hvac technician

electrical technician

generator technician

technical manager

av technician

chinese car accessories installer automotive accessories technician

Al Dana Switchgear

Panel Assembler<ul><li>Assemble electrical control panels according to engineering drawings and wiring diagrams.</li><li>Install electrical components such as breakers, contactors, relays, terminals, switches, and PLC accessories.</li><li>Mount panel enclosures, DIN rails, cable ducts, and other hardware.</li><li>Perform wiring, cable termination, labeling, and routing.</li></ul>Busbar Technician<ul><li>Fabricate, cut, bend, drill, and install copper and aluminum busbars according to engineering drawings.</li><li>Measure and mark busbars accurately before fabrication.</li><li>Assemble busbar systems in LV/MV electrical panels and switchboards.</li><li>Install insulation, supports, and fastening components.</li><li>Perform busbar alignment and torque tightening as per specifications.</li></ul>ITI/Diploma in Electrical or Mechanical Trade.2&ndash;5 years of experience in busbar fabrication and installation.Work Location: In person

Panel Assemblers and Busbar Fitters

Prime Solutions & Services

We are seeking an experienced and safety-focused Lifting Supervisor to oversee and coordinate lifting operations across construction and project sites.The successful candidate will be responsible for planning, supervising, and controlling all lifting activities to ensure they are carried out safely, efficiently, and in compliance with approved lifting plans, project requirements, company procedures, and applicable Qatar safety regulations.Key Responsibilities<ul><li>Supervise all lifting operations involving cranes, forklifts, telehandlers, hoists, and other lifting equipment.</li><li>Review and implement approved lifting plans, risk assessments, and method statements before starting any lifting activity.</li><li>Conduct pre-lift meetings and toolbox talks with crane operators, riggers, signalmen, and site personnel.</li><li>Ensure lifting equipment, accessories, slings, shackles, hooks, spreader beams, and lifting gears have valid third-party inspection certificates.</li><li>Verify the suitability and capacity of lifting equipment for each lifting operation.</li><li>Inspect lifting areas, access routes, ground conditions, crane positions, and exclusion zones before work begins.</li><li>Confirm that crane operators, riggers, and signalmen hold valid competency certificates and site approvals.</li><li>Coordinate with project engineers, HSE teams, site supervisors, subcontractors, and equipment operators.</li><li>Ensure proper communication and signalling systems are maintained throughout lifting operations.</li><li>Stop any lifting activity that is unsafe, unplanned, or not compliant with the approved lifting plan.</li><li>Monitor weather conditions, visibility, wind speed, and site conditions before and during lifting activities.</li><li>Ensure loads are properly secured, balanced, rigged, and controlled during lifting and movement.</li><li>Maintain lifting inspection records, lifting permits, checklists, certificates, and daily activity reports.</li><li>Report lifting incidents, near misses, equipment defects, and unsafe conditions immediately.</li><li>Support the preparation of critical lifting plans in coordination with lifting engineers and project management.</li><li>Ensure compliance with company HSE requirements, client standards, and local authority regulations.</li><li>Promote a strong safety culture and ensure all personnel follow safe lifting practices.</li></ul>Requirements<ul><li>Diploma or technical qualification in Mechanical, Civil, Construction, or a related field.</li><li>Valid Lifting Supervisor certification from a recognized authority.</li><li>Minimum 5 years of experience supervising lifting operations in construction, infrastructure, industrial, or Oil &amp; Gas projects.</li><li>Previous experience in Qatar or the GCC is highly preferred.</li><li>Strong knowledge of crane operations, rigging methods, lifting accessories, load charts, and safe working loads.</li><li>Ability to read and understand lifting plans, method statements, risk assessments, crane load charts, and technical drawings.</li><li>Familiarity with routine, non-routine, and critical lifting operations.</li><li>Good knowledge of HSE procedures and lifting regulations.</li><li>Strong leadership, communication, and coordination skills.</li><li>Ability to work under pressure and respond quickly to unsafe conditions.</li><li>Good written and spoken English.</li><li>Immediate availability or a short notice period will be an advantage.</li></ul>Preferred Qualifications<ul><li>Third-party certified Lifting Supervisor.</li><li>Certified Rigger or Appointed Person qualification.</li><li>HSE, IOSH, NEBOSH, or equivalent safety certification.</li><li>Experience supervising mobile cranes, tower cranes, crawler cranes, and heavy lifting operations.</li><li>Valid Qatar ID and transferable visa.</li><li>Valid Qatar driving licence is an advantage.</li></ul>Key Competencies<ul><li>Safety awareness</li><li>Attention to detail</li><li>Leadership and supervision</li><li>Risk identification</li><li>Decision-making</li><li>Team coordination</li><li>Technical understanding</li><li>Documentation and reporting</li><li>Emergency response</li><li>Accountability</li></ul>How to ApplyInterested candidates may submit their updated CV along with copies of relevant lifting certifications and competency documents.Please mention &ldquo;Lifting Supervisor&rdquo; in the application subject to recruitment2025doha@gmail.com.Only shortlisted candidates will be contacted.Work Location: In person

