troubleshoot faults on different types flow instruments such USM, Corilis, Turbine, Orifice inspection, &hellip; etc.</li><li>Able to guide technicians to work, maintaining, validation and troubleshoot faults on different types of control system, SCADA, PLC, &hellip; etc.</li><li>Possess the ability &amp; knowledge to advise technicians and operations to resolve queries, disputes for any metering related issues present in the plant.</li><li>Able to establish and maintain accurate recording and performance monitoring records for all metering related systems present in the plant.</li><li>To work in close liaison with Senior Metering Engineers and prepare all the required documents and equipment &amp; participate in all internal and customer related Gas Audits.</li><li>Able to correspond with vendors and contractors on metering issues and queries.</li><li>Receives daily maintenance and engineering work schedule, allocates work to subordinates, checks progress, and ensures that all metering systems checks, and tests are carried out prior to hand over to operations.</li><li>Updates SAP with actual man-hours for each work request executed by the Metering technicians. Inspects completed works to ensure QA/QC and conformity with work request.</li><li>Reviews stock levels to ensure that stocks are maintained at adequate levels for current and future work programs. Adopts &ldquo;Reverse Engineering Method&rdquo; in case the spares are not available in the store.</li><li>Manages the operation of Tool Store ensuring that consumables are regularly reordered and refurbished promptly.</li><li>Ensures compliance with maintenance and engineering work methods and procedures. Ensure systematic update of SAP/CMMS systems.</li><li>Takes Health, Safety &amp; Environmental (HSE) lead in ensuring &ldquo;safe systems of work&rdquo; and &ldquo;safe conditions&rdquo; are in place within area of responsibility.</li><li>Demonstrates visible commitment to HSE by periodically leading/taking part in risk assessments, audits, HSE meetings, emergency drills, etc.</li><li>Ensures assigned staff comply with all company HSE policies &amp; procedures and related initiatives.</li></ul>QUALIFICATIONS &amp; EXPERIENCE Educational Requirements / Qualifications:<ul><li>Bachelor&rsquo;s degree(4yrs) in Electronics/Instrumentation &amp; Control Engineering with 5 years&rsquo; experience or 03 years Diploma in electronic/instrumentation with 8-10 years&rsquo; experience</li></ul>Experience: <ul><li>Experience in Metering Instrumentation &amp; Control system maintenance from Oil &amp; Gas, petrochemical /refinery, Experience at the level of senior engineer would be an advantage.</li></ul>Job Type: Full-time

I&C Metering Supervisor (I & C)

Wood PLC

<div>Remarkable people, trusted by clients to design and advance the world
Wood has an opportunity for a Principal Instrument &amp; Controls Engineer to join our team in Qatar on a long-term basis. This is a key role within the Wood Doha office delivering across study, FEED, EPC and PMC scopes of work. In this role, you will be responsible for the execution of project work in accordance with the project execution plan, including Wood and/or Project Procedures on Safety and Quality Control within the man-hour, cost and the project schedule targets.</div>
 <div>Designing the future. Transforming the world
Reflecting the market focus for the office in both brownfield and green field opportunities, multi-skilled personnel are sought, in particular those with experience in:
Onshore Oil and Gas
 
