senior electrical engineer Jobs in Muscat

senior electrical engineer

construction manager

project engineer

capital project director

control system specialist

lead commissioning specialist

GE Vernova

<div>
 
 Job Description Summary
 
 
 
 This position is responsible for handling all DCS/CS activities in the field for all GEV-GA projects, including on-shore, off-shore, in Oman and to support UAE remotely.
 
 
 The successful candidate will closely coordinate his activities with DCS Engineering &amp; Field Service team, Project management, Application and After Sales. This position will report to GA Gulf Cluster Engineering &amp; Field Services leader.
 
 
 
 Job Description
 
 
 
 
 Roles and Responsibilities
 
 
 
 <ul>
 <li>
 Shall be capable of preparing Signal List from Schematics and other applicable documents.
 
 
 </li>
 <li>
 Shall have sufficient knowledge to prepare Interlocking documents from Main PLD.
 
 
 </li>
 <li>
 Responsible for the Field Services activity of the Substation Automation Systems including DCS/SCS, RTU and Cyber security.
 
 
 </li>
 <li>
 Take the complete ownership of technical activities for assigned projects (EHS coordination and follow up, Site Survey, Engineering, Design, Follow Up and Support Panels Integration, Pre-FAT Internal Validation, FAT with customer, Supervise Site installations, Conduct Site Testing and commissioning, Site Red mark-up and As Built Drawings, system troubleshooting and rectification.
 
 
 </li>
 <li>
 Perform, coordinate, and record tests for digital inputs, controls, measurements, interlocks, IEC61850 IED&rsquo;s and SCADA signals.
 
 
 </li>
 <li>
 Perform, coordinate, and record tests for SCS/CS complex functionalities.
 
 
 </li>
 <li>
 Perform, coordinate, and record tests for NCC/DCC with standard protocols.
 
 
 </li>
 <li>
 Inform and report on time to the SCS Engineer in charge.
 
 
 </li>
 <li>
 Prepare As-Built documentation for SCS documents (consoles, data lists, IP address plans, connectivity drawings).
 
 
 </li>
 <li>
 Prepare images and backups for PCs installed at the site.
 
 
 </li>
 <li>
 Create backups for switches, GPS equipment &amp; other DCS equipment&rsquo;s installed at the site.
 
 
 </li>
 <li>
 Demonstrate good communication and writing skills, with experience in preparing and presenting reports to multiple persons.
 
 
 </li>
 <li>
 Lead the design of the Substation LAN networks, configuration of industrial computers, ethernet switches, Firewall routers and satellite clocks according to project design.
 
 
 </li>
 <li>
 Lead the installation of the SCS system at the site (Fiber optic layout, PC installation at panels, SCS consoles wiring, CS installation, and testing).
 
 
 </li>
 <li>
 Prepare and install labels for Fiber optics and Ethernet cables.
 
 
 </li>
 <li>
 Project planning to ensure timely achievement of project milestones as per project schedule
 
 
 </li>
 <li>
 Responsible for FS installation, erection, and commissioning activities at sites.
 
 
 </li>
 <li>
 Shall experience in troubleshooting of network connectivity at field
 
 
 </li>
 <li>
 Shall have sufficient knowledge about network protocols in Substations
 
 
 </li>
 <li>
 Shall have sufficient knowledge Industrial protocols covering IEC61850, DNP3, IEC101/104, ModBUS etc
 
 
 </li>
 <li>
 Manage resource planning and workload to ensure a 90% and above billable ratio for assigned projects/sites.
 
 
 </li>
 <li>
 Support the operations team to control projects effectively in terms of budgeted profitability, planning, and general reporting (internal/external). Ensure that agreements with customers for documentation lead times, delivery, reliability, and quality are achieved within the budgetary constraints agreed upon within the unit.
 
 
 </li>
 <li>
 Coordinate workplace EHS issues and ensure the availability of suitable PPE for T&amp;C personnel, both internal and subcontracted.
 
 
 </li>
 <li>
 Ensure commitments to customers are met in accordance with the contract, with clear feedback through consistent customer interaction (e.g., communication via phone, email, etc.) and customer meetings, periodic reviews, etc., for assigned projects/sites.
 
