bms technician

Yas Global Partner LLC FZ

Key Responsibilities<ul><li>Assist in installation, testing, and commissioning of BMS systems</li><li>Monitor and maintain BMS controls for HVAC, lighting, and energy systems</li><li>Perform routine inspections and preventive maintenance</li><li>Troubleshoot basic system faults and escalate complex issues</li><li>Support senior engineers during system upgrades and modifications</li><li>Ensure all work complies with safety standards and regulations</li><li>Maintain logs, reports, and documentation of system performance</li><li>Coordinate with maintenance teams and contractors when required</li></ul>Requirements<ul><li>Diploma or ITI in Electrical / Electronics / Mechanical Engineering</li><li>1&ndash;2 years of experience in BMS or facility maintenance</li><li>Basic knowledge of HVAC systems and control systems</li><li>Familiarity with BMS platforms (e.g., Honeywell, Siemens, Schneider, Johnson Controls) is an advantage</li><li>Ability to read electrical drawings and schematics</li><li>Good troubleshooting and problem-solving skills</li><li>Basic computer skills (MS Office, system interfaces)</li><li>Willingness to work shifts if required</li></ul>Job Type: Full-timePay: AED2,000.00 - AED2,500.00 per monthWork Location: In person

BMS Technician

Champs And Stars Technical Services LLC

The BMS Technician is responsible for the installation, testing, commissioning support, of Building Management Systems including HVAC controls, monitoring devices, sensors, controllers, and associated field equipment.Key Responsibilities<ul><li>Install BMS field devices such as controllers, sensors, actuators, valves, dampers, and control panels</li><li>Perform cable pulling, termination, labelling, and testing as per drawings</li><li>Panel installation and field wiring verification</li><li>Support pre-commissioning and commissioning activities</li><li>Perform point-to-point testing and loop checking</li><li>Assist engineers during system integration and functional testing</li><li>Updates on redline markups</li><li>Maintain daily work reports.</li><li>Coordinate with engineers for snag clearance and handover documentation</li><li>Follow site HSE rules and company safety procedures</li><li>Use proper PPE and tools during all site activities</li><li>Ensure work complies with site specifications</li></ul>Technical Skills &amp; Knowledge<ul><li>Knowledge of HVAC control systems</li><li>Familiarity with BMS platforms (any of the following is an advantage):</li><li>o Siemens o Honeywell o Schneider o Johnson Controls</li><li>Understanding of control drawings, schematics, and wiring diagrams(mandatory)</li></ul>Qualifications<ul><li>ITI / Diploma in Electrical, Electronics, or Instrumentation</li><li>Minimum 2&ndash;5 years of experience in BMS works</li><li>Experience in UAE projects preferred</li></ul>Soft Skills<ul><li>Ability to work independently and as part of a team</li><li>Good communication and coordination skills</li><li>Willingness to work extended hours during commissioning phases</li></ul>Working Conditions<ul><li>Site-based role</li><li>May require night shifts or weekend work as per site requirement.</li></ul>Work Location: In person

BMS Technician (Building Management System)

syssense

Position Title: BMS Engineer Location: Abu Dhabi, UAE Experience Required: 3&ndash;5 Years Employment Type: Full-TimeJob SummaryWe are seeking a skilled and motivated BMS Engineer to join our team in Abu Dhabi. The ideal candidate should have 3 to 5 years of hands-on experience in Building Management Systems, with strong exposure to installation, testing, commissioning, troubleshooting, and maintenance of BMS systems.The candidate must be familiar with Honeywell, Alerton, and Schneider BMS systems and should have sound knowledge of HVAC controls, field devices, control panels, and system integration. The role requires technical competence, site coordination ability, and a proactive approach to delivering projects and support services efficiently.Key Responsibilities<ul><li>Install, test, commission, and maintain Building Management Systems (BMS) at site.</li><li>Carry out troubleshooting and fault diagnosis for BMS devices.</li><li>Monitor and optimize the performance of HVAC and other building automation systems through the BMS platform.</li><li>Configure and support BMS integration with third-party systems where applicable.</li><li>Attend preventive and corrective maintenance activities for BMS systems.</li><li>Review control drawings, wiring diagrams, shop drawings, and sequence of operations.</li><li>Coordinate with project managers, site teams, subcontractors, consultants, and clients for project execution and service activities.</li><li>Prepare technical reports, testing and commissioning reports, service reports, and documentation.</li><li>Ensure compliance with project specifications, quality standards, and safety requirements.</li><li>Support end-user training, system handover, and post-installation technical assistance.</li></ul>Required Qualifications<ul><li>Bachelor&rsquo;s Degree or Diploma in Electrical / Electronics / Instrumentation / Mechanical Engineering or related discipline.</li><li>3&ndash;5 years of relevant experience in Building Management Systems.</li><li>Familiarity with Honeywell, Alerton, and Schneider BMS systems is mandatory.</li><li>Good understanding of HVAC systems, control logic, sensors, actuators, and building automation principles.</li><li>Knowledge of communication protocols such as BACnet, Modbus, and other standard integration protocols.</li><li>Ability to read and interpret control schematics, technical drawings, and wiring diagrams.</li><li>Good troubleshooting, analytical, and problem-solving skills.</li><li>Strong communication and coordination skills.</li><li>Proficiency in MS Office and technical reporting.</li></ul>Preferred Skills<ul><li>Experience in testing and commissioning of BMS systems in commercial, residential, or industrial projects.</li><li>Knowledge of system graphics, controller programming, and BMS software tools.</li><li>Ability to work independently on site and manage multiple activities.</li><li>UAE driving license required</li></ul>Salary &amp; Benefits<ul><li>Salary will be commensurate with experience and qualifications.</li><li>Other benefits will be provided as per UAE company policy.</li></ul>Job Types: Full-time, PermanentWork Location: In person