Lifting Supervisor

ASMACS RECRUITMENT SERVICE WLL-QATAR

Job Title: HandymanLocation: QatarJob SummaryWe are looking for a skilled and reliable Handyman to perform general maintenance and minor repair works in commercial facilities. The ideal candidate should be proactive, capable of handling multiple maintenance tasks, and committed to ensuring the smooth operation of the premises.Key Responsibilities<ul><li>Carry out day-to-day maintenance tasks as assigned by the supervisor.</li><li>Perform minor repairs to doors, cabinets, locks, hinges, and fixtures.</li><li>Replace water taps, shower hoses, hand showers, water filters, and toilet accessories.</li><li>Repair wash basins and clear blocked drains.</li><li>Replace fused bulbs and perform minor touch-up painting.</li><li>Fix window blinds, clocks, signage, and wall-mounted frames.</li><li>Carry out minor tile repairs and grouting.</li><li>Inspect water levels, booster pumps, and water heaters.</li><li>Move and arrange furniture for office activities and events.</li><li>Set up event equipment, portable signage, and temporary structures.</li><li>Inspect facilities for unsafe conditions and address minor maintenance issues promptly.</li><li>Assist with other general maintenance duties as required.</li></ul>Requirements<ul><li>Minimum 2 years of experience in general maintenance or handyman work.</li><li>Basic knowledge of plumbing, carpentry, painting, and minor electrical repairs.</li><li>Good communication and problem-solving skills.</li><li>Ability to work independently and complete assigned tasks efficiently.</li><li>Physically fit and able to perform maintenance-related duties.</li></ul>Benefits<ul><li>Company-provided accommodation</li><li>Company-provided transportation</li><li>Company-provided food</li><li>Air ticket provided once every 2 years, as per company policy</li></ul>Pay: QAR1,000.00 per monthWork Location: In person

Handy Man

Al Emadi Stones

<div>
 
 
 Job Summary:
 
 
 
 The Technical Office Manager plays a critical role in bridging the gap between the client, design, fabrication and installation teams. Oversees the daily technical and administrative operations of our marble business, ensuring projects move smoothly from initial estimation, material selection, shop-drawings drafting to fabrication and final installation. Should combine strong office management skills with a deep understanding of natural stone production processes, CAD drawing, project management, along with very good communication skills to manage the stakeholders. (Client, Production, installation &amp; Admin)
 
 
 
 
 
 
 Key Responsibilities:
 
 
 
 
 Technical Leadership &amp; Coordination:
 
 
 <ul>
 <li>
 Manage the Drafting/Estimating Team: Oversee the team responsible for creating Shop Drawings, CAD designs, and technical specifications for marble cutting and CNC machining.
 </li>
 <li>
 Project Management: Track project timelines from initial field templating to final site installation, ensuring all departments stay on schedule.
 </li>
 <li>
 Quality Assurance: Review technical drawings and specifications against client requirements to ensure accuracy before slabs are sent to the fabrication floor.
 </li>
 <li>
 Technical Problem Solving: Act as the main point of contact for resolving technical discrepancies between architects, designers, installation teams, and the fabrication shop.
 </li>
 </ul>
 