 
 </li>
 <li>
 Knowledge of schemes and application of IEDs (e.g., BCUs, BMPs, BCUPs, protection relays, controllers, etc.) in electrical networks, including HV &amp; EHV systems, and state-of-the-art technologies in substation automation.
 
 
 </li>
 <li>
 Knowledge of competitor products is advantageous.
 
 
 </li>
 <li>
 Knowledge on GPG Software is preferable
 
 
 </li>
 <li>
 Shall have knowledge about HMI designing preferable GPG, AVIEW, Zenon etc
 
 
 </li>
 <li>
 Experience in managing sites for control systems is a distinct advantage.
 
 
 </li>
 </ul>
 
 Required Qualifications
 
 
 
 <ul>
 <li>
 Bachelor&rsquo;s degree in electrical or electronics engineering.
 
 
 </li>
 <li>
 Minimum 6 years' experience with DS Agile, PACiS, GPG, G500 and D2xx RTUs solutions.
 
 
 </li>
 <li>
 Knowledge of Sequencing &amp; interlocking principles used in substation automation systems and their implementation on IEC61850 IED&rsquo;s.
 
 
 </li>
 <li>
 Knowledge of Cyber security solutions implementation in the field of Substation Automation.
 
 
 </li>
 <li>
 Proficient in PC installation and troubleshooting, software installation and Microsoft Office software.
 
 
 </li>
 <li>
 Strong oral and written communication skills in English
 
 
 </li>
 <li>
 No travel restrictions.
 
 
 </li>
 </ul>
 
 Desired Characteristics
 
 
 
 <ul>
 <li>
 Process-focused. Quality-minded &amp; Customer-focused.
 
 
 </li>
 <li>
 Arabic is an added value.
 
 
 </li>
 <li>
 Open and honest communication, Proactive work style, creativity, high energy, Strong teamworking skills.
 
 
 </li>
 <li>
 Strong analytical thinking and problem-solving skills, define problems, collect relevant data, establish facts, and draw valid conclusions.
 
 
 </li>
 <li>
 Ability to work effectively under time pressure in complex projects/sites.
 
 
 </li>
 <li>
 Ability to write routine reports and correspondence.
 
 
 </li>
 <li>
 Ability to work on multiple tasks and meet strict deadlines.
 
 
 </li>
 <li>
 Understanding of the business in GULF clusters countries (Oman, UAE)
 
 
 </li>
 <li>
 Knowledge of GE-GA products and systems, especially automation.
 
 
 </li>
 </ul>
 
 
 
 Additional Information
 
 
 
 
 
 
 Relocation Assistance Provided:
 
 Yes
</div>

Lead Commissioning Specialist

Anotech

<div>
 
 
 Project Phase:
 
 
 
 Commissioning and Start-up preparation
 
 
 Commissioning and Start-up execution
 
 
 
 Professional Experience:
 
 
 
 +15 years&rsquo; experience in the Oil &amp; Gas industry with proven experience with large onshore plants and LNG plants. Several years of proven experience in Commissioning and operation stage of LNG projects. Proven experience in dealing with one or more the well-recognized ICSS vendors (Emerson, Yokogawa, Siemens, ABB, Honey well, Rockwell, Foxboro, etc).
 
 
 Experience in similar position (years): +10 years&rsquo; experience as ICSS Specialist.
 
</div>

Control System Specialist

Instrumentation and Telecom Specialist

Meranti Green Steel

<div>
 
 Purpose/ Mission:
 
 
 
 The Legal and Compliance Manager will serve as the lead legal architect for Meranti Green Steel&rsquo;s operations in Oman, overseeing all legal, regulatory, and compliance matters across the full project lifecycle.
 
 
 This role is critical in establishing and managing the legal and governance framework from pre-FID through construction, commissioning, and full operations, ensuring alignment with Omani laws, international best practices, and ESG standards.
 
 
 The position requires a hands-on leader capable of building legal and compliance structures from the ground up while supporting strategic decision-making and enabling efficient project execution.
 
