electrical engineer

aircraft mechanic iii powerplant/engine mh-60 jubail Jobs in Al Khobar

airport design manager

airport structural design engineer Jobs in Al Khobar

airport structural design engineer

associate engineer ( electrical ) - smp with saudi aramco Jobs in Al Khobar

electrical engineer aviation

Projects Pioneers Contracting Company

<p>Electrical Site Engineer &ndash; Job DescriptionJob Title</p><p><b>Electrical Site Engineer</b></p><p>Job Summary</p><p>An Electrical Site Engineer is responsible for supervising, installing, testing, and maintaining electrical systems at construction or industrial project sites. They ensure electrical work is completed safely, on schedule, within budget, and according to technical drawings, codes, and project specifications.</p><p>Key Responsibilities</p><ul><li>Supervise electrical installation works at project sites</li><li>Review electrical drawings, layouts, and technical specifications</li><li>Coordinate with contractors, consultants, and project managers</li><li>Monitor daily site activities and ensure work progress</li><li>Ensure compliance with electrical standards and safety regulations</li><li>Conduct inspections, testing, and commissioning of electrical systems</li><li>Prepare material requests and monitor inventory usage</li><li>Troubleshoot electrical issues and provide technical solutions</li><li>Maintain project documentation, reports, and site records</li><li>Ensure quality control and timely project completion</li></ul><p>Common Systems Handled</p><ul><li>Power distribution systems</li><li>Lighting systems</li><li>Cable tray and conduit installations</li><li>Transformers and switchgear</li><li>Earthing and lightning protection systems</li><li>Fire alarm systems</li><li>CCTV and security systems</li><li>HVAC electrical connections</li><li>Generators and UPS systems</li></ul><p>Required Skills</p><ul><li>Knowledge of electrical engineering principles</li><li>Ability to read electrical drawings and schematics</li><li>Familiarity with electrical codes and safety standards</li><li>Project coordination and supervision skills</li><li>Problem-solving and troubleshooting ability</li><li>Good communication and teamwork</li><li>Time management and reporting skills</li></ul><p>Educational Requirements</p><ul><li>Bachelor&rsquo;s Degree or Diploma in Electrical Engineering</li><li>Relevant certifications may be preferred</li></ul><p>Experience Requirements</p><ul><li>1&ndash;3 years for junior roles</li><li>3&ndash;7+ years for senior site engineer positions</li><li>Construction, industrial, or infrastructure project experience preferred</li></ul><p>Pay: ﷼7,000.00 - ﷼8,000.00 per hour</p><p>Work Location: In person</p>

Electrical Site Engineer

advance step contracting

<p><b>site Civil Engineer &ndash; Saudi Electricity Project</b></p><p>We are seeking a qualified and experienced <b>Site Civil Engineer</b> to supervise and coordinate civil construction activities for Saudi electricity infrastructure projects. The candidate will be responsible for ensuring that all civil works are executed safely, on schedule, within budget, and in compliance with project specifications, quality standards, and client requirements.</p><p>Key Responsibilities</p><ul><li>Supervise day-to-day civil construction activities at project sites.</li><li>Execute civil works related to substations, power plants, transmission lines, underground cable networks, and utility infrastructure.</li><li>Review drawings, specifications, and technical documents before execution.</li><li>Monitor site progress and ensure adherence to project schedules.</li><li>Coordinate with project managers, electrical engineers, consultants, subcontractors, and client representatives.</li><li>Ensure compliance with project quality requirements and approved construction methods.</li><li>Conduct site inspections and prepare daily, weekly, and monthly progress reports.</li><li>Manage site resources including labor, equipment, and materials.</li><li>Resolve technical issues and provide engineering solutions during construction.</li><li>Ensure compliance with Saudi regulations, safety standards, and environmental requirements.</li><li>Participate in testing, commissioning, and project handover activities.</li><li>Verify quantities and assist with measurement and billing activities.</li></ul><p>Requirements</p><ul><li>Bachelor's Degree in Civil Engineering.</li><li>Minimum <b>3&ndash;7 years</b> of experience in power, utility, substation, transmission, or infrastructure projects.</li><li>Experience in Saudi Arabia or GCC countries preferred.</li><li>Knowledge of civil construction for electrical substations, cable trenches, foundations, roads, drainage systems, and utility structures.</li><li>Ability to read and interpret engineering drawings and specifications.</li><li>Proficiency in Microsoft Office and AutoCAD.</li><li>Strong communication and coordination skills.</li><li>Valid driving license preferred.</li></ul><p>Preferred Qualifications</p><ul><li>Experience working on projects for <b>Saudi Electricity Company (SEC)</b> or similar utility companies.</li><li>Knowledge of SEC standards and construction requirements.</li><li>Familiarity with project management and quality control procedures.</li></ul><p>Pay: From ﷼3,500.00 per month</p><p>Work Location: In person</p>