 
 
 
 
 Inventory &amp; Supply Chain operations:
 
 
 <ul>
 <li>
 Material Management: Oversee the purchasing and inventory management of stone slabs &amp; blocks.
 </li>
 </ul>
 
 
 
 
 
 Office Management &amp; Administration:
 
 
 <ul>
 <li>
 Workflow Optimization: Develop and implement streamlined procedures for filing, project documentation, scheduling, and office workflows.
 </li>
 <li>
 Financial Support: Responsible of managing budgets, processing invoices, overseeing job costing, and handling customer billing.
 </li>
 <li>
 Team Supervision: Supervise administrative staff, manage office schedules, and assist HR with onboarding new employees
 </li>
 </ul>
 
 
 
 
 
 Tender &amp; Estimation:
 
 
 <ul>
 <li>
 Maintaining an updated tenders-Log with estimated submission date (Reasonable &amp; within time frame) along with communication of the same with sales team / client.
 </li>
 <li>
 Opening and briefing of Packages (RFQs)
 </li>
 <li>
 Responsibility of BOQ creation and accuracy to the scope. (If In-house)
 </li>
 <li>
 Price breakdown of each Item to set budgets for each activity. (Creation of project Brief with detailed budgeting for each assigned project)
 </li>
 <li>
 Selection of material that is suitable and can meet project needs. (If not specified)
 </li>
 <li>
 Cross-checking of material that is specified, suitability to the scope along with compliance to project spec`s with production &amp; Warehouse teams. (Proposal of suitable alternative material &amp; assumption of possible VEs)
 </li>
 <li>
 Maintain an updated material price list for the raw material in coordination with the procurement team.
 </li>
 <li>
 Pricing of related Vos, if any.
 </li>
 <li>
 Issuance of Price Quotations with the agreed general terms &amp; conditions. (Mentioning an approximate / estimated duration of completion)
 </li>
 <li>
 Prepare related weekly/monthly reports &amp; dash-boards to show progress.
 </li>
 <li>
 Coordination with all departments for actual updates to be reflected on cost in pricing new packages.
 </li>
 </ul>
 
 
 
 
 
 Engineering works:
 
 
 <ul>
 <li>
 Issuance and approval of [PQD, MARs, MS, Test Reports, Structure calculation reports, VOs, Notices, document submittals &hellip; etc.]
 </li>
 <li>
 Drafting &amp; approval of Work-shop &amp; as-built drawings sketches / proposals &amp; presentations.
 </li>
 <li>
 Issuance of cutting lists, Job-orders with all related detail sketches for production.
 </li>
 <li>
 Material selection (jointly with warehouse &amp; factory Manager)
 </li>
 <li>
 Issuance of required material requisitions.
 </li>
 <li>
 Issuance of notice of Vos.
 </li>
 <li>
 Technical coordination between site, factory &amp; accounting teams.
 </li>
 <li>
 Follow-up with 3rd partie`s (Out sourced resources):
 </li>
 <li>
 Test reports [ With QA/QC team]
 </li>
 <li>
 Structure calculations - Accessories suppliers [With Procurement team]
 </li>
 <li>
 Scheduling of awarded as well as pre-awarded projects in coordination with all related departments in tender stage.
 </li>
 <li>
 Development of unique design patterns for the re-use of wastage and existing stocks.
 </li>
 <li>
 Continuous development and renewal of show-room designs in coordination with sales and production teams.
 </li>
 </ul>
 
 
 
 
 
 QS Tasks:
 