 
 
 Key Responsibilities:
 
 
 
 
 Pre-FID Phase (Project Structuring &amp; Legal Strategy)
 
 
 
 <ul>
 <li>
 Develop and implement the overall legal strategy for project development in Oman
 </li>
 <li>
 Advise on optimal investment structures (JV, SPV, shareholder arrangements)
 </li>
 <li>
 Lead legal workstreams for:
 </li>
 <li>
 Joint Venture (JV) formation
 </li>
 <li>
 Shareholders&rsquo; Agreements
 </li>
 <li>
 Memoranda of Understanding (MoUs) and Heads of Agreement (HoA)
 </li>
 <li>
 Provide legal input into feasibility studies and FID decision-making
 </li>
 <li>
 Establish and maintain a comprehensive legal risk register
 </li>
 <li>
 Advise on:
 </li>
 <li>
 Oman Foreign Capital Investment Law
 </li>
 <li>
 Land rights, usufruct agreements, and industrial zoning
 </li>
 <li>
 Licensing and regulatory approvals
 
 
 </li>
 </ul>
 
 Project Development &amp; Construction Phase
 
 
 
 <ul>
 <li>
 Lead drafting, review, and negotiation of:
 </li>
 <li>
 EPC / EPCM contracts
 </li>
 <li>
 Technology licensing agreements
 </li>
 <li>
 Supply and offtake agreements (steel, hydrogen, energy)
 </li>
 <li>
 Support project financing activities:
 </li>
 <li>
 Loan agreements
 </li>
 <li>
 Security documentation
 </li>
 <li>
 Lender due diligence
 
 
 </li>
 </ul>
 
 Manage permitting processes:
 
 
 
 <ul>
 <li>
 Environmental approvals (EIA)
 </li>
 <li>
 Industrial and operational licenses
 </li>
 <li>
 Handle contractual claims, variations, and dispute avoidance/resolution
 
 
 </li>
 </ul>
 
 Compliance &amp; Corporate Governance
 
 
 
 <ul>
 <li>
 Design and implement a robust compliance framework aligned with:
 </li>
 <li>
 Omani laws and regulations
 </li>
 <li>
 International compliance standards
 </li>
 <li>
 Develop and enforce:
 </li>
 <li>
 Code of Conduct
 </li>
 <li>
 Anti-bribery and corruption policies (UK Bribery Act, FCPA)
 </li>
 <li>
 Sanctions compliance framework
 </li>
 <li>
 Establish internal controls and governance structures:
 </li>
 <li>
 Delegation of Authority (DoA)
 </li>
 <li>
 Board governance and reporting processes
 </li>
 <li>
 Oversee compliance audits and regulatory inspections
 
 
 </li>
 </ul>
 
 ESG, Energy &amp; Regulatory Advisory
 
 
 
 <ul>
 <li>
 Advise on evolving regulations related to:
 </li>
 <li>
 Green steel production
 </li>
 <li>
 Hydrogen and renewable energy
 </li>
 <li>
 Carbon regulations (including CBAM and carbon markets)
 </li>
 <li>
 Ensure compliance with:
 </li>
 <li>
 Environmental laws and emissions standards
 </li>
 <li>
 Sustainability reporting requirements
 </li>
 <li>
 Support certification and verification processes for green products
 
 
 </li>
 </ul>
 
 Operational Phase (Post-Commissioning)
 
 
 
 <ul>
 <li>
 Provide ongoing legal support for:
 </li>
 <li>
 Commercial contracts (sales, logistics, distribution)
 </li>
 <li>
 Procurement and supplier agreements
 </li>
 <li>
 Ensure compliance with:
 </li>
 <li>
 Labor and employment laws in Oman
 </li>
 <li>
 Ongoing regulatory obligations and filings
 </li>
 <li>
 Manage disputes, arbitration, and litigation
 </li>
 <li>
 Support continuous improvement of governance and compliance systems
 
 
 </li>
 </ul>
 
 Stakeholder Management
 
 
 
 <ul>
 <li>
 Act as the primary legal interface with:
 </li>
 <li>
 Government authorities and regulators in Oman
 </li>
 <li>
 External legal counsel (local and international)
 </li>
 <li>
 Joint venture partners, investors, and lenders
 </li>
 <li>
 Provide strategic legal advice to:
 </li>
 <li>
 Senior management
 </li>
 <li>
 Board of Directors
 </li>
 <li>
 Support the CEO in all relevant tasks where requested.
 