Offshore Oil and Gas
What we can offer
<ul><li>Meaningful and interesting projects delivered to leaders of industry across oil and gas and emerging energy sectors
</li><li>Commitment to Diversity and Inclusion ; we are an organisation actively committed to diversity and inclusion across our busiess with employee networks committed to giving all employees a voice
</li><li>Competitive salary with regular salary reviews to ensure we are rewarding at the right level in line with the market
</li><li>Life Insurance ; Provides payment of 2 x Base Salary (up to a maximum of QAR 1 million) upon death
</li><li>End of Service Gratuity ; In line with Qatar Labor Law, upon completion of 1 years&rsquo; service employees are eligible for an End of Service benefit of three weeks for every year of service.
</li><li>Medical Insurance : Ensures cover (up to a maximum of QAR 250,000 per person, per year) is available should you require treatment. Pre-existing and/or chronic conditions are covered up to QAR 10,000.
</li><li>Employee Assistance Programme: Allows you to feel comfortable knowing that you or your immediate family members can confidentially discuss any work or personal issues that are an inevitable part of life. The programme helps support your mental, physical, social &amp; financial well-being.
</li><li>Professional Memberships; One professional membership, registration, subscription, certification and/or license cost per annum for all active Wood employees. The membership must be relevant to the role you are currently employed in or be part of a development plan. Reimbursement should be claimed via the expenses procedure system, with supporting evidence.
</li><li>Global connections : join experts around the world who are at the leading edge of our industry, shaping the standards of our profession
</li></ul>Typical responsibilities
<ul><li>Ensures Wood and Client Health, Safety, Environmental and Quality procedures are followed and that a high standard of safety is achieved in all associated work
</li><li>Serves as the Lead Engineer and/or discipline technical authority when required on medium to large complexity projects
</li><li>When assigned as the lead, manages the I&amp;C scope of work within the agreed budget and timeframe, ensuring that key milestones are met for the overall project delivery.
</li><li>Supervises less experienced I&amp;C engineers and, where required, be line manager for I&amp;C engineers within Qatar office
</li><li>Follows company standards and procedures to meet with schedule and budget as advised by the Engineering Manager
</li><li>Demonstrates appreciation of commercial and technical risks, managing these appropriately within own work and highlighting any significant issues to the Engineering Manager
</li><li>Provide C&amp;I input to tenders and project estimates in the development of method statements, deliverable lists, manhours, CTRs and risk
</li><li>Ensures the delivery of challenging corporate, project and client targets using sound technical knowledge and decision-making skills
</li><li>Acts as Wood&rsquo;s technical representative for the I&amp;C discipline in design reviews such as HAZOP, LOPA, SIL and F&amp;G mapping studies. In this capacity also closely coordinates with clients and third parties
</li><li>As a technical specialist demonstrates, provides and develops appropriate technical solutions for specific project issues
</li><li>Proactively engages and interfaces with other disciplines / third parties to ensure delivery of work scope to meet project and client expectations
</li><li>Produces, review, and take accountability for the accuracy of detailed calculations, Instrument and Control engineering datasheets and other engineering deliverables to define the I&amp;C and F&amp;G engineering requirements of our projects. Such deliverables including but not limited to the following:
<ul><li>The design basis, instrument schedules/index, sizing calculations and instrument datasheets (control valve, relief valves, flow / pressure / level instruments, cable, etc), Control &amp; Shutdown System Philosophies, etc.
</li><li>Preparation and development of enquiry packages including Specifications, Datasheets, Request for Quotation and Technical Bid Evaluation.
</li></ul></li><li>Provide direction and guidance to designers in the production of I&amp;C drawings such as field instrument &amp; LER layouts, routing &amp; layout drawings (cable, tray, MCT, etc), wiring &amp; termination &amp; loop diagrams,
</li><li>Reviewing, checking and approving of the I&amp;C deliverables to ensure accuracy and alignment with the scope of work prior to issue
</li><li>Works closely with Process Engineering for the timely completion of P&amp;IDs and Cause &amp; Effects to meet with project deadlines, providing input as necessary for the instrumentation and controls