civil site engineer

ENGIE

<div></div><div><div><div><div><div><div><div><div><div><div><b>JOB PURPOSE:</b></div></div></div><p></p><div><div><br>
<p>
The Electrical Engineer will be accountable to supervise a team of maintenance foremen/technicians and support staff to fulfil the day-to-day electrical maintenance activities at the power and desalination plant. In addition to supporting the management of the major outages of the plant through the provision of a gas turbine long-term service agreement, ensuring that the plant meets Safety, Environmental, availability, reliability, efficiency, and budgetary targets.</p></div></div><p></p><div><br>
<div>
<div><b>KEY ACCOUNTABILITIES:<br>
</b></div></div></div><br>
<div><div><div><b>Description</b></div></div><div><br>
<div><b>
Performance Indicators</b></div></div></div><div><br>
<div>
<p><b>Safety at Work</b></p>
<ul>
<li>Ensures the compliance of IMS. Ensures a safe working environment for himself, his colleagues and contractors while working on any equipment</li>
<li>Obtains a Permit to Work for each job as necessitated by the safety and associated Procedures</li>
<li>Ensures all Method Statements Work Instruction and Procedures are followed by himself and Contractors while undertaking any work</li>
<li>Ensure that all appropriate tools are available to ensure work can be carried out safely on equipment</li>
<li>Supervises Electrical Technicians and Contractors to ensure Safety Rules and HSE procedures are followed</li>
<li>Reports any unsafe conditions/unsafe acts in accordance with procedure</li>
<li>Shall possess valid driving license or attain driving license before end of the probation period</li></ul></div><p></p><div><br>
<p>
Continuous on-the-job application of safety rules and HSE procedure</p><br>
<p></p>
<p>
Frequency of Safety Incidents and near misses.</p><br>
<p>
</p><p>Lost Time Injury Frequency Rate (LTIFR).</p><br>
<p></p>
<p>
No HSE compliance breaches.</p><br>
<p></p>
<p>
Audit Outcomes</p></div></div><p></p><div><br>
<div>
<p><b>Maintenance Task Planning and Execution</b></p>
<ul>
<li>Plan, execute, and oversee preventive, predictive, and corrective maintenance in addition to Project Execution and upgrades for electrical systems and equipment.</li>
<li>Ensures maintenance tasks are completed by the Technicians as per Work Orders generated in CMMS</li>
<li>Ensures work done notes on maintenance carried out is documented in CMMS</li>
<li>Produce reports as necessary on any maintenance activity</li>
<li>Plans for and ensure that maintenance of all electrical equipment is in accordance with OEM manuals and best practices for the equipment</li>
<li>Along with the Section Head Electrical, ensures electrical maintenance planning is correctly scheduled so that all equipment is maintained as per recommended intervals</li>
<li>Reviews Electrical Maintenance Procedures/practices and suggests where they can be improved</li>
<li>Ensure all time readiness for any kind of audit</li>
<li>Review and analyze maintenance reports, test results, and recommend improvements.</li></ul></div><p></p><div><br>
<p>
Closed out Work Orders; Achieve Maintenance KPIs</p>
<p>
Efficiency at work.</p>
<p>
Quality of Work.</p>
<p>
Quality of reports.</p>
<p>
No NCRs/No observations in any kind of audit as per set maintenance practices<br>
</p></div></div><br>
<div><div><p><b>Equipment Failure Trouble Shooting and Repair</b></p>
<ul>
<li>Supports the 24-hour operation by being regularly available for call-out at short notice</li>
<li>Attempts at all possible means of reducing equipment downtime and ensuring high plant availability</li>
<li>Performs trouble shooting activities as necessary to determine failure conditions and rectifies defects found</li>
<li>Records and reports to the Section Head-Electrical all rectification jobs undertaken</li>
<li>Generate reports of equipment failures</li>
<li>Performs Root Cause Analysis of Failures/Potential Failures</li>
<li>Works with Plant Operations Personnel for resolving problems encountered with electrical equipment.</li></ul></div><p></p><div><br>
<p>
Efficiency troubleshooting</p>
<p>
RCA and follow-up action</p>
<p>
Completion of Incident Reports with implementation on action plan</p></div></div><div></div><div><br>
<div>
<p><b>Reporting and Planning and Budgeting</b></p>
<ul>
<li>Discusses planned and unplanned jobs undertaken with the Section Head-Electrical
</li><li>Works with the Section Head-Electrical for outage planning and execution</li>
<li>Assists the Section Head-Electrical in planning and budget preparation processes.</li></ul></div><p></p><div><br>