BMS Engineer

German Experts Car Maintenance LLC - Dubai Branch

The EV Software Programmer is responsible for designing, developing, and maintaining software systems used in electric vehicles. This includes embedded systems, vehicle control logic, battery management, and communication between vehicle components. The role requires strong expertise in real-time systems, automotive standards, and hardware-software integration.Key Responsibilities<ul><li>Develop and maintain embedded software for EV systems (motor control, battery management, charging systems)</li><li>Design and implement software in C/C++ and/or Python for real-time automotive applications</li><li>Work with Electronic Control Units (ECUs) and vehicle communication protocols (CAN, LIN, Ethernet)</li><li>Implement and optimize Battery Management Systems (BMS) algorithms</li><li>Collaborate with hardware engineers to integrate software with sensors, controllers, and power electronics</li><li>Perform debugging, testing, and validation of embedded systems</li><li>Ensure compliance with automotive standards (e.g., ISO 26262 functional safety)</li><li>Participate in system architecture design and code reviews</li><li>Develop simulation models and testing frameworks</li><li>Document software design, testing procedures, and system performance.</li><li>Required Qualifications</li><li>Bachelor&rsquo;s or Master&rsquo;s degree in:</li><li>Computer Engineering</li><li>Electrical Engineering</li><li>Embedded Systems or related field</li><li>2&ndash;8+ years of experience in:</li><li>Embedded systems development</li><li>Automotive or EV-related software (preferred)</li><li>Technical Skills</li><li>Strong proficiency in C/C++ (mandatory)</li><li>Experience with real-time operating systems (RTOS)</li><li>Embedded systems programming and debugging</li></ul>Automotive / EV-Specific:<ul><li>CAN bus, LIN, or automotive Ethernet</li><li>ECU software development</li><li>Battery Management Systems (BMS) or motor control systems</li></ul>Pay: From AED8,000.00 per monthWork Location: In person

EV software programmer

Julphar

<div></div><div><div><div><div><div>Position Summary:

The HVAC Team Leader will lead a team of engineers and technicians responsible for the operation, maintenance, and continuous improvement of HVAC systems supporting sterile pharmaceutical manufacturing environments. This role is critical for ensuring environmental control, regulatory compliance, and system reliability across classified cleanrooms and aseptic processing areas.

Key Responsibilities:

Leadership &amp; Team Management
<ul>
<li>Supervise and coordinate the daily activities of the HVAC team, ensuring optimal system performance in aseptic and sterile zones.</li>
<li>Assign and prioritize tasks related to preventive, corrective, and predictive maintenance of HVAC systems.</li>
<li>Mentor, train, and evaluate HVAC technicians and junior engineers to uphold high technical and compliance standards.</li>
</ul>
Sterile Area HVAC Management
<ul>
<li>Ensure consistent environmental control in cleanrooms (Grade A/B/C/D), including temperature, humidity, differential pressure, airflow direction, and particle levels.</li>
<li>Oversee the performance of Air Handling Units (AHUs), terminal HEPA filters, LAF units, and pressure cascade systems.</li>
</ul>
GMP Compliance &amp; Regulatory Readiness
<ul>
<li>Ensure all HVAC activities meet cGMP, EU GMP Annex 1, FDA 21 CFR, and WHO requirements for sterile facilities.</li>
<li>Lead or support HVAC-related readiness and responses during internal and external audits (USFDA, EMA, MHRA, etc.).</li>
<li>Ensure HVAC systems are validated and remain in a qualified state through DQ, IQ, OQ, and PQ processes.</li>
</ul>
System Monitoring &amp; Problem Resolution
<ul>
<li>Monitor and analyze Building Management System (BMS) trends and Environmental Monitoring System (EMS) data to ensure continuous compliance.</li>
<li>Lead root cause analysis and implement corrective and preventive actions (CAPA) for any deviations or HVAC-related environmental excursions.</li>
</ul>
Project &amp; Engineering Support
<ul>
<li>Provide expert input in the design and installation of new HVAC systems in sterile areas.</li>
<li>Review technical drawings (P&amp;IDs, HVAC layouts), control logic, equipment specifications, and commissioning documents.</li>
<li>Coordinate HVAC activities during shutdowns, cleanroom refurbishments, or qualification campaigns.</li>
</ul>
SOPs &amp; Documentation
<ul>
<li>Develop, review, and enforce SOPs, work instructions, and maintenance plans for sterile HVAC systems.</li>
<li>Ensure timely and accurate documentation of maintenance, calibrations, deviations, and changes via GMP-compliant systems.</li>
</ul>
Qualifications and Experience:
<ul>
<li>Bachelor&rsquo;s degree in mechanical engineering, HVAC Engineering, or a related field.</li>
<li>Minimum 7+ years of progressive experience in pharmaceutical HVAC systems,</li>
<li>Expertise in managing cleanroom environments (Grade A to D) and HVAC systems designed for sterile operations.</li>
<li>Strong experience with terminal HEPA filtration, BMS integration, airflow visualization, and HVAC qualification protocols.</li>
</ul>
Key Competencies:
<ul>
<li>Deep understanding of GMP, EU GMP Annex 1, ISO 14644, and sterile manufacturing environmental controls.</li>
<li>Proven leadership skills, with the ability to manage cross-functional HVAC teams in high-pressure, regulated environments.</li>
<li>Strong troubleshooting and root cause analysis capability related to HVAC systems and environmental control.</li>
<li>Excellent communication, organizational, and decision-making skills.</li>
</ul>
Preferred Certifications &amp; Tools:
<ul>
<li>Certified in cleanroom/HVAC design, operation, or GMP compliance (e.g., PDA, ISPE, CIBSE).</li>
<li>Hands-on experience with Building Management Systems (BMS), Environmental Monitoring Systems (EMS), and HVAC balancing tools.</li>
<li>Familiarity with energy optimization and HVAC performance monitoring tools.</li></ul></div></div></div></div></div>

Team Leader - HVAC

Jones Engineering

<div>
 
 Job Title:
 
 Electrical Project Engineer &ndash; Intermediate Level
 
 
 
 Sector:
 
 Data Centre / Mission Critical Projects (preferred)
 
 
 
 Key Responsibilities:
 
 
 
 
 Design &amp; Coordination
 
 
 
 <ul>
 <li>
 Fully design the electrical systems from client inception to detailed design (MV, LV switchgear, cabling, containment, lighting, earthing, lightning protection, fire alarm, BMS, etc.).
 </li>
 <li>
 Ensure all electrical design drawings and specifications comply with local regulations (SEC/DEWA/ADMCC/ADDC, etc.), relevant standards (BS, IEC, NFPA), and client requirements.
 </li>
 <li>
 Provide technical input to the BIM team during preparation of coordinated drawings and singleline diagrams for all electrical systems.
 </li>
 <li>
 Perform detailed technical review of existing design drawings and calculations.
 </li>
 <li>
 Raise and follow up on Requests for Information (RFIs) for any client/consultant clarifications required.
 </li>
 <li>
 Liaise with the technical director and present designs and coordinate changes arising from site conditions or MEP interfaces.
 </li>
 <li>
 Ensures engineering calculations and drawings meet required robust industry and legal standards
 </li>
 <li>
 Leads on the coordination of engineering services
 </li>
 <li>
 Takes a holistic view in the selection and application of engineering concepts and solutions
 </li>
 <li>
 Provide Value Engineering solutions
 </li>
 <li>
 Liase with estimation teams during tender phases of projects.
 
 
 </li>
 </ul>
 
 Experience &amp; Qualifications:
 
 
 
 <ul>
 <li>
 Bachelor&rsquo;s degree in Electrical Engineering or equivalent from a recognized university.
 </li>
 <li>
 Minimum 5 years&rsquo; relevant experience on construction projects (Data Centre or mission-critical experience highly preferred).
 </li>
 <li>
 Strong technical knowledge of LV/MV systems, containment, lighting control, fire alarm, BMS/EPMS, and standby power systems.
 </li>
 <li>
 Proficient in Amtech/ETAP, Dialux, Microsoft Office, AutoCAD, Navisworks, and Revit.
 </li>
 <li>
 Familiar with Middle East regulations and authorities (SEC, DEWA, ADDC, Civil Defence, etc.) is a strong advantage.
 </li>
 <li>
 Excellent communication, coordination, and problem-solving skills.
 </li>
 <li>
 Ability to thrive in a demanding, collaborative environment.
 </li>
 </ul>
</div>

Electrical Project Engineer- 145226

Khazna Data Centers

<div>
 
 
 Khazna was founded in 2012 and has grown rapidly into becoming the leading and trusted wholesale Data Center provider in the Middle East and North Africa region. Through our Data Centers, we provide industry benchmark levels of power supply and cooling services to better serve the growing need for data center operations in the UAE and wider region.
 