</li><li>Reviews and approves material take off for the I&amp;C discipline
</li><li>Completes technical reviews and audits within the I&amp;C discipline for projects of varying complexity
</li><li>Completes site surveys and data gathering activities for brownfield scopes of work
</li><li>Remain up to date with the latest technical developments in your fields of expertise
</li><li>Takes a proactive approach to personal &amp; professional development
</li><li>Seek and support opportunities for department and project improvement and contribute to developing solutions
</li><li>Support recruitment, training and development of I&amp;C personnel</li></ul></div>
 <div>Skills And Qualifications
What makes you remarkable?
At Wood, we are committed to equal opportunities and welcome all talented individuals to consider joining our team. So even if you don't match every statement below but feel you have some of the experience, knowledge or skills needed for this role, we encourage you to apply. It will take all of us working together to deliver solutions to the world&rsquo;s most critical challenges.
Experience:
<ul><li>Engineering Degree in Instrumentation &amp; Control, Electrical &amp; Electronics Engineering or similar with a minimum of 15 years of relevant experience
</li><li>Enrolled on the Register of Engineers in the State of Qatar, Grade A Category as a mandatory requirement
</li><li>If not enrolled on the Register of Engineers in the State of Qatar, then candidates must be a Chartered Engineer
</li><li>T&Uuml;V Function Safety Certification is desirable
</li><li>Further education and experience with Cyber Security Systems is desirable
</li><li>Proven core Instrument &amp; Control Engineering skills, including design experience in the Oil &amp; Gas sector
</li><li>Familiar with third party control system architecture and design including Honeywell, Yokogawa, Emerson, Invensys, Siemens and ABB for example
</li><li>Familiarity and experience with PAS, DCS, SCADA and PLC control systems including fieldbus technologies and the various communication protocols
</li><li>Experience with ESD, F&amp;G and Condition Monitoring Systems design
</li><li>Experienced with completing SIL assessments, SIL verification, and SIS architecture design
</li><li>Familiarity and experience with instrument design tools such as SPI (INTOOLS)
</li><li>Experienced and well versed with HAZOP / SIL / LOPA, capable of representing the discipline as the technical authority in such studies
</li><li>Experience and knowledge of Telecoms engineering and design is desirable, including an awareness of relevant international design codes and standards such as IA/TIA and ETSI
</li><li>Experience with Telecoms systems such as LAN, CCTV, PA/GA, UHF/VHF Radio, Microwave and Access Control for example is desirable
</li><li>Experience with management of vendors, able to complete Technical Bid Evaluations and oversee development of vendor scope
</li><li>Experience completing factory acceptance tests for a range of instrumentation and control systems is desirable
</li><li>Construction and site experience is desirable, with exposure to loop checking, installation and problem solving of transmitters, pressure switches, level switches, control valves, F&amp;G detectors, flow meters and MOVs
</li><li>A self-motivated, proactive individual with high achievement drive and initiative, excellent verbal and written communication skills and good organisational awareness
</li><li>Ability to impact and influence fellow workers
</li><li>Display analytical and innovation skills to manage new technology
</li><li>Familiar with and experience in the application of international design codes and standards such as ISA, NFPA, BS, API, IEC, NACE, NEMA, ANSI, etc
</li><li>Ideally has experience with Qatar O&amp;G customer design standards including Shell DEPs</li></ul></div>
 <div><div>Wood is a global leader in consulting and engineering, helping to unlock solutions to critical challenges in energy and materials markets. We provide consulting, projects and operations solutions in 60 countries, employing around 35,000 people. www.woodplc.com 
</div><div></div> 
<div>Diversity Statement
</div><div>We are an equal opportunity employer that recognises the value of a diverse workforce. All suitably qualified applicants will receive consideration for employment on the basis of objective criteria and without regard to the following (which is a non-exhaustive list): race, colour, age, religion, gender, national origin, disability, sexual orientation, gender identity, protected veteran status, or other characteristics in accordance with the relevant governing laws.</div></div>