<p>
Accuracy of outage planning</p>
<p>
Accuracy of forecast budget</p></div></div><div></div><div><br>
<div>
<p><b>Spares, Consumables and Use of Tools and Equipment</b></p>
<ul>
<li>Ensures adequate inventories of spares and consumables are maintained</li>
<li>Places requisitions for purchase of required spares and consumables</li>
<li>Ensures necessary tools and equipment is available to all Technicians</li>
<li>Ensures appropriate certification of all tools is done on a routine basis</li>
<li>Ensures all tools and equipment are appropriately maintained and are in good working condition</li></ul></div><p></p><div><br>
<p>
Downtime due to unavailability of necessary spares and consumables</p>
<p>
Condition and quantity of available tool and equipment</p><div></div><div><br>
</div></div></div><br>
<div><div><p><b>Provision of technical advice:
</b></p><ul><li>Delivers technical advice to colleagues and Contractors to ensure safety and the proper execution of Plant Maintenance Practices</li>
<li>Applies engineering knowledge and skills to review and update task lists for equipment.
</li><li>Implement initiatives to address inconsistencies in CMMS scheduling, practices and documentation.</li></ul></div><p></p><div><br>
<div>
Quality and accuracy of documentation</div></div></div><div><br>
<div>
<p><b>Staff Development:</b></p>
<ul>
<li>Coaches electrical Technicians on a range of electrical equipment, Safe Work Procedures and Operational Techniques to ensure proper execution of Plant Routines</li>
<li>Support development of Saudi Nationals through technical training and mentorship</li>
<li>Prepares and delivers Technical Training on a range of subject matter.</li></ul></div><p></p><div><br>
<p>
Skill of Technicians and quality of work</p>
<div>
Staff feedback</div>
<div>
Development and growth of Saudi Nationals</div></div></div><div><br>
<div>
<div><b>CORE COMPETENCIES:</b></div><br>
</div>
</div><br>
<div></div><div><div><div><b>Technical</b></div><br>
<div><b>
</b></div><ul><li>Lead a team of electrical technicians/foremen and support staff to fulfill the day-to-day electrical maintenance activities at the power and desalination plant.</li>
<li>Practical knowledge of major electrical component maintenance associated with GT, ST HRSG in combined cycle configuration and desalination processes.</li>
<li>Good electrical engineering foundation and practical knowledge of modern power plant and desalination plant technologies</li>
<li>Strong understanding of Health, Safety and Environment management systems, Quality assurance and Safety rules.</li>
<li>Ability to recognize safety issues and hazards to personnel, and to act on own initiative in preventing incidents</li>
<li>Assists to manage all electrical maintenance activities associated with defect and planned maintenance programs, through a team of site based engineers, technicians with support from contract staff.
</li><li>Assists in development of the short- and long-term electrical maintenance strategy for the plant and equipment the development of the electrical maintenance team to support that strategy.
</li><li>Day-to-day management of electrical maintenance activities in accordance with OEM manuals, best practices, company procedures and any legal/contractual requirements</li>
<li>Ensure that the plant meets Safety, Environmental, availability, reliability, efficiency, budgetary targets whilst complying with legal and contractual requirements.
</li><li>Assists to establish the appropriate procedures and computerized electrical maintenance management processes as applicable to prudent engineering standards.</li>
<li>Organizing spares, tools and equipment to carry out electrical maintenance activities</li>
<li>Performs trouble shooting activities as necessary to identify failure conditions and rectifies defects found.</li>
<li>Ensures maintenance tasks are completed by the Technicians in accordance to Work Orders generated in CMMS.</li>
<li>Discusses with the Section Head-Electrical planned and unplanned jobs undertaken.
</li><li>Supports the Section Head-Electrical for outage planning and execution</li>
<li>Assists the Section Head-Electrical in planning and budget preparation processes.</li>
<li>Ensures work done notes on maintenance carried out is documented in CMMS</li>
<li>Ensures adequate inventories of spares and consumables are maintained by close coordination with procurement team</li>
<li>Places requisitions for purchase of required spares, tools and consumables</li>
<li>Drive motivation and leadership of colleagues and subordinates</li>