 
 
 
 
 
 We are seeking a
 
 Site Energy Engineer
 
 to support the planning, implementation, and optimization of energy management initiatives across multiple data centers within the portfolio. Reporting to the
 
 Energy Manager
 
 , this role is responsible for monitoring energy consumption, conducting energy audits, driving efficiency improvement projects, and ensuring compliance with sustainability standards.
 
 
 
 
 
 The role combines hands-on technical expertise with data analysis and cross-functional collaboration to support the achievement of key sustainability metrics, including
 
 Power Usage Effectiveness (PUE)
 
 ,
 
 Water Usage Effectiveness (WUE)
 
 , and
 
 Carbon Usage Effectiveness (CUE)
 
 targets.
 
 
 
 
 
 
 Key Accountabilities:
 
 
 
 
 
 <ul>
 <li>
 Monitor real-time and historical energy, cooling, and water usage via BMS/CAFM systems.
 </li>
 <li>
 Analyse performance and consumption patterns to identify inefficiencies and propose corrective measures.
 </li>
 <li>
 Generate and maintain dashboards, reports, and KPIs for power, water, and scope 1 and 2 carbon emissions performance.
 </li>
 <li>
 Conduct site-level energy audits and lifecycle assessments to evaluate asset health and improvement potential.
 </li>
 <li>
 Support ISO 50001, LEED, and ASHRAE compliance by preparing documentation and responding to audit findings.
 </li>
 <li>
 Maintain accurate records of energy metrics, incident logs, and regulatory filings.
 </li>
 <li>
 Assist in the design and rollout of energy-saving retrofits (advanced cooling, renewable integration, AI analytics).
 </li>
 <li>
 Coordinate small-scale capital and operational projects: scoping, vendor engagement, scheduling, and handover.
 </li>
 <li>
 Validate project outcomes through post-implementation performance testing and ROI analysis.
 </li>
 <li>
 Collaborate with site operations, facilities, and IT teams to integrate energy-management requirements into daily workflows.
 </li>
 <li>
 Provide operational feedback to Design &amp; Construction for new builds and retrofits, ensuring efficient system selection.
 </li>
 <li>
 Troubleshoot BMS/CAFM data interfaces, ensuring seamless flow and data integrity across enterprise applications.
 </li>
 <li>
 Propose process enhancements and automation opportunities to reduce manual data collection and accelerate decision-making.
 </li>
 <li>
 Facilitate training sessions and workshops to raise energy-conservation awareness among site staff.
 </li>
 <li>
 Engage with external partners and industry bodies to stay informed on emerging best practices and technologies.
 </li>
 <li>
 The role will be part of a dynamic team within the CCC department, focusing on developing and implementing digital solutions to optimize operational efficiency and reliability of our assets.
 </li>
 <li>
 Fast-paced and dynamic environment with a focus on innovation, reliability, sustainability and continuous improvement to achieve world class standards.
 </li>
 <li>
 Collaborative atmosphere with opportunities for cross-functional teamwork.
 </li>
 <li>
 Occasional travel may be required within the UAE or International
 </li>
 </ul>
 
 
 
 
 
 Minimum Qualifications:
 
 
 
 
 
 <ul>
 <li>
 Bachelor&rsquo;s degree in mechanical, Electrical, Energy Engineering, or related discipline.
 </li>
 <li>
 3+ years of practical experience in data center, industrial, or commercial energy management.
 </li>
 <li>
 Familiarity with BMS/CAFM platforms, data-analytics tools, and energy modelling software.
 </li>
 <li>
 Working knowledge of ISO 50001, LEED, ASHRAE guidelines, and local energy regulations.
 </li>
 <li>
 Proven track record of supporting energy-efficiency projects and delivering measurable performance gains.
 </li>
 </ul>
 
 
 
 
 
 Training/Certifications Preferred:
 
 
 
 
 
 <ul>
 <li>
 Certified Energy Manager (CEM)
 </li>
 <li>
 ISO 50001 Energy Management Systems
 </li>
 <li>
 Certified Measurement &amp; Verification Professional (CMVP)
 </li>
 <li>
 LEED Green Associate
 </li>
 </ul>
 
 
</div>

Site Energy Engineer

Explore 98+ Bms technician in United Arab Emirates this May. Find roles across top companies and apply now to boost your career.