 
 <ul>
 <li>
 Opening and briefing of Packages (RFQs)
 </li>
 <li>
 Responsibility of BOQ creation and accuracy to the scope. (If In-house)
 </li>
 <li>
 Detection and flagging to possibility of Vos &amp; Claims.
 </li>
 <li>
 Closure of Vos.
 </li>
 <li>
 Actual site survey and compliance to drawings.
 </li>
 <li>
 Issuance of IPCs to clients.
 </li>
 <li>
 Issuance of IPCs. Of sub-contractors.
 </li>
 </ul>
 
 
 
 
 
 KPIs:
 
 
 <ul>
 <li>
 Reduction of the lead-time for every package than the planned release date.
 </li>
 <li>
 Accuracy of pricing VS market prices.
 </li>
 <li>
 Qty of awarded packages VS released &amp; received
 </li>
 <li>
 Actual cost of each item VS budget.
 </li>
 <li>
 Accuracy of item description in BOQ creation to the actual
 </li>
 <li>
 Accuracy of actual take-off VS actual Qtys.
 </li>
 <li>
 Speed of Invoice submission and closure (getting approval) VS planned time frame.
 </li>
 <li>
 Speed of getting approvals on all technical submittals (on Revision basis)
 </li>
 <li>
 Accuracy and efficiency of drawings and details with the site conditions.
 </li>
 <li>
 Smooth technical coordination between Factory and site.
 </li>
 <li>
 Speed of orders processing and release from contract signature.
 </li>
 <li>
 Accuracy of As-built drawings to actual site conditions.
 </li>
 <li>
 Customer feedback on response to modifications, change &amp; Variation orders.
 </li>
 </ul>
</div>

Technical Manager

Asia Technical Trade Services

A leading Chinese Mechanical Construction company is hiring a Senior Accountant for their operations in Qatar as per the following requirements.Position: Senior Accountant<ul><li>Work experience: Min 6 years in GCC</li><li>Driving License: Must have Qatar Driving License</li><li>Arabic Language: Arabic speaking will be an added advantage</li><li>NOC: NOC is required to change sponsorship</li><li>Joining: Immediate joiners with QID are preferred</li><li>Required Key Skills: Project Accounting, Payroll Process, AR. AP, month end closing.</li><li>Qualification: Graduate in accounting</li></ul>Salary &amp; Benefits: <ul><li>Salary: QR. 3500 to QR. 4500 as per experience and accounting skills</li><li>Food &amp; Accommodation: Provided by the company</li><li>Duty: 8 Hours</li><li>Vacation &amp; Ticket: On completion of 24 months of services</li><li>Medical: Provided by the company</li></ul>Interested applicants meeting the above requirements and ready to work in the given salary and benefits, please email us your updated resume with copies of your work experience certificates.Pay: QAR3,500.00 - QAR4,500.00 per monthWork Location: In person

Urgently Required - Senior Accountant

Hot n cool

Job SummaryResponsible for maintaining, repairing, and troubleshooting all kitchen equipment, ensuring that it operates efficiently and safely. Will perform routine inspections, preventive maintenance, and respond to emergency repair requests. Also involves coordinating with the kitchen staff to ensure minimal disruption to kitchen.Key Responsibilities1. Inspect and diagnose issues with kitchen equipment (Hot and cool Restaurant), including ovens, fryers, grills, dishwashers, refrigerators, and other related appliances.2. Perform preventive maintenance on kitchen equipment to ensure optimal performance and longevity.3. Repair or replace faulty components, such as motors, thermostats, heating elements, and electrical wiring.4. Maintain an inventory of spare parts and order replacements as needed.5. Collaborate with kitchen staff to schedule maintenance during non-peak hours to minimize operational disruption.6. Ensure all kitchen equipment complies with health and safety regulations.7. Keep accurate records of maintenance activities, repairs, and parts used.8. Provide technical support and training to kitchen staff on proper use and care of equipment.9. Respond promptly to emergency repair requests and work efficiently to resolve issues.10. Coordinate with external vendors for specialized repairs or warranty services.11. Maintain a clean and organized workspace and ensure that all tools are properly maintained.12. Performs other duties assigned.Qualification, Experience &amp; Knowledge<ul><li>High school diploma or equivalent; a technical degree or certification in equipment maintenance or a related field is preferred.</li><li>Minimum of 3 to 5 years of experience in maintaining and repairing kitchen equipment.</li><li>Strong knowledge of kitchen equipment and appliances, including their operation, maintenance, and repair.</li><li>Proficient in reading and interpreting technical manuals, schematics, and wiring diagrams.</li><li>Basic knowledge of electrical, plumbing, and HVAC systems as they relate to kitchen equipment.</li><li>Ability to work independently and troubleshoot issues effectively.</li><li>Good communication skills and ability to work well with a team.</li><li>Physical ability to lift heavy equipment and work in confined spaces.</li><li>Availability for on-call duty and emergency repairs outside of regular working hours.</li><li>Availability to respond to maintenance emergencies outside regular working hours.</li></ul>Job Type: Full-timeApplication Question(s):<ul><li>What is your Nationality?</li><li>You can join Immediately?</li><li>How many experience do you have as a Kitchen Equipment Technician?</li><li>Expected salary?</li><li>Do you have a Car?</li></ul>Work Location: In person