<li>Acts as a mentor and recommends the appropriate training for the electrical Technicians/foremen</li>
<li>Knowledge of international health &amp; safety working practices</li>
<li>Computer literacy</li>
<li>Good command of written and spoken English. Perform inspections and quality checks at contractor&rsquo;s premises</li>
</ul>
<p><b>Behavioral</b></p>
<ul>
<li>Provide effective support to the maintenance team which contributes to the plant objectives</li>
<li>Leading groups to progress projects and other initiatives
</li><li>Making quality decisions and exercise sound judgment</li>
<li>The ability to liaise with vendors and contractors</li>
<li>Delegates effectively and creates a work climate where people can succeed and empowers subordinates.</li>
<li>Good understanding of cultural differences that exist.</li>
<li>Ability to create a climate of open communication.</li>
<li>Ability to maintain high levels of focus and drive by setting personally challenging goals.</li>
</ul>
<div><b>Commitment to ENGIE&rsquo;s &ldquo;Ways of Working&rdquo; and &ldquo;Ways of Leading.&rdquo;</b></div></div></div><div><br>
<div>
<div><b>COMMUNICATION AND WORKING RELATIONSHIPS:</b></div></div></div><div><br>
<div>
<p><b>Internal:</b></p>
<ul>
<li>Daily communications regarding plant maintenance and people issues with Section Head-Electrical</li>
<li>Daily co-ordination and cooperation with the Operations and Maintenance teams and external parties for routine and emergency activities</li>
<li>Regular communications with the maintenance team regarding maintenance strategy, technical problems, issues and individual&rsquo;s development needs.
</li></ul><p><b>External:</b></p>
Communicating with suppliers and services contractors<br>
<ul><li>
</li></ul></div></div><br>
<div><div><div><b>FRAMEWORKS, BOUNDARIES, &amp; DECISION MAKING AUTHORITY:<br>
</b></div></div></div><br>
<div><div><ul><li>The jobholder operates under the general guidance of the Section Head-Electrical on all routine issues related to plant operations and team management</li>
<li>The jobholder is free to plan and manage own areas of activity within policy/procedural boundary limits
</li></ul><ul><li>Any extraordinary issues arising outside of set policies and procedures are referred to the Maintenance Manager/ Section Head-Electrical for discussion and approval of recommended actions.</li></ul></div><br>
</div><br>
<div><div><div><b>Physical Health &amp; Capacity Requirements</b></div></div></div><div></div><div><div><br>
<div>
The Electrical Engineer role involves working in environments that demand strong physical and mental resilience. The candidate must:</div>
<ul>
<li>Be medically fit to work in power plant conditions, including exposure to high voltage, heat, noise, and confined spaces.</li>
<li>Possess sufficient strength and stamina to stand, walk, and climb for extended periods during inspections and supervision.</li>
<li>Have the ability to work at heights and in elevated areas, including scaffolds and overhead cranes.</li>
<li>Maintain good vision (with corrective lenses if required) and hearing to safely monitor electrical systems and alarms.</li>
<li>Exhibit strong hand-eye coordination and dexterity for handling electrical components</li>
<li>Be able to respond promptly and physically in emergency or fault conditions, including rapid movement to safe locations.</li>
<li>Tolerate rotating shifts, extended working hours, emergency callouts physically demanding schedules as per plant operational needs.</li>
<li>Be free from medical conditions that may impair alertness, balance, or safe performance of electrical supervision duties.</li></ul></div></div><br>
<div></div>
</div>
</div></div></div></div></div><p></p><div><div><div><div>Business Unit: GBU Renewables &amp; Flexible Power
</div></div></div></div><div><div><div><div>Division: GEN International - KSA
</div></div></div></div><div><div><div><div>Legal Entity: JUBAIL O&amp;M COMPANY LIMITED
</div></div></div></div><div><div><div><div>Professional Experience: Skilled ( &gt;3 experience &lt;15 years)
</div></div></div></div><div><div><div><div>Education Level: Bachelor's Degree
</div></div></div></div><div><div><div><div>Company Name: ENGIE Saudi Arabia
</div></div></div></div><div><div><div><h3 class="jobSectionHeader"><b>Why this matters to us</b></h3>
<p>Our organisation is an equal opportunity employer and is committed to fostering a diverse and inclusive workplace. We offer reasonable accommodations upon request for individuals with disabilities.</p></div></div></div></div>