Principal Instrumentation & Controls Engineer

Worley

<div>
 
 Building on our past. Ready for the future
 
 
 
 Worley is a global professional services company of energy, chemicals and resources experts. We partner with customers to deliver projects and create value over the life of their assets. We&rsquo;re bridging two worlds, moving towards more sustainable energy sources, while helping to provide the energy, chemicals and resources needed now.
 
 
 
 Key Responsibilities
 
 
 
 <ul>
 <li>
 Demonstrate a visible and active commitment to HSE management and its associated requirements in a project environment
 </li>
 <li>
 A thorough knowledge of the regulations, codes and standards and a good understanding of onshore and offshore engineering practices applicable to Instrumentation &amp; Control design for oil and gas facilities.
 </li>
 <li>
 Extensive knowledge
 </li>
 <li>
 Experience in brown fields &amp; asset services type project / contracts.
 </li>
 <li>
 Excellent technical and practical engineering skills and able to consistently deliver quality, accurate and timely work to Worley and its clients.
 </li>
 <li>
 An excellent knowledge of the fundamental requirements of the Instrumentation &amp; Control discipline, and the basic requirements of other disciplines.
 </li>
 <li>
 An excellent knowledge of applicable local and international standards and statutory and regulatory requirements.
 </li>
 <li>
 Competent in the use of relevant Instrumentation &amp; Control discipline specific software.
 </li>
 <li>
 Extensive knowledge of design deliverables required for Conceptual, FEED and Detailed Design, and establishing the appropriate level of detail and checking required for each phase.
 </li>
 <li>
 Experience and good understanding of DCS, SIL 3 F&amp;G and ESD, PA/GA system
 </li>
 <li>
 Design and selection of instrumentation/equipment used on the onshore/offshore process facilities.
 </li>
 <li>
 A thorough knowledge of codes, standards and practice applicable to the design and installation of instruments (eg API, ISA, ANSI, AGA, ISO and IEC codes etc.)
 </li>
 <li>
 A thorough knowledge on the selection of equipment and materials for new projects and replacement in existing installation.
 </li>
 <li>
 Extensive experience in the design of microprocessor-based equipment such as SCADA/DCS, ESD, IPS Fire &amp; Gas Detection, Fire Protection Systems, metering, WHCP, etc.
 
 
 </li>
 </ul>
 
 IT Skills
 
 
 
 <ul>
 <li>
 Proficient in DCS, SIL 3 F&amp;G and ESD, PA/GA system will be preferred.
 
 
 </li>
 </ul>
 
 Quality Assurance
 
 
 
 <ul>
 <li>
 Responsible for working within the provisions and guidelines of the Quality Assurance systems.
 </li>
 <li>
 Work with project managers/project engineers to ensure all projects are set up and executed in full compliance with all the requirements of the Worley Project Management Process (WPMP) and General Management System (EMS) using consistent approaches, Work Breakdown Structures, work methodologies and reporting systems
 </li>
 <li>
 Monitors the closure of all identified risks and opportunities.
 
 
 </li>
 </ul>
 
 Safety
 
 
 
 <ul>
 <li>
 Responsible for personal safety safe working practices. Understand and follow OH&amp;S procedures.
 </li>
 <li>
 Promoting health, safety and environmental awareness.
 
 
 </li>
 </ul>
 
 HSE Capability
 
 
 
 <ul>
 <li>
 Maintain HSE focus with the team to ensure OHSE requirements.
 </li>
 <li>
 Demonstrate behaviour and business practices commensurate with a culture of world&rsquo;s best health, safety and environmental performance.
 </li>
 <li>
 Demonstrate a visible and active commitment to:
 </li>
 <li>
 personal well-being.
 </li>
 <li>
 healthy and safe workplaces and activities; and
 </li>
 <li>
 continuously improve Worley health, safety and environmental performance.
 </li>
 <li>
 Identify and report work hazards and incidents.
 
 
 </li>
 </ul>
 
 Industry Specific Experience
 
 
 
 <ul>
 <li>
 Extensive work experience at a senior level within the Oil &amp; Gas industry.
 </li>
 <li>
 Design and detail engineering experience within the oil and gas industry, leading a team of Instrumentation &amp; Control discipline engineers and designers
 </li>
 <li>
 Extensive technical, practical and leadership experience in the Instrumentation &amp; Control discipline in the same or similar industry, including experience managing and leading multi-disciplinary projects and teams.
 