 
 </li>
 </ul>
 
 Requirements/ Skills/ Experience:
 
 
 
 <ul>
 <li>
 Omani nationals only
 </li>
 <li>
 Minimum 10&ndash;15 years of legal experience, preferably in:
 </li>
 <li>
 Energy, infrastructure, or industrial projects
 </li>
 <li>
 Project development and project finance
 </li>
 <li>
 Strong experience in:
 </li>
 <li>
 EPC / EPCM contracting
 </li>
 <li>
 Cross-border transactions
 </li>
 <li>
 Experience in the Middle East (GCC), particularly Oman, is highly desirable.
 
 
 </li>
 </ul>
 
 Required Education/ Qualification/ Training:
 
 
 
 <ul>
 <li>
 Bachelor&rsquo;s or Master&rsquo;s degree in Law (LLB / LLM)
 </li>
 <li>
 Qualified lawyer in a recognized jurisdiction (preferred)
 
 
 </li>
 </ul>
 
 Required Language Proficiency:
 
 
 
 English - Fluent
</div>

Legal & Compliance Manager

Global Business Solution and Business

Role OverviewThe HVAC Pipe Technician is responsible for installation, testing, commissioning, and maintenance of HVAC systems, including piping works and related electrical connections. The role requires strong technical expertise in DX systems and the ability to handle end-to-end HVAC installation and servicing.Key ResponsibilitiesInstallation &amp; Technical Work<ul><li>Install HVAC systems including Ducted AC, Cassette AC, Wall Split AC, AHU, ACCU, FAHU, and Exhaust Fans</li><li>Perform piping works including flaring, bending, welding, brazing, and soldering</li><li>Apply proper insulation, anti-vapor coating, cabling, and supports</li></ul>Testing &amp; Commissioning<ul><li>Conduct Nitrogen pressure testing, vacuum testing, and refrigerant gas charging</li><li>Carry out system commissioning and ensure proper functionality</li><li>Prepare basic service and commissioning reports</li></ul>Maintenance &amp; Troubleshooting<ul><li>Perform routine servicing and preventive maintenance</li><li>Diagnose and troubleshoot HVAC and basic electrical issues</li><li>Handle electrical wiring and connections (Control &amp; Power)</li></ul>Tools &amp; Teamwork<ul><li>Safely use electrical tools and equipment</li><li>Work collaboratively with team members to complete tasks efficiently</li></ul>Candidate Requirements<ul><li>Minimum 5 years of experience in HVAC piping and installation</li><li>Strong knowledge of DX type units</li><li>Experience in HVAC installation, testing, and maintenance</li><li>Basic knowledge of electrical wiring and troubleshooting</li><li>Ability to read and understand technical instructions</li></ul>Additional Advantages<ul><li>GCC experience preferred</li><li>Valid local authority driving license is an added advantage</li></ul>Work Location: In person