Electrical Engineer

<div></div><div><div><div><div><div><div><p>Position Summary:</p>
</div>
<p>The role requires to perform preventive, predictive, and corrective maintenance, troubleshooting, and testing of all electrical equipment and systems in the Combined Cycle Power Plant (CCPP) and Desalination Plant. The role ensures safe, reliable, and efficient operation of electrical assets, supporting uninterrupted power and water production. The Job Holder will work closely with other Electrical Technicians to ensure Plant Routines are carried out efficiently and to high quality standards;</p>
<p><b>
Technical
</b></p><ul><li>Responsible to ensure compliance of IMS.</li>
<li>Practical experience of maintaining Electrical equipment gained through hands on experience and formal training.
</li><li>Organizing spares, tools and equipment to carry out maintenance activities</li>
<li>Carry out preventive and corrective maintenance activities on a range of major Electrical systems in accordance with OEM Manuals and industrial best practices for the equipment.</li>
<li>Performs troubleshooting activities independently as necessary to determine failure conditions and rectifies the defects found.</li>
<li>Works with Plant Operations Personnel for resolving problems encountered with control equipment under the guidance/instructions of the ELECTRICAL Foreman/Engineer.</li>
<li>Ability to carry out duties with minimum supervision</li>
<li>Practical knowledge of plant isolations from system hazards</li>
<li>Sufficient Knowledge of health &amp; safety and safe working practices
</li><li>Support department for improvement in safety culture</li>
<li>Ensures a safe working environment for himself and his colleagues while working on any equipment</li>
<li>Computer literacy including SAP and MS Office</li>
<li>Good command of English Language</li>
<li>Supports the 24-hour operation by being available for call-out at short notice as needed</li>
<li>Records and reports to the Foreman all PM/CM jobs undertaken</li>
<li>Follow and respect company rules and procedures</li>
<li>Achieve all necessary permit authorizations with respect to Electrical Systems</li>
<li>Shall possess valid Saudi driving license</li>
<li>Participate in safety meetings, toolbox talks, and incident investigations.</li>
<li>Update CMMS (Computerized Maintenance Management System) after every activity</li>
<li>Participate in technical training and continuous development programs.</li>
<li>It is preferred that employe to reside in the city of Jubail for quick reach to plant in case of emergency</li></ul><br>
<p></p>
<p><b>
Physical Health &amp; Capacity Requirements</b></p>
<p>
The Electrical Technician role involves working in environments that demand strong physical and mental resilience. The candidate must:</p>
<ul>
<li>Be medically fit to work in power plant conditions, including exposure to high voltage, heat, noise, and confined spaces.</li>
<li>Possess sufficient strength and stamina to stand, walk, and climb for extended periods during inspections and supervision.</li>
<li>Have the ability to work at heights and in elevated areas, including scaffolds and overhead cranes.</li>
<li>Be capable of lifting and handling electrical tools and equipment weighing up to 20&ndash;25 kg.</li>
<li>Maintain good vision (with corrective lenses if required) and hearing to safely monitor electrical systems and alarms.</li>
<li>Exhibit strong hand-eye coordination and dexterity for handling electrical components</li>
<li>Be able to respond promptly and physically in emergency or fault conditions, including rapid movement to safe locations.</li>
<li>Tolerate rotating shifts, extended working hours, emergency callouts physically demanding schedules as per plant operational needs.</li>
<li>Be free from medical conditions that may impair alertness, balance, or safe performance of electrical supervision duties.</li>
</ul></div></div></div></div><div></div><div><div><div><div>Business Unit: GBU Renewables &amp; Flexible Power
</div></div></div></div><div><div><div><div>Division: GEN International - KSA
</div></div></div></div><div><div><div><div>Legal Entity: JUBAIL O&amp;M COMPANY LIMITED
</div></div></div></div><div><div><div><div>Professional Experience: Skilled ( &gt;3 experience &lt;15 years)
</div></div></div></div><div><div><div><div>Education Level: Technical College Diploma
</div></div></div></div><div><div><div><div>Company Name: ENGIE Saudi Arabia
</div></div></div></div><div><div><div><h3 class="jobSectionHeader"><b>Why this matters to us</b></h3>
<p>Our organisation is an equal opportunity employer and is committed to fostering a diverse and inclusive workplace. We offer reasonable accommodations upon request for individuals with disabilities.</p></div></div></div></div>