 
 </li>
 </ul>
 
 Education &ndash; Qualifications, Accreditation, Training
 
 
 
 <ul>
 <li>
 Full-Time bachelor&rsquo;s degree in Instrumentation/Electronics Engineering from an accredited university
 </li>
 <li>
 MME (Ministry of Municipality and Environment) engineering accreditation is a mandatory requirement. Candidates not holding this accreditation must be willing to achieve this within the probationary period.
 </li>
 <li>
 Chartered Professional Engineer (CPEng) status or undertaking the same will be an advantage.
 
 
 </li>
 </ul>
 
 Moving forward together
 
 
 
 We&rsquo;re committed to building a diverse, inclusive and respectful workplace where everyone feels they belong, can bring themselves, and are heard. We provide equal employment opportunities to all qualified applicants and employees without regard to age, race, creed, color, religion, sex, national origin, ancestry, disability status, veteran status, sexual orientation, gender identity or expression, genetic information, marital status, citizenship status or any other basis as protected by law.
 
 
 We want our people to be energized and empowered to drive sustainable impact. So, our focus is on a values-inspired culture that unlocks brilliance through belonging, connection and innovation.
 
 
 And we're not just talking about it; we're doing it. We're reskilling our people, leveraging transferable skills, and supporting the transition of our workforce to become experts in today's low carbon energy infrastructure and technology.
 
 
 Whatever your ambition, there&rsquo;s a path for you here. And there&rsquo;s no barrier to your potential career success. Join us to broaden your horizons, explore diverse opportunities, and be part of delivering sustainable change.
 
 
 
 Company
 
 
 
 Worley
 
 
 
 Primary Location
 
 
 
 QAT-DW-Doha
 
 
 
 Job
 
 
 
 Instrumentation and Controls
 
 
 
 Schedule
 
 
 
 Full-time
 
 
 
 Employment Type
 
 
 
 Employee
 
 
 
 Management Level
 
 
 
 Individual Contributor
 
 
 
 Job Posting
 
 
 
 Oct 7, 2025
 
 
 
 Unposting Date
 
 
 
 Ongoing
 
 
 
 Reporting Manager Title
 
 
 
 Department Manager
 
 
</div>

Principal Instrumentation Engineer

Qatar National Cement Company

<div>
 
 
 Role Objective:
 
 
 
 Responsible for planning, executing, and maintaining all instrumentation and PLC control systems to ensure optimal plant reliability and performance. The role includes preventive and corrective maintenance of instruments, troubleshooting PLCs, implementing automation improvements, and ensuring compliance with quality and safety standards.
 
 
 
 
 
 
 Detailed Roles and Responsibilities Instrumentation Maintenance
 
 
 
 &middot;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;Plan and execute preventive, predictive, and corrective maintenance for field instruments such as pressure, temperature, level, and flow transmitters, analyzers, weigh feeders, and laboratory equipment.
 
 
 &middot;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;Perform instrument calibration, loop checking, and functional testing in coordination with process and electrical teams.
 
 
 &middot;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;Maintain calibration records in compliance with ISO and QA standards.
 
 
 &middot;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;Troubleshoot instrument faults and implement corrective actions to minimize downtime.
 
 
 
 
 
 
 PLC and Automation Systems
 
 
 
 &middot;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;Maintain and troubleshoot PLC systems (Siemens, ABB, Schneider, etc.).
 
 
 &middot;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;Modify and update PLC logic, ladder, or function block programming based on process and interlock requirements.
 
 
 &middot;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;Ensure all control system software, PLC programs, and configuration backups are properly maintained and documented.
 
 
 &middot;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;Support HMI/SCADA systems (WinCC, Wonderware, PCS7, etc.) for monitoring and control.
 
 
 &middot;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;Participate in the installation, commissioning, and startup of new instruments, PLC panels, and control systems.
 