HVAC Pipe Technician

Green Umbrella Recruitment

<div><h3 class="jobSectionHeader">Job Information</h3>
<ul><div>Date Opened
<div>04/20/2026
</div></div><div>Job Type
<div>Full time
</div></div><div>Work Experience
<div>10 Plus
</div></div><div>Job Opening Status
<div>Open
</div></div><div>Industry
<div>Energy and Utilities
</div></div><div>City
<div>Muscat
</div></div><div>State/Province
<div>AI Wusta
</div></div><div>Country
<div>Sultanate of Oman
</div></div><div>Zip/Postal Code
<div>000</div></div></ul></div>
 <div><div>The Senior Electrical Engineer (MV/HV &amp; Primary Substation) will represent the Client on site for all medium- and high-voltage electrical systems, including the Primary Substation located within the same plot as the factory. The role is critical to ensuring safe installation, testing, energization, and commissioning readiness of MV/HV systems supplying the factory.</div><div></div><div><h2 class="jobSectionHeader"> 
Key Responsibilities 
</h2><h3 class="jobSectionHeader">
Client Representation &amp; Strategic Oversight 
</h3><ul><li>
Act as the Client&rsquo;s on-site electrical engineering and site management representative for MV, HV, and Primary Substation works. 
</li><li>
Provide technical leadership and client-side authority on all power supply, grid interface, and energization-related matters. 
</li><li>
Review and comment on MV/HV and substation designs, shop drawings, protection philosophies, method statements, and material submittals. 
</li><li>
Coordinate closely with the Controller / PMC company to align inspections, NCRs, and technical assessments.</li></ul><h3 class="jobSectionHeader"> 
MV / HV &amp; Primary Substation Systems Oversight 
</h3><ul><li>
Oversee and monitor execution of MV/HV systems, including: 
</li><li>
Primary substation (HV/MV GIS or AIS) 
</li><li>
Power transformers 
</li><li>
MV switchgear (11kV / 33kV or project-specific voltage levels) 
</li><li>
Protection relays and protection coordination 
</li><li>
SCADA and control systems (electrical scope) 
</li><li>
MV/HV cable systems, duct banks, and terminations 
</li><li>
Interface with utility / grid authority 
</li><li>
Ensure alignment between the Primary Substation Contractor and the factory electrical installation for seamless commissioning.</li></ul><h3 class="jobSectionHeader"> 
Testing, Energization &amp; Commissioning Readiness 
</h3><ul><li>
Witness and review testing and commissioning activities, including: 
</li><li>
Transformer testing. 
</li><li>
Protection relay testing and settings verification 
</li><li>
MV/HV cable testing 
</li><li>
Functional and interlock testing.</li></ul></div><div></div><h3 class="jobSectionHeader"> 
Requirements</h3><div>
Qualifications &amp; Experience
 
</div><div>Bachelor&rsquo;s degree in electrical engineering 
</div><div>
10+ years of experience in industrial or large-scale construction projects 
</div><div>
Experience working in a client-side or Consultant role 
</div><div>
Proven ability to review and oversee General Contractor electrical works 
</div><div>
Experience working alongside PMC / Controller companies 
</div><div>
Prior experience in Oman or GCC countries is an advantage</div></div>

Senior Electrical Engineer (HV/MV)

F.I.C

Qualifications &amp; Experience:<ul><li>Bachelor&rsquo;s degree in Engineering (Civil preferred or related discipline)</li><li>Minimum 12 years of relevant experience in construction/engineering projects</li><li>At least 8 years of experience in QA/QC management, specifically in real estate projects</li><li>Experience in Oman/GCC region is highly preferred</li></ul>Key Responsibilities:<ul><li>Develop, implement, and maintain the Project Quality Management System (QMS)</li><li>Ensure all construction activities comply with project specifications, standards, and codes</li><li>Review and approve Inspection and Test Plans (ITPs), method statements, and material submittals</li><li>Monitor site activities to ensure adherence to QA/QC procedures and quality standards</li><li>Coordinate with consultants, contractors, and subcontractors on quality-related matters</li><li>Conduct internal audits, inspections, and quality assessments</li><li>Manage non-conformance reports (NCRs) and ensure proper corrective and preventive actions</li><li>Oversee testing and commissioning activities to ensure compliance with requirements</li></ul>Technical Requirements:<ul><li>Strong knowledge of construction materials, testing standards, and quality control procedures</li><li>Familiarity with international standards (ISO 9001, ASTM, BS, etc.)</li><li>Experience with QA/QC documentation, reporting, and control systems</li><li>Understanding of local authority regulations and approvals in GCC/Oman</li></ul>Health, Safety &amp; Compliance:<ul><li>Ensure compliance with HSE policies and procedures in coordination with safety teams</li><li>Promote a quality-driven culture across all project teams</li></ul>Skills &amp; Competencies:<ul><li>Strong analytical and problem-solving skills</li><li>Excellent communication and reporting abilities</li><li>High attention to detail and commitment to quality standards</li><li>Ability to lead and manage QA/QC teams effectively</li></ul>Pay: RO800.000 - RO1,300.000 per monthWork Location: In person

Quality Control Manager

Explore 164+ Lead commissioning specialist in Muscat this May. Find roles across top companies and apply now to boost your career.