Electrical Technician

Schweitzer Engineering Laboratories

<div><p>Schweitzer Engineering Laboratories provides complete power system protection, control, monitoring, automation, security and integration for utilities and industries worldwide. We are looking for Project Engineer &ndash; Project Manager to provide technical support to customers. A successful candidate must have knowledge and experience of power system with full life-cycle project management of multiple large multi-discipline projects from proposal conception to commissioning and close-out, effectively track and stabilize projects, implement solutions for obstacles and anticipate customer needs, and related SEL products to complete complex assignments.</p><p><br>
This is your chance to build your career with a global leader and innovator in the power protection industry.</p><p><b><br>
As a Project Engineer &ndash; Project Manager, a typical day might include the following:</b></p><ul><li><p>
Possesses, understands and applies knowledge and experience of power system with full life-cycle project management of multiple large multi-discipline projects from proposal conception to commissioning and close-out, effectively track and stabilize projects, implement solutions for obstacles and anticipate customer needs, and related SEL products to complete complex assignments.</p></li><li><p>
Lead in training and assisting customers with the creation, design configuration, validation, installation, commissioning and operation of automation and/or protection systems.</p></li><li><p>
Lead in assigning, completing and implementing work within agreed upon scope, schedule and budget to a high level of quality and safety.</p></li><li><p>
Assist in the identification, preparation and presentation of successful proposals for SEL equipment, services, and systems.</p></li><li><p>
Mentor and develop professional staff. May supervise as necessary.</p></li><li><p>
Model, teach, and apply SEL Values, Principles of Operations, and World Class Manufacturing Principles.</p></li><li><p>
Understand. Create. Simplify.</p></li><li><p>
Other duties as assigned.</p></li></ul><p></p><p><b>
This job might be for you if you have:</b></p><ul><li><p>
B.S. In Electrical Engineering or relevant discipline.</p></li><li><p>
5+ years relevant application experience with electric power systems, industry practices, and project management practices and philosophies.</p></li><li><p>
Demonstrated knowledge of electric power system protection and control, integration and/or automation and communications applications.</p></li><li><p>
Demonstrated proven knowledge of electric power system design, studies, information and communication technology and protective relay applications.</p></li><li><p>
Willing to travel both domestically and internationally a minimum of 25% based on focus area.</p></li><li><p>
Strong writing, documentation, and speaking skills.</p></li><li><p>
Ability to learn new skills and assume new responsibilities.</p></li><li><p>
Ability to work cooperatively in a team environment.</p></li><li><p>
Background check results are satisfactory to SEL.</p></li><li><p>
Negative drug test result(s).</p></li></ul><p><b><br>
Preferred Qualifications</b></p><ul><li><p>
Professional Engineer License or equivalent certification.</p></li><li><p>
Electrical utility, industrial plant, consulting engineering, or system integrator experience.</p></li><li><p>
Project management experience.</p></li><li><p>
Working knowledge of Vision or other project management tracking software.</p></li></ul><p></p><p><b>
Location</b><br>
Saudi Arabia &ndash; Khobar</p><p></p><p><b>
Why SEL?</b><br>
<b>Competitive pay. Superior benefits. Inspiring work.</b></p><p></p><p>
We provide and take care of our employees with outstanding benefits, competitive pay, challenging work, and a rewarding career.</p><ul><li><p>
Top tier medical, prescription, dental, vision, life, and disability insurance.</p></li><li><p>
Varied leave plans like annual leaves, sick leaves, parental leaves etc. to maintain a healthy life balance.</p></li><li><p>
Yearly flight tickets to home country for expat employees and their family members based on their eligibility.</p></li><li><p>
Developmental programs like tuition assistance, internships, skill development courses and engineering development programs (EDP).</p></li><li><p>
Wellbeing benefits like free and confidential Employee Assistance Program (EAP) and reimbursable yearly gym membership.</p></li><li><p>
International Travel Medical and Security Assistance to assist our traveling employees and accompanying family members worldwide.</p></li></ul><p></p><p><b>
Pay Range Data</b><br>
We base our starting pay offer on location and job-related factors such as candidate experience, training, knowledge, and skills.</p><p></p><p><b>
Communication with Applicants</b><br>
We communicate with all applicants. If you do not receive a response about your application, please check your SPAM filter or reach out to us at careers@selinc.com.</p><p></p><p>
SEL is an Equal Opportunity Employer: Vets/Disabled.</p></div><p></p>

Project Engineer II - Project Manager

GE Vernova

<div><div><div>This job is a Machinist. Duties are subject to change as the assigned mentor sees fit. The duties laid out below is intended to provide the necessary skills to be a technical Machinist or to be a mechanical lead in the shop in the future.
<p></p><h1 class="jobSectionHeader"><b>Job Description</b></h1>
<p><b>Roles and Responsibilities:</b></p>
<ul><li><p>Read and interpret part drawings and process prints.</p>
</li><li><p>Will be required to perform work efficiently with no supervision.</p>
</li><li><p>Ability to perform run out check for an individual part.</p>
</li><li><p>Ability to perform run out check for rotating parts like generator, Turbine rotor.</p>
</li><li><p>Capable to do machining work on all stationary and rotating parts like Bearing, oil seal, shaft, etc.</p>
</li><li><p>Ability to do reaming, drilling, tapping, etc.</p>
</li><li><p>Ability to operate lathe machine, Tip grinding Machine without any supervision.</p>
</li><li><p>Ability to do various machining work</p>
</li><li><p>Capable to do burnishing and skim cut, patch ring, aluminum / cupper sleeves, threading, praising.</p>
</li><li><p>Ability to perform Run out by Accuscan machine.</p>
</li><li><p>Ability to operate the VBM.</p>
</li><li><p>Ability to train and coach others.</p>
</li><li><p>Work closely with Supervisors Engineer to ensure efficient operation of equipment.</p>
</li><li><p>Will be required to perform efficiently with little or no supervision.</p>
</li><li><p>Capable to use instrument for measurement check</p>
</li><li><p>Follow 5S (Sort, stabilize, shine, standardize, sustain) Lean Principles, safety rules and regulations.</p>
</li><li><p>Perform other duties as assigned.</p>
</li></ul><p></p><p><b>Qualifications Require:</b></p>
<ul><li><p>Diploma or Technical college degree or equivalent ( Mechanical , Electrical or similar discipline)</p>
</li><li><p>Knowledge in CNC machining, finishing, or related industrial manufacturing operations.</p>
</li></ul><p></p><p><b>Desired Characteristics:</b></p>
<ul><li><p>5 to 10-years total experience and minimum 3 years as Machinist.</p>
</li><li><p>Ability to read and communicate in English.</p>
</li><li><p>Curiosity and desire to learn and expand skill set.</p>
</li><li><p>adaptable and open to change.</p>
</li><li><p>Work in Change shifts , both Day &amp; Night shift</p>
</li></ul><p></p><h1 class="jobSectionHeader"><b>Additional Information</b></h1>
<div><div><div><div><div><div><div><p><b>Relocation Assistance Provided: </b>No</p></div></div></div></div></div></div></div></div></div></div><p></p>