 
 
 
 
 
 Documentation and Technical Review
 
 
 
 &middot;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;Review and verify P&amp;IDs, I/O lists, cable schedules, and loop diagrams.
 
 
 &middot;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;Maintain updated as-built drawings, wiring diagrams, and instrument data sheets.
 
 
 &middot;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;Support audits and inspections by providing accurate and complete maintenance documentation.
 
 
 
 
 
 
 Process Optimization and Reliability
 
 
 
 &middot;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;Collaborate with process engineers to optimize plant control loops for accuracy, stability, and energy efficiency.
 
 
 &middot;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;Analyze control system performance and recommend improvements (PID tuning, interlock review, etc.).
 
 
 &middot;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;Implement minor automation upgrades to enhance plant reliability and performance.
 
 
 
 
 
 
 Quality, Safety, and Compliance
 
 
 
 &middot;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;Ensure all instrumentation and control systems comply with functional safety (SIL) and hazardous area requirements.
 
 
 &middot;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;Follow all company HSE rules and LOTO (Lock-Out/Tag-Out) procedures during maintenance activities.
 
 
 &middot;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;Support risk assessments, root cause analysis (RCA), and corrective actions for major failures.
 
 
 &middot;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;Ensure adherence to ISO 9001, ISO 14001, and ISO 50001 standards.
 
 
 
 
 
 
 Key Skills and Competencies
 
 
 
 &middot;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;PLC Programming: Siemens S7/PCS7, Schneider, ABB, Rockwell RSLogix
 
 
 &middot;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;SCADA/HMI Systems: WinCC, Wonderware, PCS7
 
 
 &middot;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;Instrumentation: Calibration, troubleshooting, and maintenance of process instruments
 
 
 &middot;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;Control Systems: PID loop tuning, interlock logic, automation improvements.
 
 
 &middot;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;Software Tools: Step 7, WinCC, RSLogix, AutoCAD Electrical
 
 
 &middot;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;Industrial Communication Protocols: Profibus, Profinet, Modbus, Ethernet/IP, OPC
 
 
 &middot;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;Strong problem-solving, analytical, and teamwork skills.
 
 
 &middot;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;Excellent communication and documentation abilities.
 
 
 
 
 
 
 Qualifications
 
 
 
 &middot;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;Bachelor&rsquo;s Degree in Instrumentation Engineering, Electronics &amp; Communication, or Electrical Engineering.
 
 
 &middot;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;Experience: 5&ndash;10 years in industrial automation or process instrumentation, preferably in cement, oil &amp; gas, chemical, or power plant sectors.
 
 
 &middot;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;Fluency in English and Arabic (written and spoken).
 
</div>

Instruments & PLC Engineer

QatarEnergy LNG

<div>
 Job description:
 
 
 