KITCHEN EQUIPMENT TECHNICIAN

MSSH

Product SpecialistLocation: Qatar Department: Automotive / Garage Equipment Division Employment Type: Full-TimeJob SummaryWe are seeking a highly motivated Product Specialist to manage assigned product lines and act as the key link between suppliers, supply chain, and sales teams. The successful candidate will ensure product availability, provide technical and commercial support, maintain accurate product information, and contribute to business growth through effective product management and market analysis.Key Responsibilities<ul><li>Manage assigned product portfolios and support product lifecycle activities.</li><li>Coordinate with suppliers, sales teams, and supply chain departments to ensure smooth operations.</li><li>Monitor inventory levels and ensure timely replenishment to avoid stock shortages or excess stock.</li><li>Provide technical product information, specifications, and commercial support to the sales team.</li><li>Prepare and support quotations, pricing updates, and product recommendations.</li><li>Identify new products, market opportunities, and portfolio expansion opportunities.</li><li>Maintain accurate product data, catalogs, pricing, and documentation within company systems.</li><li>Support product launches, promotions, and marketing initiatives.</li><li>Monitor market trends, competitor activities, and customer requirements.</li><li>Resolve product-related issues and coordinate with suppliers on quality or supply concerns.</li><li>Respond promptly to product inquiries from internal and external stakeholders.</li></ul>RequirementsEducation<ul><li>Bachelor's Degree in Mechanical Engineering, Automotive Engineering, or a related field preferred.</li><li>Candidates with a relevant technical diploma and strong industry experience will also be considered.</li></ul>Experience<ul><li>3&ndash;5 years of experience in Product Management, Technical Sales, Procurement, Supplier Coordination, or a related role.</li><li>Experience within the automotive aftermarket, garage equipment, industrial tools, or industrial equipment sectors is highly preferred.</li></ul>Required Skills &amp; Competencies<ul><li>Strong knowledge of automotive products, garage equipment, or industrial tools.</li><li>Understanding of inventory management, supply chain, and procurement processes.</li><li>Excellent communication and coordination skills.</li><li>Strong analytical and problem-solving abilities.</li><li>Advanced proficiency in Microsoft Excel and ERP systems.</li><li>Technical and commercial product knowledge.</li><li>Supplier management and negotiation skills.</li><li>Ability to manage multiple priorities and meet deadlines.</li><li>Customer-focused mindset with strong attention to detail.</li></ul>Experience: 3&ndash;5 years (Required) Industry: Automotive, Garage Equipment, Industrial Tools, or Industrial Equipment Language: English (Required), Arabic is an advantage.Pay: QAR5,500.00 - QAR6,500.00 per monthWork Location: In person

Product Specialist

Explore 30+ Chinese car accessories installer automotive accessories technician in Qatar this August. Find roles across top companies and apply now to boost your career.