Machinist

Hill International

<div><p>The Project Manager (Substation) is responsible for leading the PMC oversight and delivery of the Airport Substation and Medium Voltage Network Modernization Project, ensuring successful execution of all engineering, procurement, construction, testing, and commissioning activities. The role is responsible for managing project performance, stakeholder coordination, technical governance, and compliance with regulatory, operational, and safety requirements while maintaining uninterrupted airport operations. The position serves as the primary interface between the client, contractors, regulatory authorities, and project stakeholders to ensure the safe, timely, and cost-effective delivery of critical power infrastructure.</p></div>
<br><div><p>Project Leadership &amp; Management
</p><ul><li>Lead PMC activities for EPC/LSTK contractor execution of a new 34.5/13.8kV airport substation and MV network modernization project.
</li><li>Manage project scope, schedule, cost, quality, safety, and stakeholder coordination.
</li><li>Review and approve project execution plans, design execution plans, procurement plans, and construction methodologies.
</li><li>Monitor project milestones, progress reporting, risk management, and contract compliance.
</li><li>Interface with Airport Operations, Engineering, IT, Cybersecurity, HSSE, SEC, Matarat, and external stakeholders.
</li><li>Chair weekly and monthly project review meetings.
</li><li>Informs themselves of the relevant Quality, Environmental, Safety, and Occupational Health Policies, Manuals, and Procedures in place within Hill International, and ensures continued compliance with these requirements while employed by Hill.
</li>Perform other duties as assigned by the Project Director or line manager.<br>
<li>
</li></ul><p></p><p>Engineering Management
</p><ul><li>Manage and review all detailed engineering submissions at 60%, 90%, and IFC stages.
</li><li>Review FEED verification reports and ensure compliance with project objectives.
</li><li>Ensure compliance with SEC standards, Saudi Building Code, IEC, IEEE, NFPA, and airport operational requirements.
</li><li>Lead multidisciplinary engineering reviews involving:
<ul><li>Electrical
</li><li>Civil &amp; Structural
</li><li>Mechanical &amp; HVAC
</li><li>Fire Protection
</li><li>Communications
</li><li>SCADA/ADMS
</li><li>Cybersecurity systems
</li></ul></li>Review technical queries (TQs), design deviations, value engineering proposals, and constructability studies.<br>
<li>
</li></ul><p></p><p>Electrical Systems Oversight
</p><ul><li>Provide technical leadership for:
</li><li>Substations
</li><li>34.5kV Metal-Clad Switchgear
</li><li>13.8kV Metal-Clad Switchgear
</li><li>Busbar Systems
</li><li>Protection &amp; Control Systems
</li><li>Auxiliary AC/DC Systems
</li><li>Battery Banks and Chargers
</li><li>Station Service Transformers
</li><li>Transformers
</li><li>30/40MVA 34.5/13.8kV Power Transformers
</li><li>20/26.6MVA 34.5/13.8kV Power Transformers
</li><li>Oil-Filled Distribution Transformers
</li><li>Dry-Type Distribution Transformers
</li><li>Distribution Network
</li><li>34.5kV Distribution Loops
</li><li>13.8kV Distribution Loops
</li><li>Automated Smart RMUs
</li><li>Underground Duct Banks
</li><li>Utility Tunnel Cable Routing
</li><li>Cable Terminations and Jointing
</li><li>LV Systems
</li><li>Main Distribution Boards
</li><li>Automatic Transfer Schemes
</li><li>Emergency Power Systems
</li>UPS Integration<br>
<li>
</li></ul><p></p><p>Power System Studies &amp; Protection
</p><ul><li>Review and approve:
<ul><li>ETAP Studies
</li><li>Load Flow Analysis
</li><li>Short Circuit Analysis
</li><li>Arc Flash Studies
</li><li>Harmonic Analysis
</li><li>Relay Coordination Studies
</li><li>Motor Starting Studies
</li><li>Grounding Studies
</li></ul></li><li>Validate protection philosophies and relay settings.
</li><li>Ensure system reliability and N-1 redundancy requirements are achieved.
</li>Review SCADA integration and operational control strategies.<br>
<li>
</li></ul><p></p><p>Construction &amp; Site Supervision
</p><ul><li>Oversee site construction activities including:
<ul><li>Substation buildings
</li><li>Transformers
</li><li>RMUs
</li><li>MV/LV cable installation
</li><li>Utility tunnel works
</li><li>HDD crossings
</li><li>Duct banks
</li><li>Earthing systems
</li><li>Fire protection systems