 Part A: Job Specification
 
 Job Purpose
 <ul>
 <li>
 Provide technical support for all Offshore Expansion Sustainability &amp; Startup department (OESS) and third-party projects, support deliverables and maintenance activities during dynamic commissioning, early operations and facilitate effective transition of projects into sustainable Producing Assets. Ensure the availability and reliability of the new turbo machinery packages in accordance with established procedure.
 </li>
 </ul>
 Job Context &amp; Major Challenge(s)&nbsp;
 <ul>
 <li>
 Operate in a technical environment handling complex and critical turbine control systems. The major challenge is to ensure efficient call out support to resolve unplanned disruptions of these machines.
 </li>
 <li>
 Provide advice to Operations for abnormal gas turbine operation behaviour.
 </li>
 <li>
 Provide ongoing advice related to turbine control, New Technical Information Letter (TIL), Notice Information Confirmation (NIC) implementation, New Technology application and enhancement improvements.
 </li>
 <li>
 Support preparation and execution of planned and unplanned gas turbines shutdowns from I&amp;C discipline.
 </li>
 </ul>
 Key Job Accountabilities - I
 <ul>
 <li>
 Perform function testing of gas turbine, compressor and pump control and logic functions. Participate in the Factory Acceptance Tests (FAT), Site Acceptance Tests (SAT) and other applicable Project System Completion activities related to new control systems.
 </li>
 <li>
 Supervise the execution of gas turbines preventative and corrective maintenance quality program and support operations and asset maintenance with day-to-day troubleshooting.
 </li>
 <li>
 Troubleshoot control and machinery issues and trips related gas turbine, compressor, and pumps. Respond to callouts related to gas turbine and compressor operation issues at all times.
 </li>
 <li>
 Coordinate, supervise and support machinery start-ups with the aim of safe, reliable, and efficient initial operation of gas turbines and its associated systems.
 </li>
 <li>
 Support engineering in feasibility studies and implementation of eMOC recommendations. Support Cyber-Security team to implement hardening and antivirus update within Human Interface Machine (HMIs).
 </li>
 </ul>
 <ul>
 <li>
 Provide inputs to Reliability Centred Maintenance (RCM) team for improving system maintenance strategies.
 </li>
 <li>
 Participate and contribute to Root Cause Failure Analysis (RCFA), risk screening and Formal Risk Assessment (FRA).
 </li>
 <li>
 Provide inputs to the budget, IT demand plan and technical training plan etc. to contribute to essential information and data for more informed, accurate and effective plans.
 </li>
 <li>
 Provide inputs to requirements of Spares and raise Stock Amendment Request (SAR) as per requirements.
 </li>
 <li>
 Support review and development of maintenance procedures and provides in house technical trainings to develop competency of other Engineers/Technicians as a part of technical competency program.
 </li>
 </ul>
 Qualifications
 <ul>
 <li>
 Bachelor&rsquo;s degree in engineering.
 </li>
 </ul>
 Knowledge and/or Experience - I
 <ul>
 <li>
 4 years&rsquo; experience in gas turbine control system applied in oil and gas or energy sector.
 </li>
 <li>
 Extensive experience in gas turbine control system (GE, Siemens, Solar). Knowledge on Turbo-Compressor and Turbo-Generator with DLN system operating philosophy, challenges, and constraints.
 </li>
 <li>
 Good knowledge on Surge Logic, Load Sharing and Capacity Control application for centrifugal compressors.
 </li>
 <li>
 Experience in instrumentation used in turbo machinery application.
 </li>
 <li>
 Knowledge of distributed controls system and emergency shutdown systems.
 </li>
 <li>
 Ability to interpret and troubleshoot logic function, interface issues.
 </li>
 <li>
 Experience in Fire &amp; Gas Detection Systems for gas turbine enclosures and Water Mist suppression system.
 </li>
 <li>
 General understanding of hazardous area classification and international standards.
 </li>
 <li>
 Exposure to international standards and best practices of oil and gas industry.
 </li>
 </ul>
</div>

Turbine Control Engineer

Senior Engineer-ELV SystemExperience: 8-10 years of experienceDuration: 6 months, extendableLocation: Doha- Hands-on Experienced in VM/ Server and storage level configuration and troubleshooting- Experienced in CCTV VMS system design and implementation- &#8288;Basic knowledge in IT networks- &#8288;Basic troubleshooting knowledge for Port communications- &#8288;Good communication skills- &#8288;Experienced in MOI SSD DSA and DIA regulations- &#8288;Other ELV system experience like, Milestone, Avigilon VMS, ACS, Physical security systems.Require *Immediate joiners from Qatar with Valid QID*Job Types: Full-time, Contract Contract length: 1 monthApplication Question(s):<ul><li>Do you have customer place experience? if yes how many years?</li><li>Can you join immediately?</li></ul>Experience:<ul><li>Senior Engineer-ELV System: 10 years (Required)</li></ul>Location:<ul><li>Doha (Required)</li></ul>

Senior Engineer-ELV System

Explore 1830+ Control systems engineer in Doha this October. Find roles across top companies and apply now to boost your career.