</li></ul></li><li>Ensure airport operations are maintained without disruption during construction.
</li><li>Manage outage planning, switching programs, and energization activities.
</li>Verify compliance with approved IFC drawings and method statements.<br>
<li>
</li></ul><p></p><p>Testing, Commissioning &amp; Energization
</p><ul><li>Witness Factory Acceptance Tests (FAT).
</li><li>Witness Site Acceptance Tests (SAT).
</li><li>Review commissioning procedures and energization plans.
</li><li>Lead integrated testing of:
<ul><li>Transformers
</li><li>Switchgear
</li><li>Protection Relays
</li><li>RMUs
</li><li>SCADA Systems
</li><li>Communication Networks
</li></ul></li><li>Ensure successful cutover and transition to operational systems.
</li>Coordinate with the SEC and Airport Operations for energization approvals.<br>
<li>
</li></ul><p></p><p>Risk &amp; Stakeholder Management
</p><ul><li>Maintain the project risk register.
</li><li>Lead monthly risk workshops.
</li><li>Manage constructability reviews and interface management plans.
</li><li>Coordinate with:
</li><li>SEC
</li><li>National Grid
</li><li>Airport Operations
</li><li>IT &amp; Cybersecurity
</li><li>Airside Operations
</li><li>Utility Authorities
</li><li>Consultants and Contractors</li></ul></div><p></p>
<br><div><ul><li><p>Bachelor&rsquo;s degree in electrical engineering. Master's Degree in Power Systems Engineering preferred.
</p></li><li><p>Minimum 15&ndash;20 years of experience in Electrical Power Infrastructure Projects.
</p></li><li><p>Minimum 10 years in Project Management or PMC roles. 5 years in the Airport major projects
</p></li><li><p>Must have Professional certifications: Saudi Council of Engineers Registration. PMP Certification preferred. PE/Chartered Engineer preferred.
</p></li><li><p>Experienced in:
</p><ul><li><p>69kV/34.5kV/13.8kV substations
</p></li><li><p>Airport electrical infrastructure
</p></li><li><p>SEC utility projects
</p></li><li><p>Transmission and distribution systems
</p></li><li><p>SCADA and automation systems
</p></li></ul></li><li><p>Proven experience delivering EPC/LSTK substation projects above 34.5kV.
</p></li><li><p>Technical Skills:
</p><ul><li><p>Software
</p></li><li><p>ETAP
</p></li><li><p>AutoCAD
</p></li><li><p>BIM/Revit
</p></li><li><p>Primavera P6
</p></li><li><p>MS Project
</p></li><li><p>Power BI<br>
</p></li></ul></li><p></p><li><p>Standards Knowledge:
</p><ul><li><p>SEC Standards (TMSS, SDCS, SDMS), IEC 60076, IEC 62271, IEEE 80, EEE 1584
</p></li><li><p>NFPA 70
</p></li><li><p>NFPA 72
</p></li><li><p>SBC
</p></li><li><p>ICAO Annex 14</p></li></ul></li></ul></div>
<br><div><div>Hill International, with more than 4,300+ professionals in over 100 offices worldwide, provides program management, project management, construction management, project management oversight, advisory, facilities management, and other consulting services to clients in a variety of market sectors. Engineering News-Record magazine recently ranked Hill as one of the largest program management firms in the world. For more information on Hill, please visit our website at www.hillintl.com .<br>
</div><div></div><br>
<div>Hill is exclusively a program, project, and construction management provider, meaning we have one focus as a company: protecting client interests. Free of any potential conflicts, our entire business is geared towards helping clients achieve their desired outcomes. We are dedicated to exceeding expectations throughout the entire construction project lifecycle and adapt to the needs of each assignment to develop tailored approaches and solutions to meet those needs.<br>
</div><div></div><br>
<div>Hill is a GISI Consulting Group company, part of the Global Infrastructure Solutions, Inc. (GISI) family of companies. Learn more about GISI Consulting Group at www.gisiconsulting.com .<br>
</div><div></div><br>
<p><b>Hill International is an Equal Opportunity Employer/Veteran/Disabled
</b><br>
<br>
Note : <i>This job description is intended to provide an indication of the nature and levels of work, knowledge, skills, abilities and other essential functions to be carried out as part of fulfilling the role mentioned in the job title. Various other duties as required.</i></p></div>

Project Manager - Substation

Explore 29+ Electrical engineer aviation in Al Khobar this June. Find roles across top companies and apply now to boost your career.